ページ1に含まれる内容の要旨
ENGLISH ESPAÑOL
LYT1994-001B-M
INSTRUCTIONS
EN SP
MANUAL DE INSTRUCCIONES
MEMORY CAMERA
CÁMARA DIGITAL
Dear Customers
U
GZ-MS120
Thank you for purchasing
this memory camera. Before
use, please read the safety
information and precautions
contained in pages 2 and 3 to
ensure safe use of this product.
For Future Reference:
Enter the Model No. (located
on the bottom of the memory
camera) and Serial No. (located
on the battery pack mount of the
memory camera) below.
Model No.
Serial No.
Ap
ページ2に含まれる内容の要旨
Safety Precautions When the equipment is installed in a cabinet or on CAUTION a shelf, make sure that it has sufficient space on RISK OF ELECTRIC SHOCK DO NOT OPEN all sides to allow for ventilation (10 cm (3-15/16 ") or more on both sides, on top and at the rear). CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, Do not block the ventilation holes. DO NOT REMOVE COVER (OR BACK). (If the ventilation holes are blocked by a NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIE
ページ3に含まれる内容の要旨
ENGLISH Remember that this camcorder is intended for IMPORTANT SAFETY INSTRUCTIONS private consumer use only. 1. Read these instructions. Any commercial use without proper permission 2. Keep these instructions. is prohibited. (Even if you record an event such 3. Heed all warnings. as a show, performance or exhibition for personal 4. Follow all instructions. enjoyment, it is strongly recommended that you 5. Do not use this apparatus near water. obtain permission beforehand.) 6. Clean only wi
ページ4に含まれる内容の要旨
Easy Start Guide Charge the Battery Before Recording Turn off the camcorder and attach the battery pack. Access lamp Power/charge lamp blinks: Accessing files blinks: Charging goes out: Charging finished Do not remove the AC adapter, the battery pack or the SD card when the lamp is blinking. Open the cover Battery Pack The battery pack is not charged at the time of AC Adapter purchase. To AC Outlet (110V to 240V) CAUTION Be sure to use JVC battery packs. If you use any other battery packs b
ページ5に含まれる内容の要旨
ENGLISH Date/Time Setting Select [CLOCK SETTING] S CLOCK ADJUST Open the LCD monitor to CLOCK SETTING AREA SETTING Q turn on the camcorder SET FOR DAYLIGHT SAVING TIME Power button ( ) SET THE CITY, DATE AND TIME QUIT Select the city closest to T the area where you use the camcorder LCD monitor AREA SETTING Select [YES] within R 10 seconds GMT : JAN. 1.2009 01.00AM SET QUIT Slide your finger up and down on the sensor. Then touch OK. Select [ON] or [OFF] U Select [ON] if daylight saving ti
ページ6に含まれる内容の要旨
Video Recording CAUTION Before recording an important scene, it is recommended to conduct a trial • recording. Slide the mode switch to select ! (video) mode Q Select recording mode R The mode changes when you press the button. The auto recording indicator appears. Start recording S REC Remaining space on the SD Card Video Quality Record-standby Press the START/STOP [ ] 4h59m button to start recording, 0:04:01 and press it again to stop. REC Recording GZ-MS120US_IB_EN.indb 6 4/14/2009
ページ7に含まれる内容の要旨
ENGLISH Playing Back Select playback mode Q The mode changes when you press the button. Select the desired file R Index screen VIDEO PLAYBACK 1/2 NOV. 1. 2009 04:55PM DIGEST Select (Touch OK) S Playback screen 0:00:42 NOV. 1. 2009 04:55AM L To perform operations such as forward search or reverse search (Z p. 22) L To view files on TV (Z p. 25) CAUTION Do not forget to make copies after recording! To copy files onto DVD discs (Z p. 29) • To dub files using a VCR/DVD recorder (Z p.
