ページ1に含まれる内容の要旨
ENGLISH
CONTENTS
AUTOMATIC DEMONSTRATION 7
GETTING STARTED 8 – 17
BASIC RECORDING 18 – 24
Recording On Tape ............................... 18
Recording On Memory Card ................... 21
Recording On Tape And Memory Card ...... 22
DIGITAL VIDEO CAMERA
BASIC PLAYBACK 25 – 27
Playback From Tape.............................. 25
Playback From Memory Card .................. 26
USING MENUS FOR
GR-DV3000
DETAILED ADJUSTMENT 28 – 33
ADVANCED FEATURES 34 – 53
CONNECTIONS 54 – 57
Please visit our Home
ページ2に含まれる内容の要旨
2 EN Dear Customer, Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents on the cover page. • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference. It is recommended that you .
ページ3に含まれる内容の要旨
EN 3 When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.) No naked flame sources, such as lighted candles, should be placed on the apparatus. When discarding batteries, environmental problems must be considered and the
ページ4に含まれる内容の要旨
4 EN PROVIDED ACCESSORIES AC Power Adapter/Charger Remote Control Unit Jack Box Battery Pack AA-V40EA, AA-V40A, RM-V717U CU-V504U BN-V408U AA-V40SH or AA-V40ED S-Video cable DC Cord Editing Cable Audio/Video Cable (ø3.5 mini-plug to RCA plug) Audio Cable Lens Hood Lens Cap USB Cable (for connection (Already attached ( pg. 5 for of optional to the camcorder attachment) headphones) pg. 5) Memory Card (8 MB) AAA (R03) Battery x 2 (Already inserted in Shoulder Strap CD-ROM (for remote control uni
ページ5に含まれる内容の要旨
EN 5 How To Detach/Attach The Lens Hood To detach: Turn the lens hood The provided lens hood helps block counterclockwise. out glare when shooting under bright sunlight, the same way professional photographers do. Threading To attach: Align the lens hood with the camcorder’s lens and screw it in clockwise. How To Attach The Lens Cap To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration. NOTE: To confirm the lens cap is on correctly make sure the cap is f
ページ6に含まれる内容の要旨
6 EN How To Use Audio Cables When using an optional headphones, connect to the provided Audio cable (with a core filter attached), then connect the Audio cable to the camcorder. The core filter reduces interference. Headphones Audio cable To PHONE Core Filter
ページ7に含まれる内容の要旨
EN 7 AUTOMATIC DEMONSTRATION Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset). Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch is set to “ ” or “ ” and no cassette is in the camcorder. Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume. “DEMO MODE” remains “ON” even if the
ページ8に含まれる内容の要旨
8 EN GETTING STARTED Power Battery pack BN-V408U, This camcorder’s 2-way power supply system lets BN-V416U or you choose the most appropriate source of power. Do To AC outlet BN-V428U not use provided power supply units with other equipment. CHARGING THE BATTERY PACK AC Power Adapter/ 1 Make sure you unplug the camcorder’s DC cord Charger from the AC Power Adapter/Charger. Plug the AC Adapter/Charger’s power cord into an AC outlet. The POWER indicator lights. POWER 2 Attach the battery pack with
ページ9に含まれる内容の要旨
EN 9 USING THE BATTERY PACK 1 With the arrow on the battery pack pointing upward, push the battery pack slightly against the battery pack mount 1. 2 Slide up the battery pack until it locks in place 2. 2 1 • If the battery pack is attached with its mark set in the wrong direction, a malfunction may occur. To Detach The Battery Pack . . . ..... slide the battery pack down slightly while sliding down BATT. RELEASE to detach it. BATT. RELEASE Switch Approximate recording time Battery LCD monitor o
ページ10に含まれる内容の要旨
10 EN GETTING STARTED (cont.) Grip Adjustment Power Zoom Lever 1 Separate the Velcro strip. Recording Start/Stop button 2 Pass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip, to easily operate the Recording Start/Stop button and Power Switch and Power Zoom Lever. Be sure to Lock Button fasten the Velcro strip to your preference. Power Switch Viewfinder Adjustment Dioptre 1 Set the Power Switch to “ ” or “ ” while Adjustment pressing down th
ページ11に含まれる内容の要旨
EN 11 Power Switch Date/Time Settings The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback Power Lamp ( pg. 31, 32). 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, and open the LCD monitor fully or pull out the viewfinder fully. The power lamp lights and the camcorder is turned on. 2 Press the MENU wheel in. The Menu Screen appears. 3 Rotate the MENU wheel to select “ DISPLAY”. Lock Button Press i
