ページ1に含まれる内容の要旨
DIGITAL CINEMATOGRAPHY CAMERA
F35
OPERATION MANUAL [English]
1st Edition (Revised 4)
ページ2に含まれる内容の要旨
For the State of California, USA only WARNING Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate To reduce the risk of fire or electric shock, Perchlorate Material : Lithium battery contains perchlorate. do not expose this apparatus to rain or moisture. For the customers in Taiwan only To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. For the customers in the U.S.A. This equipment has been tested
ページ3に含まれる内容の要旨
AVERTISSEMENT WARNUNG Afin de réduire les risques d’incendie ou Um die Gefahr von Bränden oder d’électrocution, ne pas exposer cet elektrischen Schlägen zu verringern, darf appareil à la pluie ou à l’humidité. dieses Gerät nicht Regen oder Feuchtigkeit ausgesetzt werden. Afin d’écarter tout risque d’électrocution, garder le coffret fermé. Ne confier Um einen elektrischen Schlag zu l’entretien de l’appareil qu’à un personnel vermeiden, darf das Gehäuse nicht qualifié. geöffnet werden. Überl
ページ4に含まれる内容の要旨
Table of Contents Chapter 1 Overview 1-1 Features .......................................................................... 8 1-2 Example of System Configuration ............................. 10 1-2-1 SRW-1 Docking System ................................................11 1-2-2 Optical Fiber System Using the CA-F101 .....................11 1-3 Locations and Functions of Parts .............................. 12 1-3-1 Camera Head ..................................................................12
ページ5に含まれる内容の要旨
3-2-7 Selection of a Lens File ..................................................37 3-2-8 Confirmation of the Time Code and Tape Remaining ...38 3-2-9 Confirmation of the Power Voltage and Selection of Fan Operation Mode .............................................................38 3-2-10 ON/OFF of the Character Indication ............................39 3-2-11 Allocation of Functions to the Assignable Buttons and Switch ........................................................................
ページ6に含まれる内容の要旨
Chapter 4 Menu Configuration and Detailed Settings 4-1 Menu Configuration ..................................................... 63 4-2 Basic Menu Operations ............................................... 64 4-2-1 Displaying Setting Pages ...............................................65 4-2-2 Setting the Menu Items ..................................................66 4-2-3 Menu Operation via a Web Browser .............................66 4-3 Menu List ............................................
ページ7に含まれる内容の要旨
Warning/Error Messages ..................................................126 Precautions ........................................................................127 About a “Memory Stick” ...................................................128 Specifications ....................................................................130 Camera Head ...........................................................................130 Interface Box (Supplied) ......................................................
ページ8に含まれる内容の要旨
Chapter 1 Overview 1 Overview Chapter “overcranking” or “undercranking” a cinematic film camera. 1-1 Features Frame-rate settings for this function are variable from 1 to 50 FPS. The F35 is a 1CCD digital cinematography camera Multiple frame formats equipped with Super 35-mm type IT progressive CCD The camera covers the1080 formats of different types to array with a total of 6,600,000 picture elements (effective allow it to be used for high-end content creation, including pixel count
ページ9に含まれる内容の要旨
Chapter 1 Overview Dockable system of the SRW-1 HD Portable Monitor output selection Digital Recorder For monitor outputs, the user can select flexibly whether to A dockable interface system is employed to conform to mix character information and markers, whether to apply versatile shooting conditions and on-site demands. alternative monitor LUT (look-up table) other than that 1) The SRW-1 can be docked directly on the top or rear of applied to the camera signal, or how to mix the playbac
ページ10に含まれる内容の要旨
Chapter 1 Overview LOCK 1-2 Example of System Configuration The diagram below shows a system configuration example For more information about the fittings, connections, or to use of this camera. use of additional equipment and accessories, see “Chapter In this manual, an optional HDVF-C35W HD Electronic 2 Installation and Preparations” as well as the operation Viewfinder is used to instruct how to operate the unit. manuals for the connected equipment. Products for battery operation Viewfi
ページ11に含まれる内容の要旨
