ページ1に含まれる内容の要旨
Camera Operations Guide [US]
2-050-779-11(1)
Camera
Operations Guide
Read this first
Digital Video Camera Recorder
DCR-PC350
© 2004 Sony Corporation
ページ2に含まれる内容の要旨
For customers in the U.S.A. and Read this first CANADA Before operating the unit, please read this RECYCLING LITHIUM-ION BATTERIES manual thoroughly, and retain it for future Lithium-Ion batteries are recyclable. reference. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location WARNING nearest you. To prevent fire or shock hazard, do not For more information regarding recycling of expose the unit to rain or moisture.
ページ3に含まれる内容の要旨
harmful interference to radio or television reception, which can be determined by turning the equipment off For customers in the U.S.A. and on, the user is encouraged to try to correct the If you have any questions about this product, you may interference by one or more of the following measures: call: – Reorient or relocate the receiving antenna. Sony Customer Information Center 1-800-222-SONY – Increase the separation between the equipment and (7669). receiver. The number below is for th
ページ4に含まれる内容の要旨
To ensure a good grip, fasten the Strap Belt as shown Notes on the LCD panel, viewfinder, and in the following illustration. If the Strap Belt hangs lens out too far, tuck it in the hand pad. The LCD screen and the viewfinder are manufactured using extremely high-precision technology, so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/ or bright points (white, red, blue, or green in color) that appear constantly on the LCD
ページ5に含まれる内容の要旨
Notes on handling the Handycam Station When attaching your camcorder to the Handycam Station, insert your camcorder in the direction of the arrow as shown in the following illustration. Be sure to insert it all the way. When removing your camcorder from the Handycam Station, hold both your camcorder and the Handycam Station as shown in the following illustration, and remove it from the Handycam Station. b Note When disconnecting the AC Adaptor from the Handycam Station, hold both t
ページ6に含まれる内容の要旨
: Features available for tape only. Table of Contents : Features available for “Memory Stick Duo” only. Read this first ............................................................................................. 2 Quick Start Guide Recording movies .................................................................................... 10 Recording still images.............................................................................. 12 Recording/Playing back with ease .......................
ページ7に含まれる内容の要旨
Recording a movie ............................................................................................. 36 Recording a still image ....................................................................................... 37 Making full use of Easy Handycam operation ........................................................... 38 Adjusting the exposure............................................................................. 38 Adjusting the exposure for backlit subjects ...............
ページ8に含まれる内容の要旨
Advanced operations Dubbing/Editing Connecting to a VCR or TV ...............93 Using the Menu Dubbing to another tape ..............94 Selecting menu items ........................ 63 Recording pictures from a VCR or Using the (CAMERA SET) menu TV .................................................95 – PROGRAM AE/WHITE BAL./16:9 Dubbing pictures from a tape to a WIDE, etc. .................................... 65 “Memory Stick Duo” .....................96 Using the (MEMORY SET) menu Dubbin
ページ9に含まれる内容の要旨
Additional Information Using your camcorder abroad ..........126 Usable cassette tapes .....................127 About the “Memory Stick” ................128 About the “InfoLITHIUM” battery pack ................................130 About i.LINK .....................................132 Maintenance and precautions ..........133 Specification ....................................136 Quick Reference Identifying parts and controls ...........139 Index ................................................147
ページ10に含まれる内容の要旨
Quick Start Guide Recording movies 1 Attach the charged battery pack to the camcorder. To charge the battery, see page 16. a Slide the BATT (battery release) b Attach the battery pack with its lever in the direction of 1 and push terminal side facing your camcorder it down in the direction of 2. as shown in the illustration and press Remove the battery terminal cover down the battery pack until it clicks. when it lifts up in the direction of 3. BATT (battery release) lever 2 Insert a casse
ページ11に含まれる内容の要旨
