ページ1に含まれる内容の要旨
GB
2-887-135-11(1)
Operating Guide
DCR-SR30E/SR40E/SR50E/
SR60E/SR70E/SR80E
Also refer to “Handycam Handbook” (PDF)
Additional information on this product and
answers to frequently asked questions can be By referring to “Handycam Handbook” (PDF)
found at our Customer Support Website.
contained in the supplied CD-ROM, you can find
more detailed information on how to use the
camcorder.
Printed on 100% recycled paper using
VOC (Volatile Organic Compound)-free
vegetable oil based ink.
© 2006 S
ページ2に含まれる内容の要旨
2
ページ3に含まれる内容の要旨
Read this first This product has been tested and found compliant Before operating the unit, please read this with the limits set out in the EMC Directive for manual thoroughly, and retain it for future using connection cables shorter than 3 meters. (9.8 reference. feet) Disposal of Old Electrical & WARNING Electronic Equipment To reduce fire or shock hazard, do not (Applicable in the European expose the unit to rain or moisture. Union and other European countries with separate CAUTION
ページ4に含まれる内容の要旨
Notes on use � The camcorder is not dust proofed, drip proofed Note on operational temperatures or waterproofed. See “Precautions” (p.29). � When the temperature of the camcorder becomes � To prevent the hard disk from being broken or extremely high or extremely low, you may not recorded images from being lost, do not remove record or playback the camcorder to provide the battery pack or AC Adaptor from the protection to the camcorder. In case of this, a camcorder when either of the resp
ページ5に含まれる内容の要旨
Table of Contents Read this first ............................................................................................3 Notes on use .............................................................................................4 Getting Started Step 1: Checking supplied items...............................................................6 Step 2: Charging the battery pack.............................................................8 Step 3: Turning the power on and setting the date and ti
ページ6に含まれる内容の要旨
Step 1: Checking supplied items Make sure that you have following items Wireless Remote Commander (1) supplied with your camcorder. (DCR-SR50E/SR60E/SR70E/SR80E) The number in the parentheses indicates the number of that item supplied. AC Adaptor (1) (p.8) A button-type lithium battery is already installed. Rechargeable battery pack NP-FP50 (1) (p.9) Mains lead (1) (p.8) Lens Cap (1) (p.10) (DCR-SR30E/SR40E) Handycam Station (1) (p.8) To attach the lens cap A/V connecting cable (1) (p.18) Threa
ページ7に含まれる内容の要旨
Getting Started On the Remote Commander (DCR-SR50E/SR60E/SR70E/ SR80E) Using the Remote Commander for the first time Remove the insulation sheet before using the Remote Commander. Insulation sheet To change the battery of the Remote Commander 1 While pressing on the tab, inset your fingernail into the slit to pull out the battery case. 2 Place a new battery with the + side facing up. 3 Insert the battery case back into the Remote Commander until it clicks. Tab WARNING Battery may explode
ページ8に含まれる内容の要旨
Step 2: Charging the battery pack 2 1 POWER switch 5 5 Battery pack CHG lamp 3 DC IN jack DC plug Mains lead To the AC Adaptor 4 wall socket You can charge the battery after attaching the “InfoLITHIUM” battery pack (P series) to 5 Set the camcorder onto the your camcorder. Handycam Station securely. The CHG (charge) lamp lights up and 1 Slide the battery pack in the charging starts. The CHG (charge) lamp direction of the arrow until it clicks. turns off when the battery pack is fully c
ページ9に含まれる内容の要旨
Getting Started 4 * Typical recording time shows the time when you To charge the battery pack using only repeat recording start/stop, turning the power on/ the AC Adaptor off and zooming. Slide the POWER switch up to OFF (CHG), then connect the AC Adaptor directly to the On the battery pack DC IN jack on the camcorder. � Before changing the battery pack, slide the POWER switch to OFF (CHG). POWER switch � The power will not be supplied from the battery as long as the AC Adaptor is connect
ページ10に含まれる内容の要旨
Step 3: Turning the power on and setting the date and time 1 2 When using the camcorder for Touch the button on the the first time, the [CLOCK SET] screen appears on the LCD LCD screen. screen. CLOCK SET 3&4 AREA1 GMT +0.0 Lisbon , London SUMMERTIME OFF DATE 2006 Y 1 M 1 D 0 00 OK 1 Remove the lens cap by pressing 4 Set [SUMMERTIME], [Y] (year), [M] both tabs on the sides of the cap. (month), [D] (day), hour and Pull the lens cap string down until minute. stopped by the grip belt (DCR-
ページ11に含まれる内容の要旨