ページ8に含まれる内容の要旨
Contents GETTING STARTED EDITING Accessories .......................................... 10 Managing Files ...................................... 26 Attaching the Core Filter ..............................10 Capturing a Still Image from a Video ...........26 Tripod Mounting ...........................................11 Deleting Files ...............................................26 Index ...................................................... 12 Indications on LCD Monitor ................. 14 CO
ページ9に含まれる内容の要旨
GETTING RECORDING/ USING FURTHER ENGLISH STARTED PLAYBACK WITH TV EDITING COPYING INFORMATION How to use the Touch Sensor Read This First! After the menu is displayed on the LCD monitor: Make a backup of important recorded data It is recommended to copy your important VIDEO recorded data to a DVD or other recording DUBBING PLAYBACK media for storage. JVC will not be Q PLAYBACK MPG FILE EDIT responsible for any lost data. ON-SCREEN DISPLAY SWITCH DISPLAYED CONTENTS SET QUIT Make a trial record
ページ10に含まれる内容の要旨
Accessories or AP-V20U/AP-V14U* BN-VF808U AV Cable AC Adapter Battery Pack USB Cable CD-ROM Core Filter (x2) NOTE Make sure to use the provided cables for connections. Do not use any other cables. * AP-V14U is not mentioned in the GUIDEBOOK in the supplied CD-ROM Attaching the Core Filter The core filter reduces interference caused when connecting to other devices. Connect the end of the cable with the core filter to the camcorder. Release the stopper. 3 cm (1-3/16") Wind twice. USB cable: Wi
ページ11に含まれる内容の要旨
GETTING ENGLISH STARTED Tripod Mounting Align the camcorder stud hole with the tripod stud, and the mounting socket with the screw, and then rotate the camcorder clockwise to mount it to the tripod. Bottom of the camcorder NOTE Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder. 11 GZ-MS120US_IB_EN.indb 11 4/14/2009 2:05:54 PM
ページ12に含まれる内容の要旨
GETTING STARTED Index B A NOTE The LCD monitor can rotate 270°. • Be careful not to cover 4, 5 and 6 during • shooting. 1 GZ-MS120US_IB_EN.indb 12 4/14/2009 2:05:55 PM DC DC DC
ページ13に含まれる内容の要旨
GETTING ENGLISH STARTED Camcorder ! Touch Sensor (Z p. 9) # OK Button $ MENU Button % Power Button [ ] & UPLOAD Button (Z p. 36) ( PLAY/REC Button (Z p. 19, 20, 22, 23) ) Mode Switch [ !, #] * DIRECT DVD Button (Z p. 28) INFO Button (Z p. 21) + SD Card Slot , EXPORT Button (Z p. 35) - AV Connector (Z p. 25, 34) . START/STOP Button (Z p. 19) / SNAPSHOT Button (Z p. 20) 0 Zoom Lever [W 7 , T] (Z p. 21) Speaker Volume Control [–VOL+] (Z p. 22) 1 Speaker 2 DC Connector 3 USB Connector [ 2 ] (Z
ページ14に含まれる内容の要旨
Indications on LCD Monitor During both Video and Still Image During Video Recording Only Recording NOV. 1. 2009 4:55 PM ! Mode Indicator # Export Mode Indicator ! Selected Recording Mode Indicator $ Counter (Z p. 24) % Upload Mode Indicator @ : Auto Mode & Video Quality: B (ULTRA FINE), 3 : Manual Mode (FINE), (NORMAL), (ECONOMY) C D E # Effect Mode Indicator ( Remaining Time $ Tele Macro Mode Indicator ) REC: (Appears during recording.) M % LED Light Indicator (Z p. 21) MQ: (Appe
ページ15に含まれる内容の要旨
GETTING ENGLISH STARTED During Video Playback During Still Image Playback 8 NOV. 1. 2009 4:55 PM NOV. 1. 2009 4:55 PM ! Mode Indicator ! Mode Indicator # Playlist Playback Indicator (Appears when # Folder/File Number $ Slide Show Playback Indicator playing back a playlist.) $ Video Quality: (ULTRA FINE), % Battery Indicator B & Date/Time (Z p. 16) C (FINE), D (NORMAL), E (ECONOMY) % Counter & Playback Mode : Playback F Q: Pause : Forward Search K J: Reverse Search G: Forward Slow-Mo
ページ16に含まれる内容の要旨
Necessary Settings before Use To detach the battery pack L Charging the Battery Pack 1 Close the LCD monitor to turn off the camcorder. 2 Attach the batter battery pac y pack, k, then connect then connect the AC adapter. With the “ ” (arrow) on the battery pack • pointing at the correct direction, slide the battery pack until it locks in place. NOTE You can also use the camcorder with just • the AC adapter. Arrow The actual recording time may shorten • depending on the recording env
ページ17に含まれる内容の要旨
GETTING ENGLISH STARTED 5 Select [CLOCK SETTING]. 6 Select the city closest to the area you are traveling. CLOCK ADJUST CLOCK SETTING AREA SETTING AREA SETTING SET FOR DAYLIGHT SAVING TIME SET THE CITY, DATE AND TIME SET QUIT GMT : NOV. 1.2009 04.55PM SET QUIT 6 Select the city closest to the area where you use the camcorder. To return to the previous screen L Select @. Selected area is highlighted To quit the screen AREA SETTING L Principal city of the Select [QUIT]. selected area Time di
ページ18に含まれる内容の要旨
Other Setting NOTE Using an SD Card Insert and remove the SD card only while • the power is turned off. Otherwise, data on If you want to record to an SD card, the the card may be corrupted. following operations need to be performed. Do not touch the terminal on the reverse • Operations are confirmed on the following • side of the label. SD cards. Class 4 or higher compatible SD or SDHC card Panasonic, TOSHIBA, R Change the recording medium SanDisk, ATP SD card (256 MB to 2 GB) or S
ページ19に含まれる内容の要旨
RECORDING/ ENGLISH PLAYBACK RECORDING/PLAYBACK Recording Files Video Recording Preparation: Open the LCD monitor to turn on the camcorder. • Insert an SD card. • Slide the mode switch to select Press PLAY/REC to select ! (video) mode. recording mode. PLAY/REC 0 : 00 : 00 SNAPSHOT Press START/STOP to start recording. 0 : 00 : 01 REC Approximate remaining time for recording You can also start/stop recording by selecting [REC] on the LCD monitor. (On-screen recording control) L To stop
ページ20に含まれる内容の要旨
Recording Files (Continued) Still Image Recording Preparation: Open the LCD monitor to turn on the camcorder. • Insert an SD card. • Slide the mode switch to select Press PLAY/REC to select the # (still image) mode. recording mode. [9999] FINE PLAY/REC Press and hold SNAPSHOT halfway. The ? indicator becomes green when the captured image is focused. L To view the last recorded image Press SNAPSHOT fully to take a Select A after shooting. still image. Selecting * during playback deletes
