ページ1に含まれる内容の要旨
TROPHY CAM™
INSTRUCTION MANUAL
Model#s: 119425C2 / 119426C
Lit# 98-1573/02-12
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
TABLE OF CONTENTS PAGE # Table of Contents 3-4 Important Note 5 Introduction 6 Aboout the Trophy Cam 6 Applications 6 Parts and Controls 6-7 Installing the Batteries and SD Card 8-9 Loading Batteries 8 Using an External Power Source 8-9 Inserting the SD Card 9 Using the TROPHY CAM 10 The OFF, ON and SETUP Modes 10 OFF Mode 10-11 ON Mode 11 SETUP Mode 11 SETUP Mode Shortcut Keys/Functions 12 Using the SETUP Menu to Change Settings 13 Changing Parameter Settings in SETUP Mode 13 How Parameter Sett
ページ4に含まれる内容の要旨
TABLE OF CONTENTS (continued) PAGE # Reviewing Images Directly from the SD Card 26 Reviewing Images by Connecting the Camera to a 26 Computer Downloading the Photos/Videos 27 Troubleshooting/FAQs 28-32 Technical Specifications 33 Warranty 34 FCC Compliance Statement 35 4
ページ5に含まれる内容の要旨
IMPORTANT NOTE Congratulations on your purchase of one of the best trail cameras on the market! Bushnell is very proud of this little unit and we are sure you will be pleased with it as well. We appreciate your business and want to earn your trust. Please refer to the notes below and the instructions in this manual to ensure that you are completely satisfied with this product. If your Bushnell Trophy Cam does not seem to be functioning properly or if you are having photo/video quality i
ページ6に含まれる内容の要旨
INTRODUCTION About the TROPHY CAM The Bushnell Trophy Cam is a digital scouting camera. It can be triggered by any movement of game in a location, detected by a highly sensitive Passive Infra-Red (PIR) motion sensor, and then take high quality pictures (up to 8MP still photos), or video clips. The Trophy Cam consumes very little power (less than 300μA) in a stand- by (surveillance) state. This means it can deliver up to six months stand-by operation time when the device is powered by eight A
ページ7に含まれる内容の要旨
camera to Photo mode (still camera icon), and the UP key can set the camera to Video mode (movie camera icon). The RIGHT key also serves as the manual shutter (“SHOT”) button of the camera and the OK key switches the camera to the Playback (“REPLAY”) mode. These secondary functions are indicated by icons or text above the key as shown in Fig. 2. FRONT VIEW LED IR Flash Motion/ Low Battery Lens Indicator Lock Hole Fig. 1: Connections PIR Sensor TV Out USB Port DC In SD Card Slot INTERIOR VIE
ページ8に含まれる内容の要旨
INSTALLING THE BATTERIES and SD CARD Before you begin learning how to use your Trophy Cam, you will first need to install a set of batteries and insert an SD card. Although that may only take you a minute, there are some important notes about both batteries and SD cards you should be aware of, so please take the time to read the following directions and cautions: Loading Batteries After opening the two latches on the right side of the Trophy Cam, you will see that the Trophy Cam has eight
ページ9に含まれる内容の要旨
source with the power input jack of the Trophy Cam, making sure that the polarity is correct. Note: The power connector is a 4.0x1.7mm coaxial DC power plug with positive “tip” (inside pin) polarity (Radio Shack P/N 274-1532 or equivalent). If both an external power source is connected and batteries are installed, the Trophy Cam will be powered by the external power source. When the batteries become weak, the low-battery indicator LED will glow blue, indicating the batteries should be chang
ページ10に含まれる内容の要旨
especially when a card has been used in other devices (see “Changing Menu Parameter Settings” for details). • To take out the SD card, just gently push in the card (do not try to pull it out without pushing in first). The card is released from the slot and ready to be removed when you hear the click. WARNING Be sure the camera’s power is switched OFF before inserting or removing SD cards or batteries. USING THE TROPHY CAM Once you’ve prepared your Trophy Cam by properly installing batteries
ページ11に含まれる内容の要旨
in the OFF mode the Trophy Cam still consumes power at a very low level. Therefore, it’s a good idea to take the batteries out of the battery compartment if the camera will not be used for a long time. ON Mode Anytime after the batteries and SD card have been inserted, you can switch on the camera. When the power switch is moved to the top position, the camera will enter into the ON (Live) mode. The motion indicator LED (pg. 7, “Front View”) will blink red for about 10 seconds. This interv
ページ12に含まれる内容の要旨
