ページ1に含まれる内容の要旨
PUB.DIM-659
English
Digital Video Camcorder
English
Instruction Manual
Camescope numérique
Français
Manuel d’instruction
Videocámara digital
Manual de Instrucciones
Español
Digital
Mini
Video
Cassette
Please read also the following instruction manual.
Veuillez lire aussi le manual d’instruction suivant.
Lea también el manual de instrucciones siguiente.
• Digital Video Software
NTSC
ページ2に含まれる内容の要旨
Introduction Important Usage Instructions WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Digital Video Camcorder, ZR300/ZR200 systems This device complies with Part 15 of
ページ3に含まれる内容の要旨
Introduction IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word “product” 10. Power Sources — The CA-570 Compact E Power Adapter should be operated only refers to the Canon Digital Video Camcorder from the type of power source indicated ZR300/ZR200 A and all its accessories. on the marking label. If you are not sure of 1. Read Instructions — All the safety and the type of power supply to your home, operating instructions should be read consult your product dealer or loca
ページ4に含まれる内容の要旨
18.Damage Requiring Service — Disconnect Fig. 1 EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE this product from the wall outlet and all power sources including battery, and refer ANTENNA LEAD servicing to qualified service personnel IN WIRE under the following conditions: GROUND a. When the power-supply cord or plug is LAMP ANTENNA DISCHARGE damaged. UNIT (NEC SECTION 810-20) b. If any liquid has been spilled onto, or objects have fallen into, the product. ELECTRIC SER
ページ5に含まれる内容の要旨
Introduction Using this Manual Thank you for purchasing the Canon ZR300/ZR200. Please read this manual carefully before you use the camcorder and retain it for future reference. E Change the display language before you begin ( 74). Symbols and References Used in This Manual : Precautions related to the camcorder operation. : Additional topics that complement the basic operating procedures. : Reference page number. Capital letters are used to refer to buttons on the camcorder or the wireless
ページ6に含まれる内容の要旨
Table of contents Introduction Using this Manual............................................................................................5 Checking Supplied Accessories ......................................................................8 Components Guide..........................................................................................9 Basic Functions Preparations Preparing the Power Supply..........................................................................13 Loading/Unloadin
ページ7に含まれる内容の要旨
Introduction Editing Recording to a VCR or Digital Video Device .................................................77 Recording from Analog Video Devices (VCR, TV or Camcorder) .................79 Recording from Digital Video Devices (DV Dubbing) ....................................80 E Converting Analog Signals into Digital Signals (Analog-Digital Converter) ...82 Audio Dubbing...............................................................................................84 Transferring Video Reco
ページ8に含まれる内容の要旨
Checking Supplied Accessories CA-570 Compact NB-2LH Battery Pack Lithium Button Battery WL-D85 Wireless Power Adapter CR1616 Controller (incl. power cord) Lithium Button Battery Lens Cap and Lens STV-250N Stereo IFC-300PCU USB CR2025 for Wireless Cap Cord Video Cable Cable Controller DIGITAL VIDEO SOLUTION DISK SDC-8M SD Memory WA-28 Wide Card Attachment The serial number of this product can be found at the battery attachment unit of the camcorder. Write down the number and other informatio
ページ9に含まれる内容の要旨
Introduction Components Guide ZR300/ZR200 E REC SEARCH – button ( 28) / CARD MIX button ( 106) / (record review) button ( 28) / (stitch assist) button ( 100) / (rewind) button ( 32) / REC PAUSE button ( 79) / CARD – button ( 102) SLIDE SHOW button ( 103) REC SEARCH + button ( 28) / Speaker ( 34) (fast forward) button ( 32) / LCD screen ( 21) CARD + button ( 102) SET dial ( 37) LCD BACKLIGHT button ( 21) CHARGE indicator ( 13) / WIDESCREEN button ( 66) / Card access indicator ( 92) DATA CODE but
ページ10に含まれる内容の要旨
Dioptric adjustment lever ( 18) Finger rest Viewfinder ( 18) TAPE/CARD switch ( 5) BATT. button ( 13) Using a tape Power switch ( 5) Using a memory card Cassette compartment cover ( 16) PHOTO button ( 92) Cassette compartment ( 16) Strap mount ( 144) OPEN/EJECT switch ( 16) Grip belt ( 18) Zoom lever ( 29) Start/stop button ( 25, 97) 10
ページ11に含まれる内容の要旨
Introduction E Terminal cover AV terminal ( 35) Remote sensor ( 20) DV terminal ( 77) Assist lamp ( 48) USB terminal ( 112, 121) Stereo microphone Tripod socket ( 31) 11
