ページ1に含まれる内容の要旨
COMPACT VHS CAMCORDER
CONTENTS
GETTING STARTED 6 – 13
Power............................................. 6
GR-FXM45
Clock (Lithium) Battery Insertion/Removal ... 8
Date/Time Settings ............................. 9
Recording Mode Setting ...................... 10
Tape Length Setting ........................... 10
GR-FXM15
Loading/Unloading A Cassette .............. 11
Grip Adjustment ............................... 12
Viewfinder Adjustment ....................... 12
Shoulder Strap Attachment ...
ページ2に含まれる内容の要旨
2 EN Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety informa- tion and precautions contained in the following pages to ensure safe use of your new camcorder. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents (Z cover page). • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference. It is recommended t
ページ3に含まれる内容の要旨
EN3 ATTENTION USERS OF RECHARGEABLE BATTERIES DO NOT DISPOSE RECHARGEABLE BATTERIES OR PRODUCTS POWERED BY NON- REMOVABLE RECHARGEABLE BATTERIES, THESE BATTERIES AND PRODUCTS CAN BE RECYCLED. AT THE END OF NORMAL LIFE, IN AUSTRALIA, RETURN TO YOUR POINT OF PURCHASE OR MAIL TO: Hagemeyer (Australasia) B.V. 5-7 Garema Circuit Kingsgrove NSW 2208 Australia Attn : Service Dept. Phone : (02)750 3777 IN NEW ZEALAND, PLEASE RETURN BATTERIES BY MAIL TO: Hagemeyer (NZ) Limited P.O. Box 100589 Auckland 1
ページ4に含まれる内容の要旨
MAJOR FEATURES 4 EN REMEMBER Picture Stabilizer (Z pg. 20) Digital Hyper Zoom (Z pg. 18) Zoom in Programme AE with Special Zoom out Effects (Z pg. 24, 25) n Electronic Fog Filter n ND Effect n Sepia n Twilight PROVIDED ACCESSORIES n Sports n Nega/Posi n 1/2000 sec. High Speed Shutter LCD Colour Monitorc (Z pg. 16) • AC Power Adapter/ •Cassette Adapter Charger AA-V15EA C-P7U TW • Remote Control • Battery Pack RM-V700U BN-V20U (GR-FXM45 only) Snapshot (GR-FXM45 only) (Z pg. 22) •Editing Cable •
ページ5に含まれる内容の要旨
QUICK OPERATION GUIDE EN5 SUPPLY POWER INSERTING A VIDEO CASSETTE A Hook on. 4 PUSH Button B Push in. 3 1 2 EJECT Switch BATTERY RELEASE 1 Open the LCD monitor to an angle of over 60 Using the battery pack degrees. Hook its end to the camcorder ( ) and push the 2 Slide EJECT to open the cassette holder. battery pack in until it locks in place ( ). (Charging procedure, Z pg. 6) 3 Insert a video cassette. 4 Press PUSH to close the cassette holder. To remove the battery pack (For more details, Z pg
ページ6に含まれる内容の要旨
GETTING STARTED 6 EN Marks Power To AC outlet This camcorder’s 3-way power supply system lets you choose the most appropriate source of power. CHARGE indicator NOTES: c No function is available without power supply. c Use only the specified power supply. c Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK REFRESH switch SUPPLY POWER REFRESH indicator 1 Connect the charger’s AC power cord to a wall outlet. ATTACH BATTERY PACK REFRESH 2 Align the marks and slid
ページ7に含まれる内容の要旨
EN7 Charge Marker Charge marker A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colours are provided (red and black)—you choose which one means charged and which means discharged. NOTES: c The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time. c Charging times noted on page 6 are
ページ8に含まれる内容の要旨
GETTING STARTED (cont.) 8 EN Slot Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’s power and remove the power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.). REMOVE BATTERY HOLDER 2 Pull out the battery holder. Battery holder INSERT BATTERY IN HOLDER 3 Insert the battery in the holder, and be sure to have the “+” mark visible. RE-INSERT HOLDER 4 Slide the holder
ページ9に含まれる内容の要旨
EN9 Date/Time Settings ACCESS MENU SCREEN 1 Set the Power Switch to “PRO.”, then press MENU. •The power lamp comes on. SELECT FUNCTION 2 Rotate the Select Dial to move the highlight bar to “DATE/TIME”, then press it. The DATE/TIME Menu appears. •If you decide you want to return the date and time MENU Button to the previous settings, rotate the Select Dial to move the highlight bar to “EXIT” and press it, then Power lamp go to step 6. •If you want to set only the time without changing the date, g
ページ10に含まれる内容の要旨
GETTING STARTED (cont.) 10 EN Recording Mode Setting Set depending on your preference. SET RECORDING MODE 1 First set the Power Switch to “AUTO” or “PRO.”. Press SP/LP for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “LP” (Long Play) is more economical, providing twice the recording time. NOTE: MENU Button If the recording mode is switched during recording, the playback picture will be blurred at the switching point. SP/LP R
ページ11に含まれる内容の要旨
