ページ1に含まれる内容の要旨
ENGLISH
CONTENTS
SAFETY PRECAUTIONS 2 – 5
QUICK OPERATION GUIDE 6
MAJOR FEATURES 7
COMPACT
PROVIDED ACCESSORIES 7
VHS CAMCORDER
GETTING STARTED 8 – 15
RECORDING 16 – 30
GR-SXM320
Basic Recording ..........................16
Basic Features ...........................18
GR-SX851
Advanced Features ......................21
PLAYBACK 31 – 35
GR-AX750
Basic Playback ...........................31
Features ..................................32
Using The Cassette Adapter ...........33
Connections.........
ページ2に含まれる内容の要旨
2 EN Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual •All major sections and subsections are listed in the Table Of Contents on the cover. •Notes appear after most subsections. Be sure to read these as well. •Basic and advanced features/operation are separated for easier reference. It is recommended that you . . .
ページ3に含まれる内容の要旨
EN3 This camcorder is designed to be used with NTSC-type color television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor*/viewfinder playback are possible anywhere. Use the BN-V11U/V12U/V20U battery packs and, to recharge them, the provided multi-voltage AC Power Adapter/Charger. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.) *GR-SXM320 only. AT
ページ4に含まれる内容の要旨
4 EN 5. Ventilation IMPORTANT PRODUCT Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must SAFETY INSTRUCTIONS not be blocked or covered. • Do not block the openings by placing the product on a Electrical energy can perform many useful functions. bed, sofa, rug or other similar surface. But improper use can result in potential electrical • Do not place the product in a built-in installa
ページ5に含まれる内容の要旨
EN5 USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a •Do not place this product on an unstable cart, marked change in performance and you are unable stand, tripod, bracket or table. It may fall, causing to restore normal operation by following the detailed serious injury to a child or adult, and serious procedure in its operating instructions, do not damage to the product. attempt to service it yourself as opening or rem
ページ6に含まれる内容の要旨
QUICK OPERATION GUIDE 6 EN SUPPLY POWER INSERTING A VIDEO CASSETTE A Hook on. B Push in. PUSH Button EJECT Switch BATTERY RELEASE Using the battery pack 1 Open the LCD monitor fully (GR-SXM320 Hook its end to the camcorder and push the only). battery pack in until it locks in place . 2 Slide EJECT to open the cassette holder. (Charging procedure, Z pg. 8) 3 Insert a video cassette. To remove the battery pack 4 Press PUSH to close the cassette holder. Slide BATTERY RELEASE and pull out the batte
ページ7に含まれる内容の要旨
MAJOR FEATURES EN7 Integrated Auto Light TBC (Time Base Corrector) (GR-SXM320/SX851 only) (Z pg. 32) (Z pg. 20) Picture Stabilizer (Z pg. 18) Program AE with Special Effects (Z pg. 22) n Electronic Fog Filter n ND Effect n Sepia n Twilight n Sports n Nega/Posi n 1/2000 sec. High Speed Shutter Super VHS-ET (GR-SXM320/ Digital Hyper Zoom SX851 only) (Z pg. 13) (Z pg. 18) PROVIDED ACCESSORIES •AC Power •Cassette Adapter •Battery Pack Adapter/ (VHS Playpak) BN-V11U Charger C-P7U AA-V16U •Lithium Ba
ページ8に含まれる内容の要旨
GETTING STARTED 8 EN Battery pack BN-V11U, Power BN-V12U or BN-V20U This camcorder’s 3-way power supply system lets you Marks choose the most appropriate source of power. Do not use provided power supply units with other equipment. To AC outlet CHARGE CHARGING THE BATTERY PACK indicator Make sure you unplug the camcorder’s DC cord from 1 the AC Power Adapter/Charger. Plug the AC Adapter/ Charger’s power cord into an AC outlet. AC Power Align the marks and slide the battery pack in the Adapter/Ch
ページ9に含まれる内容の要旨
EN9 USING THE BATTERY PACK A Hook on. Hook its end to the camcorder and push the battery pack in until it locks in place . B Push in. •If the battery pack is attached in the wrong position, a malfunction may occur. To Detach The Battery Pack . . . .... slide BATTERY RELEASE and pull out the battery pack. Approximate recording time (unit: min.) LCD LCD LCD Battery pack monitor off/ monitor on/ monitor on/ Viewfinder on Viewfinder off Viewfinder on 12 3 1 1 BATTERY RELEASE Switch BN-V11U 90 105 1
ページ10に含まれる内容の要旨
GETTING STARTED (cont.) 10 EN Slot Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. Switch off the unit’s power and remove the power 1 supply unit (battery pack, AC Power Adapter/Battery Charger, etc.). Pull out the battery holder to remove it from the 2 camcorder. Battery holder Insert the battery in the holder, and be sure to have 3 the “+” mark visible. Slide the holder back into the slot until you hear a 4 click. NOTE
ページ11に含まれる内容の要旨
