ページ1に含まれる内容の要旨
3-864-534-11(1)
CD Radio
Cassette-Corder
EN
EN
Operating Instructions page 2
ES
ES
Manual de instrucciones página 2
CFD-S45L
CFD-S47
CFD-S47L
1998 by Sony Corporation
ページ2に含まれる内容の要旨
About this manual Warning The instructions in this manual are for the To prevent fire or shock hazard, do CFD-S45L, CFD-S47 and CFD-S47L. Before not expose the player to rain or you start reading, check your model number. moisture. The CFD-S47L is the model used for illustration purpose. To avoid electrical shock, do not open Note the cabinet. Refer servicing to The name of the switch to turn on/off this qualified personnel only. player is indicated as below: “OPERATE”: European countries (exclu
ページ3に含まれる内容の要旨
Basic Operations Table of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player The Timer 12 Using the display 21 Setting the clock EN 13 Locating a specific point in a 22 Waking up to music track 24 Falling asleep to music 14 Playing tracks repeatedly (Repeat Play) Setting Up 15 Playing tracks in random order 25 Choosing the power sources (Shuffle Play) 27 Selecting the audio emphasis 16 Creating your own program (Sound Mode/MEGA
ページ4に含まれる内容の要旨
+ V T O E L S – E R P D N Basic Operations Playing a CD 21 Connect the supplied AC power cord (see page 25). 1 Press 6 CD OPEN/CLOSE CD OPEN/ CLOSE (direct power-on) and place the CD on the CD tray. With the label side up Display 2 Press ^. The CD tray closes and the player TUNE TUNE plays all the tracks once. – + Track number Playing time EN 4 Basic Operations A B – T V E O S L E R + P
ページ5に含まれる内容の要旨
Basic Operations Use these buttons for additional operations = ^ + p 6 CD OPEN/CLOSE OPERATE (or POWER) Tip To Press Next time you want to adjust the volume VOL +, – listen to a CD, just press ^. The player turns on stop playback p automatically and starts playing the CD. pause playback ^ (P on the remote, CFD-S47/S47L only) Press the button again to resume play after pause. go to the next track + go back to the previous track = remove the CD 6 CD OPEN/CLOSE turn on/off the player OPERATE (or PO
ページ6に含まれる内容の要旨
+ + V V T T O O E E L L S S – – E E R R P P D D N N Listening to the radio 2 12 Connect the supplied AC power cord (see page 25). Display 1 Press BAND until the band you want appears in the display (direct power-on). TUNE TUNE – + Indicates an FM stereo 2 Hold down TUNE +/+ or broadcast TUNE –/= (TUNE + or – on the remote, CFD-S47/S47L only) TUNE TUNE – + until the frequency digits begin to change in the display. The player automatically scans the radio frequencies and stops when it finds a clea
ページ7に含まれる内容の要旨
Basic Operations Use these buttons for additional operations MONO/ST ISS PLAY MODE VOL + VOL – OPERATE (or POWER) Tips To Press • If the FM broadcast is adjust the volume VOL +, – noisy, press MONO/ST ISS•PLAY MODE until turn on/off the radio OPERATE (or POWER, “Mono” appears in the see page 2) display and the radio will play in monaural. • Next time you want to To improve broadcast reception listen to the radio, just Reorient the antenna for FM. Reorient the player itself press BAND. The playe
ページ8に含まれる内容の要旨
Playing a tape 2 1 Connect the supplied AC power cord (see page 25). 1 Press p6 to open the tape STOP/EJECT With the side you want compartment and insert a to play facing upward recorded tape. Use TYPE I (normal) tape only. Close the compartment. Display 2 Press (. PLAY The player turns on (direct power-on) and starts playing. EN 8 Basic Operations
ページ9に含まれる内容の要旨
Basic Operations Use these buttons for additional operations 0 ) p6 P VOL + VOL – OPERATE (or POWER) Tip To Press Next time you want to listen to a tape, just adjust the volume VOL +, – press (. The player stop playback p6 turns on automatically and starts playing the f ast-forward or rewind the tape ) or 0 tape. pause playback P Press the button again to resume play after pause. e ject the cassette p6 turn on/off the player OPERATE (or POWER, see page 2) EN Basic Operations 9
ページ10に含まれる内容の要旨
+ + V V T T O O E E L L S S – – E E R R P P D D N N Recording on a tape 31 Connect the supplied AC power cord (see page 25). With the side you want to 1 Press p6 to open the tape STOP/EJECT record on facing upward compartment and insert a blank tape. Use TYPE I (normal) tape only. 2 Select the program source you want to record. Display TUNE TUNE To record from the CD player, – + insert a CD (see page 4) and press p on the CD section. To record from the radio, tune in the station you want (see pa
ページ11に含まれる内容の要旨
