ページ1に含まれる内容の要旨
1
HITACHI
Instruction Manual
Video Camera/Recorder
VM-1700A / VM-2700A
Hitachi Home Electronics (America), Inc. HITACHI (HSC) CANADA
INC.
3890 Steve Reynolds Blvd., Norcross, GA 30093 3300 Trans Canada Hwy.,
Pointe Claire,
Tel. 404-279-5600 Quebec, H9R1B1, CANADA
Tel. 514-697-9150
HITACHI SALES CORPORATION OF HAWAII, INC.
3219 Koapaka Street, Honolulu, HI 96819
Tel. 808-836-3621
P QR10512 ©Hitachi, Ltd. 1994 Printed in Japan
ページ2に含まれる内容の要旨
WARNINGS ........................................................................................................................................... 4 PRECAUTIONS ..................................................................................................................................... 6 PRECAUTIONS........................................................................................................................................ 6 FEATURES..................................
ページ3に含まれる内容の要旨
CAMERA/RECORDER TO VCR DUBBING .................................................................................... 53 AUTOMATIC REWIND...................................................................................................................... 54 FLYING ERASE HEAD (only for VM-2700A) .................................................................................. 55 USING THE BUILT-IN CAMERA LIGHT (only for VM-2700A) ....................................................56 To rep
ページ4に含まれる内容の要旨
WARNINGS WARNINGS WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be r
ページ5に含まれる内容の要旨
WARNINGS is connected. --Consult the dealer or an experienced radio/TV technician for help. Caution to the user: Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. CAUTION: Avoid operating your camcorder immediately after moving it from a cold area to a warm humid area. Give the camcorder 2 to 3 hours to acclimate to the surroundings before inserting a video cassette. When moved from a cold area to a warm humid a
ページ6に含まれる内容の要旨
PRECAUTIONS PRECAUTIONS Thank you for choosing the video camera/recorder. For maximum pleasure and convenience please read these simple instructions before operating your camera/recorder. PRECAUTIONS Any problems that occur as a result of any of the following conditions will not be covered by our warranty. Be careful that no water, dust, or sand enters the camera/recorder. When you are not using the camera/recorder, switch off the power and attach the lens cap. When yo
ページ7に含まれる内容の要旨
PRECAUTIONS FEATURES • Solid-state camera pickup • High Quality picture technology • Auto focus power zoom Lens with macro feature • Full record and playback capability with standard cassette • Program AE (Auto Exposure) • Flying erase head (Only for VM-2700A) • Built-in camera light (Only for VM-2700A) • Time and date • Titler • Index signal * This video camera/recorder with this marking incorporates high- quality picture technology and is compatible with any video cassette reco
ページ8に含まれる内容の要旨
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of a Video Camera/Recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy place
ページ9に含まれる内容の要旨
IMPORTANT SAFEGUARDS and have it replaced by your service technician if appearance indicates damage or deteriorated insulation. 7 Power Cord Protection -- Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 8 Ventilation -- Slots and openings in the cabinet are provided f
ページ10に含まれる内容の要旨
IMPORTANT SAFEGUARDS excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 12 Outdoor Antenna Grounding -- If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the
ページ11に含まれる内容の要旨
IMPORTANT SAFEGUARDS SERVICE 17 Servicing -- Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18 Conditions Requiring Service -- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged b. If liquid has been spilled or obj
ページ12に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER 1. Save these instructions - This page contains important safety and operating instructions for AC Adaptor/Charger Model VM-AC68A (T) 2. Before using AC Adaptor/Charger, read all instructions and cautionary markings on (1) AC Adapter/Charger, (2) battery and (3) product using battery. 3. Also read all instructions on pages 4 and 5. 4. Caution--To reduce the risk of injury, charge onl
ページ13に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER as close to the point of cable entry as practical". 13
ページ14に含まれる内容の要旨
ELECTRONIC VIEWFINDER ELECTRONIC VIEWFINDER Set the viewfinder to the position shown in the figure when carrying the camcorder or storing it in the carrying case. Turn the viewfinder to the position shown below when shooting pictures. 1. Turn the viewfinder 2. Turn the eyepiece. You can adjust the position and angle of the viewfinder so you can see through it easily. Cautions: • Do not force the viewfinder to rotate completely around. This will damage the viewfinder
ページ15に含まれる内容の要旨
ELECTRONIC VIEWFINDER 15
ページ16に含まれる内容の要旨
POWER SOURCES POWER SOURCES WHEN USING WITH THE BATTERY (Provided) • To attach, align the mark " " of the battery with that of the camera/recorder so that the battery fits into the groves, and slide the battery downward, as illustrated. • To remove the battery: Push and hold "Battery" release lever, then slide the battery to the upside and remove. WHEN USING WITH THE AC ADAPTER/CHARGER (Provided) 1. Plug the AC adaptor/charger power cord into AC electrical outlet. 2. Conn
ページ17に含まれる内容の要旨
POWER SOURCES • When using the AC adaptor/charger to power the camera/recorder, the battery level indicator may display " ". This indicator is used for battery operation and has no meaning when using the AC adaptor/charger to power the camera/recorder. WHEN USING WITH THE CAR BATTERY (By using optional car battery cord Hitachi VM-CC70A) 1. Connect the small plug of the car battery cord to the "DC IN 9.6V" jack of the camera/recorder. 2. Connect the other end of the car battery cord t
ページ18に含まれる内容の要旨
CHECKING THE BATTERY CHECKING THE BATTERY When the " " indication appears in the viewfinder and flashes while the camera/recorder is being operated with a battery (provided), it indicates that the battery charge is low. Charge it or replace it with a charged battery. NOTE: When the camera/recorder is turned on, the battery level indicator " " is displayed in the viewfinder indicating the condition of camera/recording battery. When the battery is fully charged, " " is displayed. After s
ページ19に含まれる内容の要旨
CHARGING A BATTERY CHARGING A BATTERY 1. Plug the AC adaptor/charger power cord into AC electrical outlet. 2. Attach the battery to the AC adaptor/charger. Align the mark " " on the battery with that of AC adaptor/charger and push the battery flush with the AC adaptor/charger and slide it in the direction of arrow. NOTE: You must remove the DC cord from the AC adaptor/charger to charge the battery. If the DC cord is connected, "CHARGE" light will not light. 3. The "CHARGE" light w
ページ20に含まれる内容の要旨
CHARGING A BATTERY NOTES: 1. The time required for charging the battery is approx. two hours. 2. When fully charged, the battery should supply approx. 90 minutes of operating time (depending on how much you use zoom and pause). 2. Charge the battery after use and store it at normal room temperature. 3. Recharge the battery at least once every six months. The battery is a lead-acid battery. This battery tends to discharge if not used for an extended period of time. If the battery is store