Chapter 1 Overview 1-2-1 SRW-1 Docking System An SRW-1 recorder can be mounted either on the top or rear of the camera head. Power can also be supplied to the recorder via the DC IN connector (LEMO 8-pin) of the camera head. Upper docking Rear docking The interface box can be attached to the rear. The interface box can be attached to the top. Interface box (supplied with the camera) SRW-1 HDVF-C35W SRW-1 HDVF-C35W Interface box (supplied with the DC 12 V power camera) DC 12 V power 1-2
ページ12に含まれる内容の要旨
Chapter 1 Overview LENS 1-3 Locations and Functions of Parts 1-3-1 Camera Head Front panel Ventilation holes (intake) a VF1 connector f Viewfinder shoe VF1 b CONTROL PANEL connector g Flange focal length adjustment screw Lens mount CONTROL PANEL h Lens fixing lever i Lens mount cap c Accessory receptacles Ventilation holes (intake) VF2 j Shutter emergency open screw d VF2 connector e LENS connector a VF1 (viewfinder 1) connector (20-pin) f Viewfinder shoe Connect a viewfinder (optional). Att
ページ13に含まれる内容の要旨
Chapter 1 Overview Left panel a Level vial k Measure hook/focus reference mark b L handle c Accessory pockets d DC IN connector j DC OUT 24V connector i DC OUT 12V connector h (network) connector g EXT I/O connector f CAM POWER switch e Power indicators a Level vial d DC IN connector (LEMO 8-pin) Used as a reference to check that the camera stands Power is supplied by using a specified power cord. horizontally. It can be fine-adjusted when required. e Power indicators If fine-adjustment is
ページ14に含まれる内容の要旨
Chapter 1 Overview h (network) connector (RJ-45 type, 10BASE-T, VORSICHT 100BASE-TX) Aus Sicherheitsgründen nicht mit einem Peripheriegerät- For control from the MSU-900/950 Master Setup Unit, etc. Anschluss verbinden, der zu starke Spannung für diese via a network cable. Buchse haben könnte. Folgen Sie den Anweisungen für The necessary settings are made using the NETWORK diese Buchse. menu displayed on the viewfinder or monitor screen. i DC OUT 12V (DC 12V power output) connector CAUT
ページ15に含まれる内容の要旨
Chapter 1 Overview The firmware of the SRW-1 may be required to be updated Display/menu operation block for use with this camera. For details, consult your local Used to operate displays on the subdisplay and the Sony representative. viewfinder/monitor screen. d Assignable 4/AUTO BLK BAL (auto black balance) For details on menu operations, see “3-2-1 Basic switch Operation of the Subdisplay” (page 32) and “4-2 Basic Push the switch downward to the AUTO BLK BAL side to Menu Operations”
ページ16に含まれる内容の要旨
23 Chapter 1 Overview f MENU SEL (selection) /ENTER dial Used to select or set the items on the subdisplay or the menu items on the viewfinder (monitor) screen. Rear panel f RUN indicator and ON/OFF switch OFF ON a Safety release tab b Accessory clamp lever g GENLOCK IN connector h TEST OUT connector i MONITOR OUT HD SDI connectors 1/2 c Lock release knob REMOTE j REMOTE connector d Accessory mount lever DC IN connector (see page 13) e Recorder/interface box receptacles Ventilation holes (
ページ17に含まれる内容の要旨
Chapter 1 Overview 1-3-2 Assistant Panel (Supplied) 1-3-3 Interface Box (Supplied) The most parts are common to those on the right panel of Being attached to the top or the rear of the camera head, it the camera head. Connecting the panel to the CONTROL transfers signals and power to/from the camera head. PANEL connector (page 12) of the camera head permits the camera and recorder to be operated at hand. a AUDIO IN CH-1/CH-2 connectors b Audio input selection switches a CAMERA connector LO
ページ18に含まれる内容の要旨
Chapter 1 Overview e Camera connector 1 When the interface box is mounted on the top or rear of the camera head, video/audio and control signals are sent/ received to/from the camera head. f Camera connector 2 When the interface box is mounted on rear of the camera head, power is sent/received to/from the camera head. Locations and Functions of Parts 18
ページ19に含まれる内容の要旨
Chapter 2 Installation and Preparations Installation and 2 Preparations Chapter 3 Release the lock by sliding the lock-release knob in the direction of the arrow (1 in the figure below) then pull 2-1 Mounting the up the accessory mount lever (pull it toward the lens when mounting on the top) (2 in the figure below). Interface Box The supplied interface box can be attached to the top or rear of the camera head. Connection between the camera head and the interface box is achieved by mou
ページ20に含まれる内容の要旨
Chapter 2 Installation and Preparations 5 Rotate the accessory mount lever downward (pull it in To detach the opposite direction of the lens when attaching to the top). 1 Rotate the accessory clamp lever upward (toward the lens when attaching to the top) (1 in the figure below). 2 Release the lock by sliding the lock-release knob in the direction of the arrow (2 in the figure below) then pull up on the accessory mount lever (3 in the figure below) (pull it toward the lens when mountin
