ページ1に含まれる内容の要旨
DIGITAL CAMCORDER
DNW-7/7P
DNW-90/90P
DNW-90WS
DNW-90WSP
DNW-9WS/9WSP
OPERATION MANUAL English
1st Edition (Revised 5)
ページ2に含まれる内容の要旨
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. AVERTISSEMENT Afin d’éviter tout risque d’incendie ou d’électrocution, ne pas exposer cet appareil à la pluie ou à l’humidité. Afin d’écarter tout risque d’électrocution, garder le coffret fermé. Ne confier l’entretien de l’appareil qu’à un personnel qualifié.
ページ3に含まれる内容の要旨
WARNUNG Um Feuergefahr und die Gefahr eines elektrischen Schlages zu vermeiden, darf das Gerät weder Regen noch Feuchtigkeit ausgesetzt werden. Um einen elektrischen Schlag zu vermeiden, darf das Gehäuse nicht geöffnet werden. Überlassen Sie Wartungsarbeiten stets nur qualifiziertem Fachpersonal. For the customers in the USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of th e FCC Rules. These limits are designed to provi
ページ4に含まれる内容の要旨
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The shielded interface cable recommended in this manual must be used wit
ページ5に含まれる内容の要旨
For the Sony Service Center nearest you call 1-800-222- SONY (United States only) For the Factory Service Center nearest you call 416-499- SONY (Canada only) Caution: Do not handle damaged or leaking nickel- cadmium batteries. For the customers in Europe This product with the CE marking complies with the EMC Directive(89/336/EEC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European standards: • EN55103-1: Electromagnetic
ページ6に含まれる内容の要旨
Ce produit est prévu pour être utilisé dans les environnements électromagnétiques suivants: E1 (résidentiel), E2 (commercial et industrie légère), E3 (urbain extérieur) et E4 (environnement EMC contrôlé, ex. studio de télévision). Für Kunden in Europa Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die EMV-Direktive (89/336/EEC) der EG-Kommission. Die Erfüllung dieser Direktive bedeutek Konformität für die folgenden Europäischen Normen: • EN55103-1: Elektromagnetische Interferenz (Emiss
ページ7に含まれる内容の要旨
Table of Contents Chapter 1 Overview 1-1 Features ..................................................................................... 1-1 1-1-1 Camera Features .............................................................. 1-2 1-1-2 VTR Features .................................................................. 1-4 1-2 Example of System Configuration .......................................... 1-6 1-3 Precautions ................................................................................ 1
ページ8に含まれる内容の要旨
3-3 Checking the Recording— Playback .................................... 3-13 3-3-1 Checking the Last Two Seconds of the Recording — Recording Review ......................................................... 3-13 3-3-2 Checking the Recording on the Color Video Monitor — Playback in Color .......................................................... 3-14 Chapter 4 Adjustments and Settings for Recording 4-1 Adjusting the Black Balance and the White Balance ............ 4-1 4-1-1 Adjusting the Black
ページ9に含まれる内容の要旨
4-8-3 Display Mode and Setting Change and Adjustment Progress Messages ........................................................ 4-58 4-8-4 Setting the Marker Display ........................................... 4-61 4-8-5 Recording Superimposed Shot Data in Color Bars ....... 4-63 4-8-6 Setting the Shot ID ........................................................ 4-66 4-8-7 Displaying Time Code and Other Information ............. 4-70 4-9 Adjustments and Settings From the Setup Menu ..............
ページ10に含まれる内容の要旨
5-2 Adjusting the Viewfinder ....................................................... 5-10 5-2-1 Adjusting the Viewfinder Position ................................ 5-10 5-2-2 Adjusting the Viewfinder Focus and Screen ................. 5-12 5-2-3 Detaching the Viewfinder ............................................. 5-13 5-2-4 Detaching the Eyepiece ................................................. 5-15 5-3 Mounting the Lens .................................................................. 5-17 5
ページ11に含まれる内容の要旨
Appendix Specifications ..................................................................................... A-1 Video Camera Section ............................................................... A-2 VTR Section .............................................................................. A-5 Supplied Accessories ................................................................. A-8 Recommended Additional Equipment ...................................... A-8 Glossary ..........................