ページ12に含まれる内容の要旨
12 EN GETTING STARTED (cont.) Loading/Unloading A Cassette Erase protection tab* The camcorder needs to be powered up to load or eject a cassette. 1 Slide and hold OPEN/EJECT in the direction of Make sure the window side is the arrow then pull the cassette holder cover open facing out. until it locks. The cassette holder opens automatically. • Do not touch internal components. PUSH HERE Cassette holder 2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder. • Once the cass
ページ13に含まれる内容の要旨
EN 13 Card Cover Loading A Memory Card The provided memory card is already inserted in the camcorder when you receive the camcorder. 1 Make sure the camcorder’s power is off. 2 Open the card cover (MEMORY CARD). 3 Insert the memory card clipped edge first. • Do not touch the terminal on the reverse side of the label. 4 To close the card cover, push it until you hear a click. To Unload A Memory Card . . . ..... in step 3 push the memory card, which then comes out of the camcorder automatically. P
ページ14に含まれる内容の要旨
14 EN GETTING STARTED (cont.) To turn on the camcorder, first set the Power Operation Mode Switch to any operation mode except “OFF” while Choose the appropriate operation mode according to pressing down the Lock Button located on the your preference using the Power Switch and VIDEO/ switch, then pull out the viewfinder fully or open MEMORY Switch. the LCD monitor fully. Power Switch Position VIDEO/MEMORY Switch (Open the LCD monitor (Manual): to access this switch.) Allows you to set various
ページ15に含まれる内容の要旨
EN 15 Power Switch Recording Mode Setting Set the tape recording mode depending on your Power Lamp preference. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, and open the LCD monitor fully or pull out the viewfinder fully. The power lamp lights and the camcorder is turned on. 2 Press the MENU wheel in. The Menu Screen appears. 3 Rotate the MENU wheel to select “ CAMERA” Lock Button and press it. The CAMERA Menu appears. 4 Rotate the MENU wheel to select
ページ16に含まれる内容の要旨
16 EN GETTING STARTED (cont.) Power Switch Picture Quality/Image Size Setting The Picture Quality/Image Size can be selected to best match your needs. Refer to the chart on page 17 Power Lamp for your selection. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, and open the LCD monitor fully or pull out the viewfinder fully. The power lamp lights and the camcorder turns on. 2 Press the MENU wheel in. The Menu Screen appears. 3 Rotate the MENU wheel to sele
ページ17に含まれる内容の要旨
EN 17 STORAGE CAPACITY The number of storable images depends on the selected picture quality and size as well as the composition of the subjects in the images. Approximate number of storable images SD Memory Card (optional) IMAGE SIZE QUALITY 8 MB* 16 MB 32 MB 64 MB FINE 32 98 205 405 640 x 480 STANDARD 110 295 625 1215 FINE 14 46 98 190 1024 x 768 STANDARD 46 145 310 605 FINE 9 28 62 120 1280 x 960 STANDARD 30 98 205 405 FINE 618 40 78 1600 x 1200 STANDARD 20 62 130 260 * Since sound effects (
ページ18に含まれる内容の要旨
18 EN BASIC RECORDING Recording On Tape NOTE: Power lamp You should already have performed the procedures listed below. If not, do so before continuing. Power Switch ● Power ( pg. 8) ● Grip Adjustment ( pg. 10) Tally lamp ● Viewfinder Adjustment ( pg. 10) (lights while ● Load A Cassette ( pg. 12) recording is ● Recording Mode Setting ( pg. 15) in progress) 1 Press in the tabs on the lens cap to remove it. Press PUSH OPEN, open the LCD monitor and set the VIDEO/MEMORY Switch to “VIDEO”. 2 S
ページ19に含まれる内容の要旨
EN 19 NOTES: ● When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this happens, use the viewfinder instead. ● The image will not appear simultaneously in the LCD monitor and the viewfinder except during Interface Shooting. It will appear in the viewfinder when the LCD monitor is in the lock position, and it will appear on the LCD monitor when fully extended. ● The cassette holder cannot be opened unless a power supply is attached. ● There may be
ページ20に含まれる内容の要旨
20 EN BASIC RECORDING Recording On Tape (cont.) Snapshot (For Tape Recording) SNAPSHOT Button This feature lets you record still images that look like photographs onto a tape. SNAPSHOT MODE SELECTION Power Switch 1 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully. 2 Press the MENU wheel in. The Menu Screen Lock Button appears. VIDEO/MEMORY Switch 3 Rotat