ページ1に含まれる内容の要旨
INSTRUCTIONS ENGLISH LYT1249-001B
COMPACT VHS CAMCORDER
GR-SXM161
For Customer Use:
Enter below the Model No. and Serial No. which is
located on the bottom of the camcorder. Retain this
information for future reference.
Printed in Malaysia
Model No.
US
1203YDR-NF-VM
Serial No.
COPYRIGHT© 2003 VICTOR COMPANY OF JAPAN, LTD
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
pg. 3, 4) to ensure safe use of this product.
“PRECAUTIONS” (
AUTOMATIC DEMONSTR
ページ2に含まれる内容の要旨
PROVIDED ACCESSORIES • AC Adapter • Battery Pack AP-V14U or AP-V15U BN-V10U • Shoulder Strap • Lens Cap • Cassette Adapter • AA (R6) Battery C-P7U (for Cassette Adapter) NOTE: In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder. 2 GR-SXM161_01-05_EN 2 6/24/04, 2:29 PM
ページ3に含まれる内容の要旨
PRECAUTIONS SAFETY PRECAUTIONS CAUTIONS CAUTION • This camcorder is designed to be used with RISK OF ELECTRIC SHOCK DO NOT OPEN NTSC-type color television signals. It cannot be used for playback with a television of a different CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, standard. However, live recording and LCD DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. monitor/viewfinder playback are possible any- REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. where. • Us
ページ4に含まれる内容の要旨
® The EPA certified RBRC Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates JVC is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States. The RBRC® program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery r
ページ5に含まれる内容の要旨
INDEX A P AC Adapter ................................................................. pg. 6 Picture Stabilizer ...................................................... pg. 18 Animation Recording ................................................pg. 21 Playback .................................................................. pg. 11 Auto Date Record ....................................................pg. 21 Program AE with Special Effects ............................. pg. 23 Auto Focus ............
ページ6に含まれる内容の要旨
USING THE BATTERY PACK GETTING STARTED Perform step 1) of “CHARGING THE BATTERY Hook on. PACK”. Approximate recording time (unit: min.) Battery pack Viewfinder on LCD monitor on BN-V10U 95 80 Push in. (50) (45) BN-V12U 100 85 (optional) (55) (50) BN-V20U 160 140 (optional) (85) (80) BATTERY RELEASE Switch Power Switch BN-V400U 380 330 (optional) (210) (195) ( ):when the video light is on Battery pack USING AC POWER Connect the AC Adapter to the camcorder ( step To DC IN 2) and 3) of “CHARGING
ページ7に含まれる内容の要旨
STORE BATTERY: Date/Time Settings Be sure to fully discharge a battery pack by 1) Set the Power Switch @ to “ ” while pressing performing the following steps before storing it for down the Lock Button ! located on the switch. a long period of time, otherwise the battery 2) Press the MENU Wheel 1 in. The Menu Screen performance will be reduced. appears. 1) Attach the battery to the camcorder with no 3) Rotate the MENU Wheel 1 to select cassette inserted. “3TO SYSTEM MENU” and press it to display
ページ8に含まれる内容の要旨
Grip Adjustment Tripod Mounting 1) Separate the Velcro strip. Align the screw and camera direction stud on the 2) Pass your right hand through the loop and grasp tripod with the tripod mounting socket Q. Then the grip. tighten the screw. 3) Adjust so that your thumb and fingers can easily CAUTION operate the Recording Start/Stop Button 0 and Power Zoom Lever 3. Refasten the Velcro strip. When using a tripod, be sure to open and extend 3 its legs fully to stabilize Q the camcorder. To prevent da
ページ9に含まれる内容の要旨
CONTROLS, CONNECTORS AND INDICATORS Eyepiece Refer to this diagram while reading the instructions. 12 34 During shooting # $ % ^ &*( 5 Keep the lens cap attached to 6 the camcorder. 7 )q w e r 8 Cassette holder 9!0@ Viewfinder t Turn the gear to 90 90°° i 180° take up slack. Speaker y o u t 180° LCD monitor Erase protection tab Q p Microphone Video light LCD Monitor/Viewfinder Indications During Recording During Playback W ERT Y UI F G H JK L : O 120M I N A S–ET T30 S–ET SP 4 – : : P REC SP TBC
ページ10に含まれる内容の要旨
1 • MENU Wheel [–, +] ................................ pg. 18 W Tape Remaining Time .............................. pg. 21 • BRIGHT Wheel [–, +] .............................. pg. 11 E Recording Mode Indicator ....................... pg. 20 • Speaker Volume Control [VOL.] ............. pg. 11 R Video Light Indicator ................................ pg. 13 • TRACKING Wheel [–, +] ........................ pg. 14 T Backlight Compensation Indicator ........... pg. 12 2 5-Second Recording Butt
ページ11に含まれる内容の要旨