Fig. 3: SETUP Information Screen Image Size (Resolution) SD Card Status Still Photo Mode Battery Level Date:Month-Day-Year Time Stamp 2 Time Field Scan On Hour:Minute:Second # of Photos Taken Remaining Photo Capacity SETUP Mode Shortcut Keys/Functions As mentioned earlier in “Parts & Controls”, four of the keys below the LCD have secondary, “shortcut” functions when the camera is switched to SETUP mode (but the MENU key has not been pressed): • Press the UP key to quickly set the camera to shoo
ページ13に含まれる内容の要旨
USING THE SETUP MENU TO CHANGE SETTINGS The main purpose of the SETUP mode is to allow you to change the settings of the camera’s parameters (12-13 different ones are available) so your Trophy Cam operates exactly the way you want it to. You will do this by entering the SETUP Menu and pressing the keys below the LCD display, which will show you each parameter and its setting. Changing Parameter Settings in SETUP Mode A wide range of options or “parameters” are provided to allow you to set t
ページ14に含まれる内容の要旨
How Parameter Settings Are Displayed Some more detail regarding how the settings for a parameter are indicated on the display: • Only one setting is displayed at a time, starting with the current setting for the parameter when it is first selected (Fig. 4a). To change the setting, use the UP/DOWN keys to display the new setting you want (Fig. 4b), then press OK to “Execute” (make the actual change to this setting). If you want to confirm this setting is now the current one, just press the
ページ15に含まれる内容の要旨
EXAMPLES-Changing the Settings of Some Common Parameters Following this page, you will find tables listing all of the parameters found in the SETUP Menu, along with their possible settings (or range of settings), and a detailed description of what the parameter controls and what the settings do. If you read the previous section detailing how to select parameters and change their settings, you should be able to dive right in, find the parameter(s) you want, and setup the camera to your pref
ページ16に含まれる内容の要旨
FIELD SCAN FEATURE Field Scan is a revolutionary new feature for the Bushnell Trophy Cam, which allows you to monitor your food plots or field edges with time lapse images or video. When set to “On”, the Trophy Cam will take a photo (or record a video clip) automatically at your choice of intervals during a block of time you set up for each day, without requiring a trigger from an active animal. This has the advantage of giving you the ability to monitor the edge of a field that might be 5
ページ17に含まれる内容の要旨
5. After you finish setting the last time setting (Stop minutes), another press of the RIGHT key will take you to the setting for Interval. This lets you control how often a photo or video clip is recorded during the block of time you defined with the Start and Stop settings. Note that for videos, this is independent of the length of each video recording-it’s how often videos are recorded, not how long each one lasts. Your options are 60 minutes, 30 minutes, 15 minutes,5 minutes (this is
ページ18に含まれる内容の要旨
The SETUP Menu-Parameters and Settings List w/Descriptions Parameter Settings Description (Bold=default) Mode Camera or Selects whether still photos or Video video clips are captured when the camera is triggered. Image Size 3M Pixel, 5M Sets resolution for still photos (only affects Pixel, 8M Pixel to 3, 5 or 8 megapixels. Higher still photos) resolution produces better quality photos, but creates larger files that take up more of the SD card capacity (fills up faster). Capture 1 Photo,
ページ19に含まれる内容の要旨
The SETUP Menu-Parameters and Settings List w/Descriptions Parameter Settings Description (Bold=default) Interval 10S (second) Selects the length of time that the default, camera will “wait” until it responds with a 60M to any additional triggers from (minute) to1S the PIR after an animal is first (second) range detected and remains within the of settings sensor’s range. During this user available. set “ignore triggers” interval, the camera will not capture photos/ (60M-1M are set videos.
ページ20に含まれる内容の要旨
The SETUP Menu-Parameters and Settings List w/Descriptions Parameter Settings Description (Bold=default) Format Execute Deletes (erases) all files stored on a card to prepare it for reuse. Always format a card that has been previously used in other devices. Caution! Make sure you have downloaded and backed up any files you want to preserve first! Press OK to execute, press MENU (or select NO then press OK) to exit without formatting. TV Out NTSC, PAL Selects video standard /format fo
