Apple Power Mac 073-0937の取扱説明書

ページ1に含まれる内容の要旨

! Power Mac G4 / Macintosh Server G4
Zip Drive Bezel
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Note: Online instructions are available at http://www.info.apple.com/installparts/.
Warning: During this procedure, keep small parts away from children.
Tools Required
No tools are required for this procedure.
Opening the Computer
Warning: Always shut down your comput

ページ2に含まれる内容の要旨

6. Touch the metal PCI access covers on the back of the computer. (Figure 1) Important: To avoid electrostatic discharge, always ground yourself by touching the port access covers before you touch any parts or install any components inside the computer. To avoid static electricity building back up in your body, do not walk around the room until you have completed the installation and closed the computer. Figure 1 7. Unplug the power cord. Warning: The power supply in your computer

ページ3に含まれる内容の要旨

Removing the Installed Zip Drive Bezel 1. From inside the chassis, behind the front panel, push the bezel tab forward to release the right side of the bezel. (Figure 2) 2. Disconnect the hook on the left side of the bezel from the front panel and remove the bezel from the computer. Figure 2 Installing the Replacement Zip Drive Bezel 1. Align the hook on the left edge of the replacement bezel with the left edge of the opening in the front panel. 2. Rotate the bezel until it is us

ページ4に含まれる内容の要旨

! Apple Computer, Inc. © 2004 Apple Computer, Inc. All rights reserved. Under the copyright laws, this document may not be copied, in whole or in part, without the written consent of Apple. The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federa