Basic Operations 3 Press r to start recording REC (( is depressed automatically). Use these buttons for additional operations FUNCTION MONO/ST ISS PLAY MODE P p6 OPERATE (or POWER) Tips To Press • Adjusting the volume or stop recording p6 the audio emphasis (see page 27) will not affect pause recording P the recording level. Press the button again to • If the AM or MW/LW resume recording. program makes a whistling sound after turn on/off the player OPERATE (or POWER, see you've pressed r in step
ページ12に含まれる内容の要旨
The CD Player Using the display You can check information about the CD using the display. DISPLAY ENTER MEM Checking the total track number and playing time Check the display in stop mode. If the CD has more than 12 tracks, “OVER 12” appears in the display. Total playing time Total track number Music calendar Checking the remaining time Press DISPLAY•ENTER MEM while playing a CD. The track numbers in the music calendar disappear after they are played. To display Press DISPLAY•ENTER MEM the curre
ページ13に含まれる内容の要旨
The CD Player Locating a specific point in a track + You can quickly find a specific point in a track while playing a CD. = You can also locate any track using the number buttons on the remote (CFD-S47/S47L only). To locate Press a point while listening to + (forward) or = the sound (backward) while playing and hold down until you find the point a point while observing + (forward) or = the display (backward) in pause and hold down until you find the point Note a specific track directly the numbe
ページ14に含まれる内容の要旨
Playing tracks repeatedly = (Repeat Play) ^ + p You can play tracks repeatedly in normal, shuffle or program play modes (see page 16). MONO/ST ISS PLAY MODE On the remote 1 Press p. (CFD-S47/S47L only) “Cd” appears in the display. 1 Press p. 2 Press MODE until 2 Proceed as follows. the repeat mode you want appears in the To repeat Do this display. a single track 1 Press MONO/ST ISS• 3 Do either of the PLAY MODE until “REP following to start 1” appears. repeat play: 2 Press = or + to select •When
ページ15に含まれる内容の要旨
The CD Player Playing tracks in random order (Shuffle Play) ^ p You can play tracks in random order. MONO/ST ISS PLAY MODE On the remote 1 Press p. (CFD-S47/S47L only) “Cd” appears in the display. 1 Press p. 2 Press MODE 2 Press MONO/ST ISS•PLAY MODE until “SHUF” repeatedly until appears in the display. “SHUF” appears in the display. 3 Press ^ to start shuffle play. 3 Press (. To cancel Shuffle Play Press MONO/ST ISS•PLAY MODE until “SHUF” disappears from the display. EN The CD Player 15
ページ16に含まれる内容の要旨
Creating your = own program ^ (Program Play) + p You can arrange the playing order of up DISPLAY to 20 tracks on a CD. ENTER MEM MONO/ST ISS PLAY MODE On the remote 1 Press p. (CFD-S47/S47L only) “Cd” appears in the display. 1 Press p. 2 Press MODE until 2 Press MONO/ST ISS•PLAY MODE until “PGM” “PGM” appears in appears in the display. the display. 3 Press the number 3 Press the = or + then press DISPLAY• buttons for the tracks ENTER MEM for the tracks you want to program you want to program in
ページ17に含まれる内容の要旨
The CD Player Tips To cancel Program Play • You can play the same Press MONO/ST ISS•PLAY MODE until “PGM” program again, since disappears from the display. the program is saved until you open the CD tray. To check the order of tracks before play • You can record your Press DISPLAY•ENTER MEM. own program. After you’ve created the Every time you press the button, the track number program, insert a blank appears in the programed order. tape and press r to start recording. To change the current prog
ページ18に含まれる内容の要旨
Enjoying sound LOOP effects (LOOP/FLASH) FLASH You can repeat part of a CD (LOOP) and can “flash” the CD sound (FLASH) during playback. 1 Play a CD. 2 Press and hold LOOP or FLASH at the point you want to start the function. To Press and hold repeat a selected part of a CD LOOP “flash” the CD sound FLASH To cancel the LOOP or FLASH function Release the button. The player returns to normal play. EN 18 The CD Player
ページ19に含まれる内容の要旨
The Radio The Radio Presetting radio PRESET – stations BAND PRESET + You can store radio stations into the player’s memory. You can preset up to DISPLAY 30 radio stations (CFD-S45L/S47L) or 20 ENTER MEM radio stations (CFD-S47), 10 for each band in any order. On the remote 1 Press BAND until the band you want appears in (CFD-S47/S47L only) the display. 1 Press BAND to select 2 Set the frequency to the station you want. the band. 2 Set the frequency to 3 Hold down DISPLAY•ENTER MEM for 2 seconds
ページ20に含まれる内容の要旨
Playing preset PRESET – radio stations BAND PRESET + Once you've preset the stations, use the number buttons on the remote or PRESET +/– on the player to tune in to your favorite stations. On the remote 1 Press BAND to select the band. (CFD-S47/S47L only) 1 Press BAND to select 2 Press PRESET + or – to tune in the stored station. the band. 2 Press the number buttons to tune in the stored station. EN 20 The Radio
