ページ1に含まれる内容の要旨
USB Numeric Calculator Keypad
Model #: KP2700USBHUB
User’s Manual
Rev. 060801
ページ2に含まれる内容の要旨
User’s Record: To provide quality customer service and technical support, it is suggested that you keep the following information as well as your store receipt and this user’s manual. Date of Purchase: __________________________________ Model Number: __________________________________ Serial Number: __________________________________ Product Rev Number (located below the UPC on the package): __________________________________ 2
ページ3に含まれる内容の要旨
Package Contents: Your new Keypad will ship with the following items. § USB Numeric Calculator Keypad With Built-In 2 Port USB Hub § USB Retractable Cable § 1 AAA Alkaline Battery § User’s Manual § Warranty Information System Requirements: Please be sure that you meet all of the system requirements below to avoid difficulties during installation. § IBM PCs or 100% Compatibles ® § Windows ME, 2000, XP § Available USB Port System Specifications: Your new Keypad complies w
ページ4に含まれる内容の要旨
Special Function Keys: Your Keypad has a set of special function keys located underneath the LCD screen, please see the chart below for a description of each key: Button Description Memory Add Press this button to add the number shown on the LCD screen to the memory. Memory Subtract Press this button to subtract the number shown on the LCD screen from the memory. Memory Re-Call Press this button to show the number saved in the memory onto the LCD screen. Switching Mode Press this
ページ5に含まれる内容の要旨
Installation: Your Keypad can be operated with one AAA battery or by connecting the enclosed USB cable from your Keypad to your computer. For instructions on both of these operating methods, please refer to the appropriate section below: Using Your Keypad With The Retractable USB Cable: 1. To adjust the length of the Retractable USB Cable, pull both ends of the cable carefully (NOTE: the maximum length of the USB cable is approximately 30 inches). 2. To retract the Retractable USB C
ページ6に含まれる内容の要旨
Using Your Keypad With A Battery: 1. To install a battery into your Keypad, remove the Battery Compartment Cover on the back of the Keypad, and install the enclosed AAA battery into your Keypad following the battery orientation guide in the battery bay, and then slide the cover back onto your Keypad until it securely locks. 2. Turn on the Power Switch on the back of your Keypad. 3. Your Keypad is now ready to be used in CALC (Calculator) mode. 4. After 5 minutes of idle time, your Ke
ページ7に含まれる内容の要旨
Using the USB Hub: There is a built-in USB hub on your Keypad that gives you two additional USB ports. To use the USB hub on your Keypad, please follow the instructions below: 1. Make sure your computer is turned on and you have properly installed your Keypad following the Installation section in this manual. 2. Connect a USB device into one of the USB ports on the top of your Keypad. 3. Your computer will detect the USB device connected to your Keypad. 4. Depending on the USB device y
ページ8に含まれる内容の要旨
. . FCC Information: FCC This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part 15 of Federal Communications Commission (FCC) rules. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful
ページ9に含まれる内容の要旨
Warranty Information: Gear Head, LLC warrants that this product shall be free from defects in materials and workmanship for the reasonable lifetime of the product. If the product is defective, Gear Head, LLC’s sole obligation under this warranty shall be at its election, subject to the terms of this warranty, to repair or replace any parts deemed defective. This warranty is for the exclusive benefit of the original purchaser and is not assignable or transferable. THIS WARRANTY