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
Overview 1-1 Features 1) The DNW-7/7P series Digital Camcorder combines a color video 1 2) 3) 4) camera, which uses IT type Power HAD sensor CCDs , with a BETACAM SX series portable videocassette recorder. Its excellent image quality, sensitivity, portability, and dust- and water-proof 5) 6) construction make it ideal as a camcorder for ENG and EFP in the same way the earlier BVW-300A/300AP. The introduction of a new method of processing digital signals improves the image quality even furthe
ページ14に含まれる内容の要旨
1-1-1 Camera Features 1 The features of the DNW-7/7P/90/90P/90WS/90WSP/9WS/9WSP series camera are described below. • Power HAD sensor CCDs ensure high sensitivity and high image quality. • Digital signal processing has improved picture quality, stability, and reliability. •A setup menu enables you to control features such as status displays, messages, and markers; to select values or functions; and to operate a setup card. •A setup card (not supplied) makes it easy to replicate the recorder setu
ページ15に含まれる内容の要旨
1) • The DynaLatitude function enables detailed adjustment of contrast 1 control in each pixel in accordance with a histogram of luminance signal levels. Useful in shooting scenes which contain both dark and bright spots. •A high-performance viewfinder is adjustable forward, backward and sideways, and has full auxiliary equipment. • Character display functions on the viewfinder indicate switch settings, black and white balance adjustment, and warnings. • Warning indicators and sound inform you o
ページ16に含まれる内容の要旨
1-1-2 VTR Features 1 The VTR features of this camcorder are described below. • Using the Betacam SX format, it provides picture quality as good as or better than the Betacam SP format. It supports nonlinear editing and high-speed transfer, while offering digital audio capability. • Use of low-cost Betacam SX tapes leads to lower running costs. • The shooting date and time, camera ID, cassette number and other information can be recorded on the tape as shot data. • It is possible to record record
ページ17に含まれる内容の要旨
• Optional long-life battery packs are available. 1 • Pressing the VTR START button on the camcorder or the VTR button on the lens ensures recording continuity from the very next frame. •A slot-in UHF portable tuner (WRR-855A, not supplied) can be attached. • By connecting the VA-DN1 Camcorder Interface Adaptor (not supplied) to the 6-pin REMOTE connector, you can control some of the VTR functions from a 9-pin remote control device. Chapter 1 Overview 1-5
ページ18に含まれる内容の要旨
1-2 Example of System Configuration 1 The diagram below shows a typical configuration of the camcorder for ENG and EFP. For more information about connections of the additional equipment and accessories, see Chapter 5, as well as the operation manuals for the connected equipment. Video monitor Color image check BKW-401 Viewfinder Color playback while shooting Rotation Bracket Video monitor Video monitor BVF-VC10W Color Viewfinder Field pickup unit Fog-proof filter (Part No. 1-547- 341-11) RM-P9
ページ19に含まれる内容の要旨
1 Sound signal equipment a) Lens assembly (−2.8 D to +2.0 D) External microphone C-74, etc. (Part No. A-8262-537-A) a) Lens assembly CAC-12 Microphone Holder (−3.6 D to −0.8 D) (Part No. A-8262-538-A) a) Audio equipment Lens assembly (−3.6 D to +0.4 D) WRR-855A UHF Synthesized (Part No. A-8267-737-A) a) Tuner Unit Lens assembly (3 × magnification) WRR-28H/28M/28L/810A/ 860A (−3.6 D to +0.4 D) (Part No. A-8314-798-A) UHF Portable Tuner CCXA-53 Audio Cable Power source Battery AC BC-210/210CE/
ページ20に含まれる内容の要旨
1-3 Precautions Use and Storage 1 Do not subject the camcorder to severe shocks The internal mechanism may be damaged or the body warped. After use Always turn off the power. Before storing the camcorder for a long period Remove the battery pack. Use and storage locations Store in a ventilated place. Avoid using or storing the camcorder in the following places. • Places subject to temperature extremes • Damp places • Places subject to severe vibration • Near strong magnetic fields • In direct su
