ページ1に含まれる内容の要旨
1
Personal Computer
Reference Manual
Model No. CF-T2 Series
XP
We recommend that this Reference Manual be printed.
ページ2に含まれる内容の要旨
Read Me First 2 Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation easier to understand. If the user has logged on without the administrator authority, some functions may not be executable, and some screens may not be displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions. Confirm the latest information on optional products in catalogs, etc. Illustration
ページ3に含まれる内容の要旨
Read Me First 3 About Display Mode Internal LCD (Notebook) This computer's display External Display (PC monitor) External display connected to this computer Simultaneous display To display the same screen on both the LCD and (Intel(R) Dual Display Clone) external display Extended Desktop To use both the internal LCD and the external display as an extended display domain. You can drag a window between the internal LCD and the external display each other. The terminology in ( ) is the one use
ページ4に含まれる内容の要旨
Key Combinations 4 CAUTION Do not press the following key combinations repeatedly in (quick) succession. Also, do not press different key combinations quickly one after another. Do not press the following key combinations while using the touch pad (external mouse), touchscreen or other keys. NOTE Do not press the following key combinations until you log on to Windows and the hard disk drive indicator turns off. Note, however, that the key combinations Fn+F1, Fn+F2 and Fn+F3 are operabl
ページ5に含まれる内容の要旨
Key Combinations 5 Key Functions Popup Window (Displayed after logging on to Windows) Fn+F3 Display change (When the external display is connected) By pressing this key combination, you can select either an external display, internal LCD or simultaneous. ( page 61) CAUTION Do not press another key until the display destination has been completely switched. Do not press this key combination in the following conditions. While MPEG files are playing. When the Extended Desktop is
ページ6に含まれる内容の要旨
Key Combinations 6 Key Functions Popup Window (Displayed after logging on to Windows) Fn+F4 Speaker on/off switch Pressing this key combination turns on/off audio OFF from the internal speaker and headphone jack. (MUTE) NOTE ON Disabling the speakers will also disable the warning beep. Speakers connected to the USB port cannot be muted. Fn+F5 Volume control (down) Fn+F6 Volume control (up) Pressing this key combination adjusts the volume of the internal speaker and headphone jack. NOTE T
ページ7に含まれる内容の要旨
Key Combinations 7 Key Functions Popup Window (Displayed after logging on to Windows) Fn+F9 Remaining capacity of the battery pack When the battery pack is inserted in the computer (example) When the battery pack is not inserted in the computer Fn+F10 Shut down using the hibernation function Pressing this key combination causes the current status of the computer to be saved to the hard disk, and shuts down the computer. ( page 23) Fn+NumLk The functions differ depending on the appl
ページ8に含まれる内容の要旨
Key Combinations 8 Hotkey Settings There are two Fn key functions as follows: Fn key lock function After Fn is pressed once, it stays in the "pressed" position until another key is pressed. This is convenient when it is difficult to press two buttons simultaneously. Popup windows display ON/OFF NOTE The Hotkey settings can be set separately for each user. When using with the Fn and Ctrl functions interchanged ( page 82), read with Fn and Ctrl reversed. 1 Run the Hotkey Settings. Select
ページ9に含まれる内容の要旨
Key Combinations 9 C. Disable popup Add the check mark if you want to turn the popup window display function OFF. "Full Screen" of [Command Prompt] or MPEG files may change to a window *2 display if Fn+Fx keys are pressed. To prevent this, turn the popup window display function OFF. 3 Select [OK]. *1 If MUTE is set, you will not hear a beep. *2 "Fx" indicates any function key from F1 to F10.
ページ10に含まれる内容の要旨
LED Indicators 10 Power status Not lit Power off / Hibernation mode Green Power on Blinking green Standby mode Battery pack status page 37 Caps Lock This indicator lights green when Caps Lock is pressed. Subsequent non-shifted input is capitalized. NumLk This indicator lights green when NumLk is (Numeric key) pressed. When the green light is on, if Fn is pressed along with keys on certain other segments of the keyboard, then those keys will operate as numeric keys. The [Enter] key fu
ページ11に含まれる内容の要旨
LED Indicators 11 ScrLk This indicator lights green when Fn+ScrLk are (Scroll lock) pressed. Scroll lock functions differently depending on the application. Hard disk drive status This indicator lights when the hard disk drive is accessed. SD memory card status This indicator lights when the SD memory card or MultiMedia card is accessed.
