ページ1に含まれる内容の要旨
DCR-TRV130E
RMT-814
AEP Model
SERVICE MANUAL SERVICE MANUAL SERVICE MANUAL
UK Model
Level 1
Ver 1.0 2001. 01
M2000 MECHANISM
SPECIFICATIONS
DIGITAL VIDEO CAMERA RECORDER
ページ2に含まれる内容の要旨
Checking supplied accessories. Make sure that the following accessories are supplied with your camcorder. Wireless Remote Commander (1) AC-L10A/L10B/L10C NP-F330 Size AA (R6) battery for RMT-814 AC power adaptor (1) battery pack (1) Remote Commander (2) 1-475-141-61 (A-7094-141-A) (not supplied) 0 1-475-599-11 Power cord (1) (AEP only) 0 1-769-608-11 Power cord (1) (UK only) 0 1-783-374-11 A/V connecting cable (1.5m) (1) Shoulder strap (1) Lens cap (1) 21-pin adaptor (1) 1-765-080-11 3-987-015-0
ページ3に含まれる内容の要旨
TABLE OF CONTENTS SERVICE NOTE Superimposing a title ······························································ 36 Making your own titles ··························································· 36 1. POWER SUPPLY DURING REPAIRS ····························· 4 Using the built-in light ···························································· 37 2. TO TAKE OUT A CASSETTE WHEN NOT EJECT Advanced Playback Operations (FORCE EJECT) ···························································
ページ4に含まれる内容の要旨
SERVICE NOTE 1. POWER SUPPLY DURING REPAIRS In this unit, about 10 seconds after power is supplied (8.4V) to the battery terminal using the service power code (J-6082-223-A), the power is shut off so that the unit cannot operate. These following two methods are available to prevent this. Take note of which to use during repairs. Method 1. Use the DC IN terminal. (Use the AC power adaptor.) Method 2. Connect the adjustment remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the HOLD s
ページ5に含まれる内容の要旨
SELF-DIAGNOSIS FUNCTION 1. Self-diagnosis Function 2. Self-diagnosis Display When problems occur while the unit is operating, the self-diagnosis When problems occur while the unit is operating, the counter of the function starts working, and displays on the viewfinder or LCD or viewfinder or LCD or Display window shows a 4-digit display Display window what to do. This function consists of two display; consisting of an alphabet and numbers, which blinks at 3.2 Hz. This self-diagnosis display and
ページ6に含まれる内容の要旨
4. Self-diagnosis Code Table Self-diagnosis Code Block Detailed Symptom/State Correction Function Code C 04 00 Non-standard battery is used. Use the InfoLITHIUM battery. C 21 00 Condensation. Remove the cassette, and insert it again after one hour. C 22 00 Video head is dirty. Clean with the optional cleaning cassette. LOAD direction. Loading does not C 31 10 Load the tape again, and perform operations from the beginning. complete within specified time UNLOAD direction. Loading does not C 31 11
ページ7に含まれる内容の要旨
Self-diagnosis Code Block Detailed Symptom/State Correction Function Code Inspect the lens block focus reset sensor (Pin qs of CN1551 of Difficult to adjust focus VC-256 board) when focusing is performed when the control dial E 61 00 (Cannot initialize focus.) is rotated in the focus manual mode and the focus motor drive circuit (IC1551 of VC-256 board) when the focusing is not performed. Inspect the lens block zoom reset sensor (Pin qf of CN1551 of Zoom operations fault VC-256 board) when zoomi