EN11 Date/Time Settings Set the Power Switch to “PRO.”. The power lamp 1 comes on. Press MENU. The Menu Screen appears. 2 Rotate the Select Wheel to move the highlight bar to 3 “NEXT” in Menu Screen 1 and press it to display Select Wheel Menu Screen 2. Then, rotate it to move the highlight bar to “DATE/TIME” and press it. The DATE/TIME Power Switch Menu appears. •To return to the previous settings, rotate the Select MENU Button Wheel to move the highlight bar to “EXIT” and press it, then go to s
ページ12に含まれる内容の要旨
GETTING STARTED (cont.) 12 EN Recording Mode Setting Set depending on your preference. Set the Power Switch to “AUTO” or “PRO.”. Press SP/ 1 EP for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “EP” (Extended Play) is more economical, providing three times the recording time. NOTE: Select Wheel If the recording mode is switched during recording, the playback picture will be blurred at the switching point. Power Switch SP/EP R
ページ13に含まれる内容の要旨
EN13 Recording Format Setting (GR-SXM320/ SX851 only) Set the recording format according to the format of the tape used or type of recording you wish to perform. Set the Power Switch to “PRO.”. Press MENU. 1 If a VHS cassette is loaded . . . Select Wheel 2 .... rotate the Select Wheel to move the highlight bar to “S-VHS ET”, then press it. The S-VHS ET Power Switch Setting Menu appears. If an S-VHS cassette is loaded . . . MENU Button .... rotate the Select Wheel to move the highlight bar to “S-
ページ14に含まれる内容の要旨
GETTING STARTED (cont.) 14 EN NOTES about S-VHS and S-VHS ET (GR-SXM320/SX851 only) n JVC EHG (Extra High Grade) tapes are recommended for superior results. Use S-VHS tape for storing recordings for an extended period or for recording important scenes, as it enables higher-quality recording and playback. n With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recommended that you do test record beforehand to make sure whether better results can be obtai
ページ15に含まれる内容の要旨
EN15 Grip Adjustment Power Zoom Lever Separate the Velcro strip. 1 Recording Pass your right hand through the loop and grasp the Start/Stop Button 2 grip. Adjust so that your thumb and fingers can easily 3 operate the Recording Start/Stop Button and Power Zoom Lever. Refasten the Velcro strip. 3 3 Viewfinder Adjustment 2 2 Set the Power Switch to “CAMERA” (“AUTO” or 180 180° ° 1 “PRO.”). Adjust the viewfinder manually for best viewability. 2 1 Turn the Diopter Adjustment Control until the 3 indi
ページ16に含まれる内容の要旨
RECORDING Basic Recording 16 EN NOTE: LENS COVER Open/Close Ring You should already have performed the procedures listed below. If not, do so before continuing. c Power (Z pg. 8) c Recording Mode Setting (Z pg. 12) c Load A Cassette (Z pg. 10) c Grip Adjustment (Z pg. 15) c Viewfinder Adjustment (Z pg. 15) Shooting While Watching The Viewfinder Power Switch Make sure the LCD monitor is closed and locked Recording Start/Stop Button (GR-SXM320 only). Turn the LENS COVER Open/ 1 Close Ring to open
ページ17に含まれる内容の要旨
EN17 NOTES: c When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power (GR-SXM320 only). c The cassette holder cannot be opened unless a power supply is attached. c There may be a delay after you slide EJECT until the cassette holder opens. Do not use force. c The time required to calculate the remaining tape length, and the accuracy of the calculation, may vary
ページ18に含まれる内容の要旨
RECORDING Basic Features 18 EN FEATURE: Zooming Zoom in (T: Telephoto) PURPOSE: To produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitry extends the maximum magnification offered by optical zoom. This system is called Digital Zoom out (W: Wide angle) Zoom. OPERATION: Zoom In Slide the Power Zoom Lever towards “T”. Display Zoom Out Slide the Power Zoom Lever towards “W”. Zoom indicator bar n The further you slide the Power Zoom Lever, the quicker th
ページ19に含まれる内容の要旨
EN19 5 SEC. REC Button FEATURE: Quick Review PURPOSE: To check the end of the last recording. RETAKE OPERATION: (2/3) 1) Set the Power Switch to “CAMERA” (“AUTO” or Button “PRO.”). 2) Press 2 and release quickly during the Record– Standby mode. n Tape is rewound for approx. 2 seconds and played back automatically, then pauses in Record–Standby mode for the next shot. NOTE: Distortion may occur at the start of playback. This is Display normal. FEATURE: Retake PAUSE PURPOSE: To re-record certain s
ページ20に含まれる内容の要旨
RECORDING Basic Features (cont.) 20 EN FEATURE:Video Light (GR-SXM320/SX851 only) PURPOSE: To brighten the scene when natural lighting is too dim. OPERATION: Set LIGHT OFF/AUTO/ON as required: OFF : Turns off the light. AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on the subject. ON : Always keeps the light on as long as the LIGHT OFF/AUTO/ON Switch camcorder is turned on. n The video light can only be used with the camcorder’s power on. n It is recomm