ページ12に含まれる内容の要旨
Touch Pad 12 Use the touch pad to move the cursor on the screen and perform computer operations. A. Work Surface (touch pad) B. Left Button C. Right Button Function Operation Moving the Cursor Move the tip of your finger lightly over the work surface. Tapping/Clicking tapping or clicking Double-Tapping/Double- Clicking double-tapping or double-clicking Dragging Two quick taps, but on the second tap leaving your finger
ページ13に含まれる内容の要旨
Touch Pad 13 NOTE Refer to [Mouse Properties] for information on basic operations other than the above. To display [Mouse Properties]: Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse]. Sensitivity when touching the touch pad can be adjusted. ( page 16) When an external mouse is connected and the cursor does not operate properly: In the [Main] menu of the Setup Utility, set [Touch Pad] to [Disable]. When you want to use the touch pad again, return the setting to
ページ14に含まれる内容の要旨
Touch Pad 14 To scroll up (trace counter-clockwise) Scrolling will begin more easily if you start from the position marked by the and trace as indicated by the arrow. On screens that cannot be scrolled (e.g., desktop screen), if you use the touch pad as described in Step 3 ( page 13), the computer may try to scroll the screen, causing the cursor to freeze. If this happens, remove your finger from the touch pad and begin again, this time starting from the center of the touch pad. 4 Onc
ページ15に含まれる内容の要旨
Touch Pad 15 Using the Virtual Scrolling Function NOTE Because the Touch Pad utility and the Virtual Scrolling function both offer scrolling functions that use the touch pad, these two features cannot be used simultaneously. If you try to use them at the same time, a message may be displayed asking you if you want to enable the Touch Pad utility. To use the Touch Pad utility: Select [Yes]. The Virtual Scrolling function will be disabled. To use the Virtual Scrolling function: Select [No]
ページ16に含まれる内容の要旨
Touch Pad 16 8 Select [Virtual Scrolling], add a check mark for the scroll functions you want to use, then select [OK]. 9 Select [OK] at [Mouse Properties]. NOTE To begin using the Touch Pad utility again: A Log on with the administrator authority. B Run the setup program. Select [start] - [Run], input [c:\util\touchpad\setup.exe], then select [OK]. C Select [Next] at the welcome message. D Select [Finish]. At the confirmation message asking if you want to enable the Touch Pad utility, selec
ページ17に含まれる内容の要旨
Touch Pad 17 PalmCheck™ By dragging slide bar (A) to the [Maximum] position, you can prevent the cursor from moving unintentionally. By dragging slide bar (A) to the [Minimum] position, you can enable the cursor to move even with a light touch of the palm on the touch pad. Touch Sensitivity When slide bar (B) is dragged to the [Heavy Touch] position, the cursor will only move with a strong touch on the touch pad. When slide bar (B) is dragged to the [Light Touch] position, the curso
ページ18に含まれる内容の要旨
Touchscreen 18 Your computer is equipped with a touchscreen function allowing you to perform the same operations as the touch pad or mouse by touching the surface of the display with the stylus (included). The following explanation gives one example (for the default settings). The operation settings can be changed. ( page 21) Functions Operation Moving the cursor The cursor is moved to the location pointed by the stylus. Clicking (Tapping) One tap Double-clicking (Double-tapping) Two quic
ページ19に含まれる内容の要旨
Touchscreen 19 To right-click: Use on taskbar. A Select on the taskbar. changes to . B Select the object you want to right-click. changes to . If you make a mistake and select , select to return to . Use button selector. A Right-click on on the taskbar, and select [Button selector]. The screen on the left will be displayed. Operation method is the same as on the taskbar (see above). If you want to keep this screen visible at all times, select (A), and select to add a check
ページ20に含まれる内容の要旨
Touchscreen 20 selected, the operation when the touchscreen is tapped will change to "right-click." Also, the touchscreen switching icon on the taskbar ( or ) will be reversed. NOTE Select to view [Important Tips] for using the touchscreen. You can also view [Important Tips] using the following procedures. Select [Important Tips] in [start] - [All Programs] - [Panasonic] - [On-Line Manuals].