ページ8に含まれる内容の要旨
DCR-TRV130E 1. MAIN PARTS Note: • Follow the disassembly procedure in the numerical order given. The components identified by mark 0 or • Items marked “*” are not stocked since they are seldom required for routine service. dotted line with mark 0 are critical for safety. Replace only with part number specified. Some delay should be anticipated when ordering these items. • The parts numbers of such as a cabinet are also appeared in this section. Refer to the parts number mentioned below the name
ページ9に含まれる内容の要旨
2. DISASSEMBLY The following flow chart shows the disassembly procedure. 2-1. Video light 2-2. LCD section (PD-131 board) 2-3. Front panel section (MI-041 board) 2-4. Cabinet (L) section 2-5. Cabinet (R) section, Control switch block (CF-1000) 2-6. EVF section (VF-129 board) 2-11. Hinge section 2-7, Battery panel section (Battery terminal board) 2-8, Lens section 2-9. VC-256 board 2-10. Mechanism deck — 9 — DCR-TRV130E
ページ10に含まれる内容の要旨
NOTE: Follow the disassembly procedure in the numerical order given. 2-1. VIDEO LIGHT 3 Remove in the direction of the arrow A. A 1 Push in the dent 4 Halogen lamp inside hole with wire tip. 2 Video light 2-2. LCD SECTION (PD-131 BOARD) 3 Five claws 4 P cabinet C 2 MI screw A (M2 · 4) (H) 5 Two tapping screws (B2 · 7) 9 PD-131 board, Panel frame 8 Back light Cold cathode fluorescent tube 7 Liquid crystal indicator module A 6 P cabinet M assembly 1
ページ11に含まれる内容の要旨
MI-041 Board 2-3. FRONT PANEL SECTION (MI-041 BOARD) 1 Open the jack cover 3 MI screw (M2 · 4) (H) 2 Two MI screws (M2 · 4) (H) 4 Two MI screws (M2 · 4) (H) 5 Claw 6 FP-263 flexible board (24P) 7 Front panel section 1 Two tapping screws (B2 · 5) 3 Two tapping screws (B2 · 5) 5 Microphone (Rch) 3 Microphone retainer (rear) 4 MI-041 board 6 Microphone (Lch) 2 Four claws 2 Microphone (Lch) (2P) 4 Microphone retainer (front) 1 Microphone (Rch) (2P) 2-4. C
ページ12に含まれる内容の要旨
2-5. CABINET (R) SECTION, CONTROL SWITCH BLOCK (CF-1000) 1 MI screw (M2 · 4) (H) 4 Claw 2 MI screw (M2 · 4) (H) 7 Cabinet (R) section 6 FFC-295 flexible flat cable (24P) 5 Harness 3 Three MI screws (PD-110) (20P) (M2 · 4) (H) 7 Remove the control switch block (CF-1000) in the direction of the arrow AB. A B 8 Control switch block 6 Tape (A) (CF-1000) Tape (A) 3 Electro luminous element (4P) 5 Five tapping 2 FP-260 flexible board (16P) screw
ページ13に含まれる内容の要旨
2-6. EVF SECTION (VF-129 BOARD) 4 3 EVF section 3 VF base B PRECAUTION DURING INSTALLATION 2 Three tapping Tape (A) 1 FFC-289 flexible screws (B2 · 5) flat cable (4P) 1 Tape (A) FFC-289 flexible 3 Finder (S) assembly 2 Two loose flat cable Rotate it in the direction of stopper screws the arrow B and remove it (M2 · 3) in the direction of the arrow C. C B A 4 1 F lock screw (T) 2 Slide the button in the direction of the arrow A. 8 CRT assembly, VF
ページ14に含まれる内容の要旨
