ページ1に含まれる内容の要旨
XPC User Guide
For the : SA76
ページ2に含まれる内容の要旨
Shuttle® XPC Installation Guide Copyright ©2009 by Shuttle® Inc. All Rights Reserved. No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means such as electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise, without prior written permission from Shuttle® Inc. Other brands and product names used herein are for identification purposes only and may be trademarks
ページ3に含まれる内容の要旨
Safety Information Read the following precautions before setting up a Shuttle XPC. CAUTION Incorrectly replacing the battery may damage this computer. Replace only with the same or equivalent as recommended by Shuttle. Dispose of used batteries according to the manufacturer's instructions. Laser compliance statement The optical disc drive in this PC is a laser product. The drive's classification label is located on the drive. CLASS 1 LASER PRODUCT CAUTION： INVISIBLE LASER RADIATION WHEN OPEN.
ページ4に含まれる内容の要旨
TABLE OF CONTENTS Driver and Software Installation...................................................................................1 Mainboard Driver CD .............................................................................................1 Install Mainboard Software .............................................................................2 Appendix......................................................................................................................3 Enter the BIOS
ページ5に含まれる内容の要旨
Driver and Software Installation Motherboard Driver DVD Note : The DVD contents attached in SA76 motherboard are subject to change without notice. The product's specifications will depend upon the actually shipping product. The Motherboard Driver DVD contains all the motherboard drivers necessary to optimize the performance of this XPC in a Windows OS. Install these drivers after ® installing Microsoft Windows . ® ® Navigation Bar Description : Install Motherboard Drivers - Install A
ページ6に含まれる内容の要旨
English Installing Motherboard Software Insert the attached DVD into your DVD-ROM drive. The DVD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in My Computer to bring up Shuttle Mainboard Software Setup screen. Click the “Install Motherboard Drivers“ bar. Individually install the following drivers. Install AMD Chipset Driver Install Realtek Audio Driver Install AMD VGA Driver Install Marvell Gigabit LAN Driver Install AMD Raid D
ページ7に含まれる内容の要旨
Appendix BIOS Settings The SA76 BIOS ROM has a built-in Setup program that allows users to modify basic system configuration. This information is stored in battery-backed RAM so that it retains Setup information even if the system power is turned off. The system BIOS manages and executes variety of hardware related functions in- cluding: System date and time Hardware execution sequence Power management functions Allocation of system resources Enter the BIOS To enter the BIOS (Basic Input / Out
ページ8に含まれる内容の要旨
English The Main Menu Once you enter the AwardBIOS(tm) CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press to accept and enter the sub-menu. Note that a brief description of each highlighted selection appears at the bottom of the screen. Setup Items The main menu includes the following main setup categories. Recall that some systems
ページ9に含まれる内容の要旨
PnP / PCI Configurations This entry appears if your system supports PnP / PCI. PC Health Status This entry displays the current system temperature, Voltage, and FAN settings. Frequency/Voltage Control Use this menu to specify your settings for frequency/voltage control. Load Default Settings Use this menu to load the BIOS default values that are factory-set for optimal system operation. While Award has designed the custom BIOS to maximize performance, the factory has the right to change
ページ10に含まれる内容の要旨
English Standard CMOS Features The items in the Standard CMOS Setup Menu are divided into several categories. Each category includes none, one or more than one setup items. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. Date Set the system date. Note that the 'Day' automatically changes when you set the date. Time The time is converted based on the 2-hour military-time clo
ページ11に含まれる内容の要旨
Base/Extended/Total Memory Theseitems are automatically detected by the system at start up time. These are display-only fields. You can't make change to these fields. ****************************************************** IDE Adapters The IDE adapters control the hard disk drive. Use a separate sub-menu to configure each hard disk drive. IDE HDD Auto-Detection Press to auto-detect HDD on this channel. If detection is successful, it fills the remaining fields on this menu. Press