ページ12に含まれる内容の要旨
Wireless Controller WL-D85 START/ STOP PHOTO ZOOM CARD DATE SEARCH REW PLAY FF STOP PAUSE SLOW ZERO SET AUDIO DUB. MEMORY TV SCREEN - WIRELESS CONTROLLER WL D85 Transmitter ZERO SET MEMORY button ( 71) START/STOP button ( 25, 97) PHOTO button ( 92) CARD –/+ buttons ( 102) Zoom buttons ( 29) DATE SEARCH / buttons ( 72) PLAY button ( 32) REW button ( 32) FF button ( 32) –/ button ( 33) STOP button ( 32) PAUSE button ( 33) +/ button ( 33) SLOW button ( 33) x 2 button ( 33) AUDIO DUB. button
ページ13に含まれる内容の要旨
Basic Functions Preparations Basic Functions Preparations Preparing the Power Supply E Attaching the Battery Pack 1. Turn the POWER switch to OFF. 2. Attach the battery pack to the camcorder. • Remove the terminal cover of the battery pack. • Press lightly and slide it in the direction of the arrow until it clicks. Charging the Battery Pack 1. Connect the power cord to the CHARGE indicator adapter. 2. Plug the power cord into a power DC IN terminal outlet. 3. Connect the power adapter to t
ページ14に含まれる内容の要旨
Using a Household Power Source Connect to a household power source to use the camcorder without worrying about the battery power. You can keep the battery pack attached; the battery power will not be consumed. 1. Turn the POWER switch to OFF. 2. Connect the power cord to the power adapter. 3. Plug the power cord into a power outlet. 4. Connect the power adapter to the camcorder’s DC IN terminal. Turn off the camcorder before connecting or disconnecting the power adapter. If the adapter is
ページ15に含まれる内容の要旨
Basic Functions Preparations Charging, Recording and Playback Times Below times are approximate and vary according to the charging, recording or playback conditions. Battery Pack NB-2LH NB-2L BP-2L12 BP-2L14 E Charging Time 130 min. 115 min. 205 min. 235 min. Max. Recording Time Viewfinder 135 min. 115 min. 245 min. 300 min. LCD normal 95 min. 80 min. 170 min. 210 min. bright 85 min. 70 min. 145 min. 185 min. Typical RecordingTime* Viewfinder 75 min. 60 min. 130 min. 160 min. LCD normal 55 min
ページ16に含まれる内容の要旨
Loading/Unloading a Cassette Use only videocassettes marked with the logo. 1. Slide the OPEN/EJECT switch and Tape protection tab open the cassette compartment cover. The cassette compartment opens automatically. 2. Load/unload the cassette. • Load the cassette with the window facing the grip belt. • Unload the cassette by pulling it straight out. 3. Press the mark on the cassette compartment until it clicks. 4. Wait for the cassette compartment to retract automatically and close the
ページ17に含まれる内容の要旨
Basic Functions Preparations Installing the Backup Battery The backup battery (lithium button battery CR1616) allows the camcorder to retain date, time ( 22) and other camcorder settings while the power source is disconnected. E Connect a power source to the camcorder when replacing the backup battery to retain the settings. 1. Open the backup battery cover. 2. Insert the backup battery with the + side facing outward. 3. Close the cover. The backup battery has a life span of about a year. “
ページ18に含まれる内容の要旨
Preparing the Camcorder Adjusting the Viewfinder (Dioptric Adjustment) 1. Turn on the camcorder and keep the LCD panel closed. 2. Pull out the viewfinder. 3. Adjust the dioptric adjustment lever. 4. Push the viewfinder back in. Attaching the Lens Cap 1. Attach the cord to the lens cap. 2. Pass the grip belt through the loop on the cord. Press the buttons on the lens cap when attaching/removing it. Hook the lens cap on the grip belt while you are recording, and place it over the lens when y
ページ19に含まれる内容の要旨
Basic Functions Preparations Mounting the Wide Attachment The WA-28 Wide Attachment gives you a wide perspective for indoor shots or panoramic views (0.6x). The wide attachment is for use at maximum wide-angle. E Screw the wide attachment fully into the lens filter thread. Do not look directly at the sun or other strong light sources through the wide attachment. It could damage your eyesight. If you zoom to telephoto, the picture will not be in focus. The wide attachment may obstruct the r
ページ20に含まれる内容の要旨
Using the Wireless Controller Point it at the camcorder’s remote sensor when you press the buttons. Inserting the Battery The wireless controller operates with a lithium button battery CR2025. 1. Pull out the battery holder. 2. Place the lithium button battery with the + side facing up. 3. Insert the battery holder. The wireless controller may not work properly when the remote sensor is subjected to strong light sources or direct sunlight. If the wireless controller does not work, check if