2-7. BATTERY PANEL SECTION (BATTERY TERMINAL BOARD) 1 Tripod screw 5 Claw 4 MI screw (M2 · 4) (H) 2 Strap sheet metal (lower) 7 Control switch block (SS-1000) (5P) 1 MI screw (M2 · 4) (H) 3 MI screw (M2 · 4) (H) 3 Battery terminal board 2 Battery terminal board (7P) 6 Battery panel section 2-8. LENS SECTION 2 Flexible board (from lens block)(24P) Two tapping 1 2 Lens frame screws (B2 · 5) 1 FP-259 flexible board (14P) 5 Claw 3 Lens section 3 Screw
ページ15に含まれる内容の要旨
2-9. VC-256 BOARD 7 Control switch block (FK-1000) (12P) 5 FP-258 flexible board 4 Jack cushion 8 VC-256 board D C B A 6 Screw (M2 · 3), 3 Two screws lock ace, p2 (M2 · 3), lock ace, p2 D C B A 1 Two screws (M2 · 3), lock ace, p2 2 MD frame B 2-10. MECHANISM DECK REMOVING THE MECHANISM DECK 4 Control switch block 6 Mechanism deck 1 Screw (FK-1000) (M2 · 3), lock ace, p2 1 Three screws (M1.7 · 2.5), p 3 2 absorbing sheet 3 Three 5 MD sheet
ページ16に含まれる内容の要旨
2-11. HINGE SECTION 3 Electro luminous element (4P) 5 Hinge blind, Push switch REMOVING THE HINGE ASSEMBLY 7 Control switch block (PR-10000) 5 Harness (PD-110) 3 Hinge cover M 4 Harness clamp 1 FP-260 flexible board (16P) 2 Push switch (2P) 4 Three tapping screws (B2 · 5) 1 Four claws 6 Screw (M1.7 · 2.5), p A 1 Four tapping 2 Hinge screws (B2 · 5) cover C 8 Hinge assembly 2 A — 16 —
ページ17に含まれる内容の要旨
MI-041 3. REPAIR PARTS LIST 3-1. EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • The mechanical parts with no reference number The components identified by mark 0 or have some differences from the original one. in the exploded views are not supplied. dotted line with mark 0 are critical for safety. • Items marked “*” are not stocked since they Replace only with part number specified. are seldom required for routine service. Some delay should be anticipated when ordering the
ページ18に含まれる内容の要旨
3-1-2. CABINET (L) SECTION 62 58 not supplied 58 G I 68 58 59 63 58 53 64 BT901 57 60 61 J A not B supplied C D E 56 EVF section Mechanism deck H 71 (See page 19) 54 I G 65 J F 53 66 66 53 H K 70 F A B 53 E D C 67 51 69 52 55 53 53 Lens section (See page 20) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 51 1-680-203-11 FP-263 FLEXIBLE BOARD 62 1-476-424-41 SWITCH BLOCK, CONTROL (SS-1000) * 52 3-065-428-01 FRAME B (10), MD 63 X-3951-196-1 PANEL (12) ASSY, BATTERY 5
ページ19に含まれる内容の要旨
3-1-3. EVF SECTION not 114 supplied 111 V901 112 113 103 109 107 108 110 103 106 105 102 104 103 101 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 101 3-061-794-01 SCREW, LOOSE STOPPER 109 X-3951-202-1 CABINET UPPER B (12) ASSY, EVF 102 3-065-481-01 BASE B (12), VF 110 3-975-898-01 SCREW (T), F LOCK 103 3-948-339-81 TAPPING 111 X-3949-329-1 FINDER (S) ASSY 104 X-3950-230-1 HINGE ASSY, VF 112 3-941-343-21 TAPE (A) 105 3-065-480-01 CABINET LOWER B (12), EVF 113 3-709
ページ20に含まれる内容の要旨
3-1-4. LENS SECTION 163 161 160 159 162 IC191 153 158 155 M906 156 157 154 152 155 not supplied 154 M905 152 153 151 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 151 not supplied DEVICE, LENS LSV-630A 159 not supplied ADAPTOR (FK), CCD FITTING 152 not supplied IRIS FLEXIBLE ASSY 630 160 not supplied FILTER BLOCK, OPTICAL 153 3-713-791-41 SCREW, TAPPING (M1.7X5), P2 161 not supplied RUBBER (F), SEAL 154 3-713-791-51 SCREW, TAPPING (M1.7X3.5), P2 162 not supplied CD