EN11 Cassette holder Loading/Unloading A Cassette OPEN LCD MONITOR 1 Open the LCD monitor to an angle of over 60 degrees. OPEN CASSETTE HOLDER 2 Slide EJECT until the holder opens. Do not use force to open. INSERT/REMOVE CASSETTE 3 Make sure the label is facing outward. PUSH Button EJECT Switch CLOSE CASSETTE HOLDER 4 Press PUSH and make sure the holder is closed and locked. CLOSE LCD MONITOR 5 First make sure the holder is closed. Then close the LCD monitor. Turn to take NOTES: up slack. c Clos
ページ12に含まれる内容の要旨
GETTING STARTED (cont.) 12 EN Power Zoom Lever Grip Adjustment EXPAND LOOP 1 Separate the Velcro strip. INSERT HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Lever. Refasten the Velcro strip. Recording Start/Stop Button Viewfinder Adjustment SELECT OPERATION MODE 1 3 3 Set the Power Switch to “CAMERA” (“AUTO” or “PRO.”). 2 2 POSITION VIEWFINDER 2 180 18
ページ13に含まれる内容の要旨
EN13 Shoulder Strap Attachment ATTACH STRAP 1 Following the illustration on left, thread the strap through the top of the eyelet 1, then fold it back and thread it through the buckle 2. Repeat the procedure 1 to attach the other end of the strap to the other eyelet 4 3, making sure the strap is not twisted. 2 ADJUST LENGTH 2 Adjust as shown in the illustration on left 4. 3 Tripod Mounting ALIGN AND TIGHTEN 1 Align the screw and camera direction stud on the tripod with the camera’s mounting socke
ページ14に含まれる内容の要旨
RECORDING Basic Recording 14 EN LENS COVER Open/Close Ring NOTE: You should already have performed the procedures listed below. If not, do so before continuing. c Power (Z pg. 6) c Recording Mode Setting (Z pg. 10) c Tape Length Setting (Z pg. 10) c Grip Adjustment (Z pg. 12) c Viewfinder Adjustment (Z pg. 12) LOAD A CASSETTE 1 First open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to Pow
ページ15に含まれる内容の要旨
EN15 Tape remaining time indicator STOP RECORDING 4 25MIN Press the Recording Start/Stop Button again to stop MIN (Now calculating) recording. •The camcorder re-enters the Record-Standby mode. 120MIN NOTES: c When the Power Switch is set to “CAMERA” and the 119MIN LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power. 3MIN c The cassette holder cannot be opened unless a power supply is attached. c There ma
ページ16に含まれる内容の要旨
RECORDING Basic Recording (cont.) 16 EN Shooting While Watching The LCD Monitor Before the following steps, perform step 1 (Z pg. 14). 90° 180° ENTER RECORD–STANDBY MODE 2 Make sure the LCD monitor is fully open. Turn the LENS COVER Open/Close Ring to open the lens cover, then set the Power Switch to “CAMERA” (“AUTO” or “PRO.”). •The power lamp lights and the camcorder enters the Record-Standby mode. •The scene you are aimed at appears in the LCD LENS COVER Open/Close Ring monitor, with the wor
ページ17に含まれる内容の要旨
EN17 Journalistic Shooting In some situations different angles of shooting may be required for more dramatic results. OPEN LCD MONITOR 1 Make sure the LCD monitor is fully open. TILT LCD MONITOR 2 Tilt the LCD monitor in the most convenient direction. •The LCD monitor can rotate almost full circle (270°: 90° downward, 180° upward). Interface Shooting The person you shoot can view himself/herself in the LCD monitor, and you can even shoot yourself while viewing your own image in the LCD monitor.
ページ18に含まれる内容の要旨
RECORDING Basic Features 18 EN FEATURE: Zooming Zoom in PURPOSE: To produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitry extends the maximum magnification offered by optical zoom. This system is called Digital Zoom out Zoom. OPERATION: Zoom In Push the Power Zoom Lever towards “T”. Display Zoom Out Push the Power Zoom Lever towards “W”. Zoom indicator bar n The harder you push the Power Zoom Lever, the quicker the zoom action. 1X Zoom level indica
ページ19に含まれる内容の要旨
EN19 FEATURE: Quick Review PURPOSE: To check the end of the last recording. OPERATION: 1) Press “ ” and release quickly during the Record– Standby mode. n Tape is rewound for about 1 second and played back automatically, then pauses in Record–Standby mode for the next shot. NOTE: Distortion may occur at the start of playback. This is normal. RETAKE (R/F) Button FEATURE: Retake PURPOSE: To re-record certain segments. OPERATION: 1) Make sure the camcorder is in the Record–Standby mode. 2) Press an
ページ20に含まれる内容の要旨
RECORDING Basic Features (cont.) 20 EN 5 SEC. REC Button FEATURE: Picture Stabilizer P.STABILIZER Button PURPOSE: To compensate for unstable images caused by camera- shake, particularly at high magnification. OPERATION: 1) Press P.STABILIZER. “ ”appears. n To switch off the Picture Stabilizer, press P.STABILIZER. The indicator disappears. NOTES: c Accurate stabilisation may not be possible if hand shake is excessive, or under the following condi- tions: • When shooting subjects with vertical or
