ページ1に含まれる内容の要旨
Installation Instructions / Warranty
Focus
31701001
31711001
Focus
31721001
ページ2に含まれる内容の要旨
Focus Lavatory Faucet 31701001 Focus Bidet Faucet 31721001 31701001 31721001 Technical Specification Recommended water pressure 22 - 72 PSI Recommended hot water temp. 120° - 140°F* Hole size in mounting surface 1 3/8” Maximum mounting surface thickness 1 5/8” Flow rate 2.2 gpm max. 3/8” supply hoses – requires 3/8” compression fittings (not included) Bidet mixer 31721001 is not intended for use on a bidet with a vertical spray. For best results, Hansgrohe recommends installation by a license
ページ3に含まれる内容の要旨
Installation Place the faucet and the sealing ring on the countertop. From below, install the mounting washer on the mounting bolt. Install and tighten the mounting collar. sealing ring mounting bolt mounting washer mounting collar Attach the hoses to the supply stops with 3/8” compres- sion fittings (not included). Use two wrenches, as shown, to prevent the hoses from twisting or from becoming loose. Install the pop-up drain (see page 4). Turn on the water and check all connections for lea
ページ4に含まれる内容の要旨
Install the Pop-up Drain* plunger Remove the plunger assembly. height adjuster Unscrew the drain outlet flange from the tee. flange Unscrew the tailpiece from the tee. Wrap the threads with plumbers’ thread tape and replace. Install the white, flexible sealing gasket to sealing gasket the flange. Place it in the sink outlet. From under the sink, install the black mack mack gasket pull rod gasket, white friction ring and retainer nut to the flange. Do not tighten the nut against frict
ページ5に含まれる内容の要旨
Re-set the High Temperature Limit Stop (optional) Close the drain OR cover it with a wash cloth. Use the included 4 mm Allen wrench to push the screw cover into the handle. Retrieve the screw cover when the handle is removed. Use the 4mm Allen wrench to loosen the handle screw 4 complete revolutions. Remove the handle and put it in a safe place. Remove the decorative nut cover and put it in a safe place. Remove the handle screw from the stem of the cartridge. Remove the high temperatu
ページ6に含まれる内容の要旨
Replacement Parts 1 2 1.1 3 13 4 8 10 5 9 11 12 7 1 handle 31793000 1.1 screw cover 9338000 2 flange 9740000 3 nut 97209000 4 cartridge 92730000 5 seal 95008000 aerator 13085000 7 fixing set 901000 8 connection hose 9321001 9 pull rod 957000 10 handle screw 9059000 11 o-ring, 30 x 2 9818000 12 o-ring 35 x 2 9204000 13 ball joint 9203000
ページ7に含まれる内容の要旨
Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning. Cleaning Materials for Faucets and Showers Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when cleaning faucet
ページ8に含まれる内容の要旨
and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no-rinse” cleaning products, or the use of the product
