ページ1に含まれる内容の要旨
COLOR CCD CAMERA
INSTRUCTION MANUAL
SDC-311 SERIES
SDC-241 SERIES
SALESNETWORK
·SAMSUNG OPTO-ELECTRONICS AMERICA INC.
·SAMSUNG TECHWIN CO., LTD
40 SEAVIEW DIRVE, SECAUCUS N.J
OPTICS & DIGITAL IMAGING DIV.
07094, U.S.A.
145 -3, SANGDAEWON 1-DONG, JUNGWON-GU,
SUNGNAM, KYUNGKI-DO, KOREA
TEL : (201) 902-0347
462-121
FAX : (201) 902-9342
SAMSUNG CCD CAMERA
TEL : 82 -031-740 - 8121~41
FAX: 82 -031-740 - 8145
www.samsungcctv.com
P/NO.:6806-0231-01C
www.samsungtechwin.com
Printed in Korea
www.samsun
ページ2に含まれる内容の要旨
Thank you for purchasing a SAMSUNG CCD CAMERA. CAUTION RISK OF ELECTRIC SHOCK Before operating the camera, confirm the camera model and proper input power DO NOT OPEN voltage. In order that you can understand this manual thoroughly, we'll introduce our model description. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. SDC-311 Series (410,000 Pixels) REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. •NTSC models
ページ3に含まれる内容の要旨
Features Contents ............................................................... ........ Electronic Iris Automatic Backlight Compensation PRECAUTIONS 6 ........................................... Electronicirisshutterisautomatically GETTING TO KNOW YOUR CAMERA 8 The backlight compensation technology controlledatthespeedof allows the camera to find the best ............................................................... ......... Front 8 picture conditions in any environment 1/ 60 ~1/ 100,000se
ページ4に含まれる内容の要旨
Precautions Do not drop the camera or subject Never keep the camera face to strong Do not install the camera in extreme Do not install or use the camera in an them to physical shocks. light directly. temperature conditions. environment where the humidity is high. Dousethecameraunderconditionswhere Itcancausetheimagequalitytobepoor. temperaturesarewithin-10 ° Cto50° C. Itcancausemalfunctionstooccur. ItcandamagetheCCD. Especiallybecarefulforventilationunder hightemperature. Do not expose the camer
ページ5に含まれる内容の要旨
Getting to Know Your Camera Tripod Mounting Hole Bottom Used to install the camera on an optional Front tripod. The tripod must be equipped with the screw specified as shown below. Focal Length Adjusting Knob. 1/4” -20UNC(20THREAD) Used to adjust Back focal length. L:4.5mm 0.2mm(ISOstandard), Tripod Mounting Bracket Screw Hole. L or0.197” (ASAstandard) Used to fix Tripod mounting bracket on the top of the camera. Auto Iris Lens Connector. Used to connect Auto iris lens plug. You can remove and
ページ6に含まれる内容の要旨
Back AC type DC type Power LED Power LED Video Output Jack Video Output Jack The LED turned on The LED turned on when power is supplied. Used to connect an external Used to connect an external when power is supplied. video monitor in jack. video monitor in jack. V. PHASE Used to adjust vertical DC Level DC Level phase Used to adjust DC IRIS lens level. Used to adjust DC IRIS lens level. Linelock mode from 0~270 (You can adjust DC level when (You can adjust DC level when ESC mode is off.) ESC mo
ページ7に含まれる内容の要旨
Connection 4. Remove the protecting cap, and attach the lens into the camera by turning clockwise. Lens Lens is not supplied with this camera. Purchase a lens suitable 5. Connect the lens plug to the auto iris connector on the rear of the for your environment. This camera accepts auto iris lens, both camera. C- and CS-mount lens. NOTE •Ifthelensisstainedwithfingerprintorsomething,theimag equality mightbepoor. •Itisrecommendedtouseahighqualitylenstoimprovetheim age qualityunderlowillumination. In
ページ8に含まれる内容の要旨
◆ In case of mounting a C-mount lens Installing C/CS - Mount lens Before mounting a lens, please check whether it is a C-mount or 1.Afterremovingtheprotecting 2. TurntheFocallengthadjusting CS-mount lens. cap,loosentheBackfocuslock knobtocounterclockwiseuntil The back focus has set for CS-mount lens at the factory. screwwithscrewdriver. locking. If the mount is changed to the C-mount lens, it may need to be re-adjusted. ◆ In case of mounting a CS-mount lens After removing the protecting cap, at
ページ9に含まれる内容の要旨
Connecting to Monitor Connecting to Power Connect the VIDEO Out jack to the monitor VIDEO In jack. Each model has different power specification, please check the name of the model and power specification before connecting to power source. Please refer to the sticker identifying the model, which is attached on the product, for power specification. CCDCamera Monitor AC outlet •Thewireispolarized.Besureto 220V connectthewirewithwhitelineon itscoveringto ‘ -’ terminaland 100V connecttheotheroneto ‘+
ページ10に含まれる内容の要旨
Menu Setup ④ Whitebalancecontrolmode 1)ATW(AutoTracingWhitebalance):Thecameraautomatically Use the six Setup Menu buttons on the rear of the camera. controlsthewhitebalanceinanyenvironment. Menu Setup Switch 2)AWC(AutoWhitebalanceControl):TheWhitebalanceisauto matically ① ElectonicShutterspeedControl : OFF adjustedinaspecificenvironment. ESC FL BLC ATW VIDEO INT ② Flickerless : OFF ③ BacklightCompensation : OFF NOTE •PleaceselectESCOFFthatchromamavbechanceperiodicallv ④ AutoWhiteBalance : ATW be
ページ11に含まれる内容の要旨
Troubleshooting Problem Solution If you have trouble operating your camera, refer to the following. If the guidelines do not enable you to solve the problem, contact The color of the picture is not an authorized technician. • Check that you have properly set White Balance matched. Control Mode. Problem Solution • Adjust the contrast feature of the monitor. The contrast on the screen • Check that the power cord and line connection is too weak. • If the camera is exposed under too strong light,
ページ12に含まれる内容の要旨
Specifications SDC-311 Series SDC-241 Series Item SDC-311ND SDC-311NA SDC-311PD SDC-311PA SDC-311PH Item SDC-241ND SDC-241NA SDC-241PD SDC-241PA SDC-241PH AC24V AC24V~ AC230V~ AC24V AC24V~ AC230V~ PowerSource DC12V DC12V PowerSource DC12V DC12V 60Hz 50Hz 50Hz 60Hz 50Hz 50Hz PowerConsumption 4.5W 6.5W 4.5W 6.5W 6.5W PowerConsumption 4.0W 6.0W 4.0W 6.0W 6.0W InputCurrent 350mA 240mA 350mA 240mA 32mA InputCurrent 320mA 240mA 320mA 240mA 28mA INT/Linelock INT/Linelock SYNC.System INTOnly INTOnly INT
