ページ1に含まれる内容の要旨
Please read this instruction manual carefully before operating the Compact Disc Player.
WARNING
To prevent fire or shock hazard, do not expose the Compact Disc Player to rain or moisture.
IMPORTANT
Since the CD circuitry may cause interference to other radio tuners nearby, switch the unit off
when not in use or move it away from the affected radio tuner.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two
conditions: (1) This device may not cause harmful
ページ2に含まれる内容の要旨
AC ADAPTOR LOCATION OF CONTROLS POWER SOURCES NORMAL BATTERIES / AC ADAPTER Battery Power Operation Average Playing Time 1. Open the battery compartment cover (Continuous Play) and insert two "AA" alkaline batter- Battery Type Normal Play Anti-Skip 7 Mode Play Mode ies inside the battery compartment. Follow the polarity as indicated in the 18 Alkaline "AA" Approx. 9 hrs. Approx. 8 hrs. battery compartment. 9 2 Ni-CAD 2. Close the battery compartment Rechargeable 3 cover. (min
ページ3に含まれる内容の要旨
AC ADAPTOR CHARGING AND USE OF RECHARGEABLE BATTERIES 8. If the operating time decreases drastically even when the rechargeable nickel- cadmium batteries are properly recharged, purchase a new set of rechargeable nickel-cadmium batteries. Rechargeable Battery Operation 9. When charging for the first time or after a long time, playing time may be reduced. This unit can fully recharge specified rechargeable batteries, in approximately 15 In this case, charge and discharge the batteries several ti
ページ4に含まれる内容の要旨
CLEANING DISCS LCD DISPLAY INFORMATION • Finger prints should be carefully wiped from the surface of disc with a soft cloth. Unlike When power is applied to the unit conventional records, compact discs have no grooves to collect dust and microscopic • If disc is in, auto adjustment is started. During adjustment, debris, so gently wiping them with a soft cloth display shows - -. should remove most particles. Wipe in a straight motion from the center to the edge. • If no disc, then disc is display
ページ5に含まれる内容の要旨
REPEAT/PLAY MODES INTRO PLAY Every time the MODE button is pressed, the corresponding mode appears in the 1. Press MODE button three times, then INT is displayed. display window. 2. Press PLAY / PAUSE button, and starts INTRO play from track no. 01. 3. Select INTRO mode during play, INT will flash. MODE MODE MODE MODE • Press PLAY/PAUSE button, INT stops flashing and REPEAT REPEAT INTRO play from track no. 01. NORMAL INTRO 1 ALL • Press >>I to hear the INTRO to the next track. • Press I<<, to he
ページ6に含まれる内容の要旨
RANDOM PLAY MAINTENANCE Enables all the tracks on a disc to be played in a Random (Shuffle) sequence. Cleaning the Case Wipe with a soft cloth. If the case is very dirty, dampen the cloth with a weak 1. Press MODE button four times, then RND is displayed. solution of neutral detergent and water, and then wipe clean. 2. Press PLAY/PAUSE button, then the track No. is selected Cleaning the Lens at random and starts play. A dirty lens will cause sound skipping and, if the lens is very dirty, the CD
ページ7に含まれる内容の要旨
USING ANTI-SHOCK AND SKIP FREE PROTECTION FEATURE PRODUCT SPECIFICATIONS PICK UP Note the " " indicator appears on display as being empty when the player is first activated. It immediately begins to store sound data in the memory bank, the System Compact disc digital audio system indicator appears to be " " when the data buffer is full. Laser diode Material : GaAlAs Properties Wavelength: λ = 780nm When the laser loses tracking due to mechanical shock, the data stream into the memory is interru