Quick Start Guide 3 Start recording while checking the subject on the LCD screen. The date and time is not set up in the default setting. To set the date and time, see page 21. a Remove the lens cap. b Open the LCD panel. c While pressing the green button, slide the POWER switch down to light up the CAMERA-TAPE lamp. The power turns on. d Press REC START/ STOP. Recording starts. To change to standby mode, press REC START/STOP again. You can also use REC START/STOP of the LCD panel. 4 V
ページ12に含まれる内容の要旨
Recording still images 1 Attach the charged battery pack to the camcorder. To charge the battery, see page 16. a Slide the BATT (battery release) b Attach the battery pack with its lever in the direction of 1 and push terminal side facing your camcorder it down in the direction of 2. as shown in the illustration and press Remove the battery terminal cover down the battery pack until it clicks. when it lifts up in the direction of 3. BATT (battery release) lever 2 Insert a “Memory Stick Duo
ページ13に含まれる内容の要旨
Quick Start Guide 3 Start recording while checking the subject on the LCD screen. The date and time is not set up in the default setting. To set the date and time, see page 21. a Remove the lens cap. b Open the LCD panel. c While pressing the green button, slide the POWER switch repeatedly until the CAMERA-MEMORY lamp lights up. The power turns on. d Press PHOTO lightly. A short beep sound is heard when the focus is adjusted. e Press PHOTO fully. A shutter sound is heard and the still ima
ページ14に含まれる内容の要旨
Recording/Playing back with ease By switching to Easy Handycam operation, recording/playback operation becomes even easier. Easy Handycam operation allows easy recording/playback for even first time users by providing only the basic functions for recording/playback. Press EASY when recording/ playing back. EASY lights up in blue (1) and screen font size increases (2) during Easy Handycam operation. Easy Handycam operation ON For details, see instructions for each operation. See page 36 for
ページ15に含まれる内容の要旨
Getting started Getting started Handycam Station (1) Step 1: Checking supplied items Make sure you have following items supplied Wireless Remote Commander (1) with your camcorder. A button-type lithium battery is already installed. The number in parentheses indicates the number of that item supplied. “Memory Stick Duo” 16MB (1) You can use only a “Memory Stick Duo,” which is about half the size of a standard “Memory Stick,” in A/V connecting cable (1) your camcorder. See page 128 for detail
ページ16に含まれる内容の要旨
1 Attach the charged battery pack to the Step 2: Charging the camcorder. 1 Slide the BATT (battery release) battery pack lever in the direction of 1 and push it down in the direction of 2. You can charge the battery by attaching the Remove the battery terminal cover when “InfoLITHIUM” battery pack (F series) to it lifts up in the direction of 3. your camcorder. b Note You cannot use batteries other than the “InfoLITHIUM” battery pack (F series) (p. 130). Do not short-circuit the DC
ページ17に含まれる内容の要旨
Getting started After charging the battery 5 Insert your camcorder into the The CHARGE lamp turns off when the battery Handycam Station. is fully charged. Disconnect the AC Adaptor from the DC IN jack. To remove the battery pack Battery pack 6 Slide the POWER switch up to OFF (CHG). POWER The CHARGE lamp lights up and charging switch starts. BATT (battery release) lever 1 Set the POWER switch to OFF (CHG). 2 Slide the BATT (battery release) lever in the direction of 1 and push it down
ページ18に含まれる内容の要旨
You can check the battery’s current charge level With LCD BACKLIGHT set to ON and its current remaining recording time both * Battery pack Continuous Typical during charging or when the power is turned off. recording recording 1 Set the POWER switch to OFF (CHG). time time 2 Open the LCD panel. NP-FF50 80 45 3 Press DISPLAY/BATT INFO. NP-FF51 90 50 The battery information appears for about 7 (supplied) seconds. NP-FF70 175 95 Keep the button pressed to view it for about NP-FF71 190 105 20 s
ページ19に含まれる内容の要旨
Getting started Battery pack LCD panel LCD panel * Step 3: Turning the opened closed NP-FF50 125 135 power on NP-FF51 140 155 (supplied) You need to slide the POWER switch NP-FF70 260 285 repeatedly to select the desired power mode NP-FF71 285 310 to record or play. When using this camcorder for the first time, * With LCD BACKLIGHT set to ON. the [CLOCK SET] screen appears (p. 21). b Note The power will not be supplied from the battery pack even when the power cord is disconnected from t
ページ20に含まれる内容の要旨
z Tip If you rotate the LCD panel 180 degrees to the lens Step 4: Adjusting the side, you can close the LCD panel with the LCD screen facing out. LCD panel and If you are using the battery pack for power source, you can adjust the brightness by selecting [LCD BL LEVEL] from the [LCD/VF SET] on the viewfinder (STANDARD SET) menu (p. 85). When you use your camcorder in bright conditions, press LCD BACKLIGHT to switch off the LCD Adjusting the LCD panel screen backlight. ( appears o