ページ12に含まれる内容の要旨
English Cylinder Set the number of cylinders for this hard disk. Min = 0, Max = 6 Head Set the number of read/write heads. Min = 0, Max = 2 Precomp Warning: Setting a value of 6 means no hard disk. Min = 0, Max = 6 Landing zone Set the Landing zone size. Min = 0, Max = 6 Sector Number of sector per track. Min = 0, Max = 2 ****************************************************** 8
ページ13に含まれる内容の要旨
Advanced BIOS Features This section allows you to configure your system for basic operation. You have the opportunity to select the system's default speed, boot-up sequence, key- board operation, shadowing, and security. CPU Feature Options are in its sub-menu. Press to enter the sub-menu of detailed options. AMD Cool&Quiet control This item allows you to set the AMD Cool&Quiet control. The choice: Auto or Disabled. Hard Disk Boot Priority This item allows you to select Hard Dis
ページ14に含まれる内容の要旨
English Enabled Activates automatically when the system boots up,causing a warning message to appear when anything attempts to access the boot sector or hard disk partition table. Disabled No warning message will appear when anything attempts to access the boot sector or hard disk partition table. The choice: Enabled or Disabled. Quick Power On Self Test This item speeds up Power-On Self Test (POST) after you power on the computer. If it is set to enabled, BIOS will shorten or skip
ページ15に含まれる内容の要旨
HDD Security Freeze Lock This item allows you to enable/disable the HDD Security Freeze Lock. Enabled - prevents any external application from locking Hard drive except for BIOS. The choice: Enabled or Disabled. Delay For HDD This item allows you to set delay for HDD. The choice: 0~. Full Screen LOGO Show This item allows you to enable/disable the Full Screen LOGO Show. The choice: Enabled or Disabled. English
ページ16に含まれる内容の要旨
English Integrated Peripherals On-Chip SATA Device Option are in its sub-menu. Pressto enter the sub-menu of detailed options. OnChip SATA Channel This item allows you to enable or disable the SATA Controller. The Choice: Enabled or Disabled. OnChip SATA Type This item allows you to set the OnChip SATA Type. The choice: RAID, AHCI, Legacy IDE or Native IDE. Not support RAID 0 function in RAID mode. Onboard Devices Option are in its sub-menu. Pressto enter the sub-menu of
ページ17に含まれる内容の要旨
UMA Frame Buffer Size This item allows you to set the UMA Frame Buffer Size. The Choice: 32MB, 64MB, 128MB, 256MB or 512MB. Surround View This item allows you to set the Surround View. The Choice: Auto, Disabled or Enabled. High Definition Audio This item allows you to set the High Definition Audio. The choice: Enabled or Disabled. Onboard LAN Function Decide whether to invoke the onboard LAN chip. The choice: Enabled or Disabled. Onboard Lan Boot ROM Decide whether to invoke the boo
ページ18に含まれる内容の要旨
English CIR Function This item allows you to set the CIR Function. The choice: Enabled, or Disabled. USB Device Setting Option are in its sub-menu. Pressto enter the sub-menu of detailed options. USB 2.0 Controller Enable or Disable Universal Host Controller Interfacefor Universal Serial Bus. The choice: Enabled or Disabled. USB Operation Mode Auto decide USB device operation mode. High speed: If USB device was high speed device, then it operated on high speed mode.If USB devic
ページ19に含まれる内容の要旨
Power Management Setup The Power Management Setup allows you to configure your system to most effectively saving energy while operating in a manner consistent with your own style of computer use. ACPI Function This item allows you to enable/disable the Advanced Configuration and Power Management (ACPI). Always "Enabled". ACPI Suspend Type This item allows you to select sleep state when suspend. The choice: S(POS) or S (STR). Wake-Up by PCI card This item allows you to set the
ページ20に含まれる内容の要旨
English Date(of Month) Alarm This item selects the alarm Date (day of the month). Key in a DEC number: Min=0, Max=. Time(hh : mm : ss) Alarm This item selects the alarm Time. [hh] Key in a DEC number: Min=0, Max=2. [mm/ss] Key in a DEC number: Min=0, Max=9. Power on By PS2 Keyboard This item allows you to set the Keyboard Power On function. Only supports S/S. The choice: Disabled, password, Hot KEY, Any KEY. KB Power ON Password This item allows you to set the KB Power On