RECORDING PLAYBACK Set REC MODE, S-VHS (S-VHS ET), TAPE 1 Load a tape ( pg. 8, “Loading/Unloading A LENGTH and DATE/TIME in SYSTEM MENU. Cassette”). pg. 18 – 22, “MENU SETTINGS”) ( 2 Set the Power Switch @ to “PLAY” while pressing down the Lock Button ! located on the 1 Remove the lens cap. Set the Power Switch @ switch. To start playback, press 4/6 &. to “ ” or “ ” while pressing down the Lock To stop playback temporarily (Still Playback), press Button ! located on the switch. 4/6 &. To stop
ページ12に含まれる内容の要旨
Backlight Compensation BASIC FEATURES To quickly increase the brightness of the subject relative to the background. 5Sec. Rec (5-sec. Recording) 1) Press BACK LIGHT r during recording. “ ” is To record a scene for 5 seconds, providing quick displayed and the subject is brightened. scene transitions like those seen in TV 2) To cancel Backlight Compensation, press BACK programs. LIGHT r again. “ ” disappears and the 1) Make sure the recording mode is set to “SP”. brightness returns to the previous
ページ13に含まれる内容の要旨
Video Light Zooming To brighten the scene when natural lighting is too To produce the zoom in/out effect. Digital circuitry dim. extends the maximum magnification offered by Pressing “ LIGHT ” # changes the Video Light optical zoom. This system is called Digital Zoom. mode sequentially as shown below. • Slide the Power Zoom Lever 3 towards “T” to zoom in, or “W” to zoom out. OFF (no indication) AUTO ( ) ON ( ) • The further you slide the Power Zoom Lever 3, the quicker the zoom acti
ページ14に含まれる内容の要旨
Tracking Counter Memory Eliminates noise bars that appear on-screen during Makes it easier to locate a specific tape segment. playback. To activate Manual Tracking: 1) Press COUNTER R/M w and hold for more than 1) Press the TRACKING Wheel 1 for approx. 1 second. The counter J resets to “0:00:00”. 2 seconds. “MT” : appears. 2) Press COUNTER R/M w for less than 1 second. 2) Rotate the TRACKING Wheel 1 so that the “M” appears. noise bars disappear. 3) After recording or playback, press 5 r, then •
ページ15に含まれる内容の要旨
Connections To A TV/VCR Tape Dubbing 1) Make sure all units are turned off. 1) Connect the camcorder and the VCR 2) Connect the camcorder to a TV or VCR using ( “Connections To A TV/VCR”). Set the Power optional video and audio cables. If using both Switch @ to “PLAY” while pressing down the TV and VCR, connect the VCR output to the TV Lock Button ! located on the switch, turn on input. the VCR’s power, and insert the appropriate 3) Turn on all units. Set the VCR to its AUX input cassettes in t
ページ16に含まれる内容の要旨
Using The Cassette Adapter Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a S-VHS/ VHS VCR. 1) Slide the battery cover up to remove it, install one “AA (R6)” size battery, then reattach the cover. 2) Slide the latch to open the compartment door, then insert the cassette and close the compartment door. 3) Load the cassette adapter into the VCR and play the tape back. 4) Slide the latch and the compartment door opens automatically. This may take around 10 sec
ページ17に含まれる内容の要旨
INSTRUCTIONS Eyepiece Refer to this diagram while reading the instructions. 12 34 During shooting # $ % ^ &*( 5 Keep the lens cap attached to 6 the camcorder. 7 )q w e r 8 Cassette holder 9!0@ Viewfinder t Turn the gear to 90° 90° 180° i take up slack. Speaker y o u t 180° LCD monitor Erase protection tab Q p Microphone Video light LCD Monitor/Viewfinder Indications During Recording During Playback W ERT Y UI F G H JK L : O – 120M I N A S–ET T30 S ET SP 4 – : : P REC SP TBC 1 2 3 4 5 444 TWI L I
ページ18に含まれる内容の要旨
CAMERA MENU MENU SETTINGS EXPOSURE 1 Set the Power Switch @ to “ ” while pressing Manual exposure adjustment is recommended in down the Lock Button ! located on the switch. the following situations: 2 Press the MENU Wheel 1 in. The Menu • When shooting using reverse lighting or when the Screen appears. Rotate the MENU Wheel 1 to background is too bright. select the desired function. • When shooting on a reflective natural background • To go from CAMERA MENU to SYSTEM MENU, such as at the beach o
ページ19に含まれる内容の要旨
M.W.B. TITLE If the white balance is correct, all other colors will Allows you to superimpose one of eight preset be accurately reproduced. titles. •j shows the selected title which remains until AUTO : White balance is adjusted OFF is selected. automatically. FINE : Outdoors on a sunny day. TITLE SETUP CLOUD : Outdoors on a cloudy day. Adjust the settings for TITLE. HALOGEN : A video light or similar type of SIZE : When “LARGE” is selected, the title lighting is used. is twice enlarged verti
ページ20に含まれる内容の要旨
SYSTEM MENU • With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is This Menu Screen cannot be accessed while recommended that you do test record beforehand recording. to make sure whether better results can be REC MODE obtained. Allows you to set the recording mode. “EP” • If the S-VHS ET mode or recording format is (Extended Play) is more economical, providing switched during recording, the playback picture three times the recording time. will be blurr