Getting Started Step 4: Making setting adjustments before recording 2 180 degrees (max.) 2 1 1 90 degrees to the camcorder 2 90 degrees 3 (max.) 16:9 (wide) 4:3 1 Open the LCD screen 90 degrees 4 Fasten the grip belt and hold your to the camcorder (1), then rotate camcorder correctly. it to the best angle to record or play (2). 2 Slide the POWER switch in the direction of the arrow repeatedly until the respective lamp lights up. (Movie):To record movies (Still):To record still images �
ページ12に含まれる内容の要旨
Recording Lens cover Opens in accordance with the setting of the POWER switch (DCR-SR50E/ PHOTO SR60E/SR70E/SR80E). Shutter Beep click 60min 1.0M FINE 123 P-MENU Flashing b Lights up START/STOP B 1 START/STOP A 60min REC 00:01:00 P-MENU START/ STOP [STBY] b [REC] 1 Slide the POWER switch in the direction of the arrow repeatedly until the respective lamp lights up. Press the green button only when the POWER switch is in the OFF (CHG) position. 2 Start recording. Movies Still Images Press START
ページ13に含まれる内容の要旨
Recording/Playback Playback 1 Slide the POWER switch repeatedly to light up the (PLAY/EDIT) lamp. The VISUAL INDEX screen appears on the LCD screen. Searching for the desired images by date Recording 60min 60min DATE EDIT date 21 12 2006 12:34:01 Previous The last recorded/played back 6 images movie is marked with i. Also, Next 6 when you touch i, you can play images back the movie from the point you P-MENU have stopped previously. (Movie) tab (Still) tab (Playlist) tab 2 Start playb
ページ14に含まれる内容の要旨
Parts and functions used for the camcorder Handycam Station 7 Recording lamp Recording (DCR-SR50E/SR60E/SR70E/SR80E) 1 NIGHTSHOT PLUS switch The recording lamp lights up red during recording. The lamp flashes when the To record in dark places, set the remaining capacity for the battery or the hard NIGHTSHOT PLUS switch to ON. ( and disk of the camcorder is running low. [“NIGHTSHOT PLUS”] appear.) 8 Tripod receptacle (Bottom surface) 2 Power zoom lever To use a tripod, attach the tripod (o
ページ15に含まれる内容の要旨
Recording/Playback qs Shoulder belt hook qa Speaker To attach the shoulder belt, attach the Sound comes out from the speaker while shoulder belt (optional) with your camcorder playing back. to the shoulder belt hook. qh EASY button qd BACK LIGHT button Refer to the instructions on EASY button in To adjust the exposure for backlit subjects, “Recording”. press BACK LIGHT to display .. To cancel the back light function, press BACK LIGHT Connecting to other devices again. qj qk ql ....... Open t
ページ16に含まれる内容の要旨
Indicators displayed during recording/playback Recording movies Recording still images 60min REC 00:01:00 60min 112 [60min] P-MENU P-MENU 1 Remaining battery (approx.) 8 Image size (DCR-SR50E/SR60E/ SR70E/SR80E) 2 Recording mode (HQ / SP / LP) 9 Quality ([FINE] / [STD]) 3 Recording status ([STBY] (standby) / [REC] (recording)) q; Number of recordable still images 4 Counter (hour: minute: second) 5 Remaining recordable time of movies 6 Review button 7 Personal Menu button Viewing movies Viewing
ページ17に含まれる内容の要旨
Recording/Playback Center Indicators on the LCD screen Indicator Meaning When you can change the setup items, or NightShot plus during recording or playback, following Super NightShot plus indicators are displayed. Color Slow Shutter Upper left Upper center Upper right PictBridge connecting 60min STBY 00:01:00 [60min] E Warning Bottom P-MENU Indicator Meaning Bottom Center Picture effect Digital effect Upper left 9 Manual focus Indicator Meaning PROGRAM AE Self-timer recording Continuous phot
ページ18に含まれる内容の要旨
Deleting images Playing the image on a TV Connect your camcorder to the input jack of TV or VCR using A/V connecting cable 1 1 Select the (Movie) tab or the (supplied) or A/V connecting cable with S (Still) tab on the VISUAL INDEX VIDEO 2 (optional). For details, see “Handycam Handbook” (PDF). screen. A/V jack 2 Touch [EDIT] t [DELETE], then select the image to be deleted. The selected image is marked with . 3Touch t [YES]. To delete all movies or still images at S VIDEO once Touch [
ページ19に含まれる内容の要旨
Recording/Playback Performing with a computer In the supplied CD-ROM, the following � The model name of your Handycam is printed on its bottom surface. items are contained: 6 Click [Exit] t [Exit], then remove the CD- – “ImageMixer for HDD Camcorder” ROM from the disc drive of your computer. (Software) Software to help you view/edit/create x For Macintosh user DVD on a computer connected to the 1 Turn on the computer. camcorder. 2 Place the CD-ROM (supplied) on the disc – “Handycam Handbook
ページ20に含まれる内容の要旨
CPU : Intel Pentium III 800 MHz or faster (Pentium 4 1.7 GHz or faster 1 Confirm that your camcorder is not connected to the computer. recommended), or the equivalent CPU 2 Turn on the computer. Application : DirectX 9.0c or later (This � Log on as Administrators for installation. product is based on DirectX technology. � Close all the applications running on the It is necessary to have DirectX installed.) computer before installing the software. Sound system : 16 bit stereo sound card 3
