ページ1に含まれる内容の要旨
STB-2101H
IP Set-Top Box
Firmware v3.6
Edition 1, 03/2010
Copyright 2010
ZyXEL Communications Corporation
www.zyxel.com
ページ2に含まれる内容の要旨
Device Panels POWER/REMOTE LED ON/OFF POWER E-SATA USB HDMI S/PDIF A/V PORT PORT PORT PORT PORT ETHERNET PORT 2
ページ3に含まれる内容の要旨
ENGLISH Overview The STB-2101H is a set-top box that connects your television to the Internet. Use the STB-2101H to watch Internet television (IPTV) or Video on Demand (VOD) on your regular TV. How It Works B A C D Your STB-2101H IP Set-Top Box (A) connects to your Internet access device (B); this can be a broadband router, a wireless router, a cable modem, and so on, just as long as it provides connectivity to the Internet. Your television set (C) also connected to the STB-2101H, and pro
ページ4に含まれる内容の要旨
Hardware Connections Take the following steps to set up your STB-2101H’s hardware connections. Use either the cables that came with your STB-2101H, or those that came with your TV or Internet access device. 3 2 1 1. Connect your TV (and audio system, if required) to the STB-2101H’s audiovisual ports using either the included cables or those that came with your TV. Refer to the next figure for some example connections. 2. Connect your Internet access device (such as a broadband modem or ro
ページ5に含まれる内容の要旨
ENGLISH The STB-2101H has a variety of options for connecting your TV (and audio system). Use the hardware connections best suited to your equipment; the following figure shows some examples. Turn On the STB-2101H Once you have made the hardware connections, take the following steps to start up the STB-2101H. 1. Turn your television on. Change it to the channel or setting you normally use to watch videos or DVDs. For example, select the “VIDEO” input option, or press the “AV” button (look
ページ6に含まれる内容の要旨
EXAMPLE 2. Press the ON/OFF button on the rear of the STB-2101H. The Power LED on the front of the STB-2101H lights up. It blinks while the STB-2101H is starting up, then shines steadily green once the STB-2101H is ready (this may take a little while). The Ethernet LED on the front of the STB-2101H turns green once the STB-2101H has finished starting up. If the Power or Ethernet LEDs do not behave as expected, first check the STB-2101H’s connections. Make sure that the power is on and the
ページ7に含まれる内容の要旨
ENGLISH The Remote Control Before you first use the remote control, take the following steps to insert two AAA-size batteries. 1. Press the battery cover release catch in and lift the cover off. 2. Press the batteries into the compartment. The negative (-) end of each battery should be at the end of the slot that has a spring. 3. Replace the cover. Quick Reference The following picture shows your STB-2101H’s remote control, and identifies the buttons you need to use in this Quick Start Gui
ページ8に含まれる内容の要旨
EXAMPLE The Menu System: TV and Video The STB-2101H’s menu system allows you to select the TV channels and Video on Demand (VOD) services you want to watch from your service provider. Use the remote control to navigate the menu system. This is only an example - the actual menus you see depend on your IPTV service provider. When the STB-2101H is ready to use, the Home menu displays. Use the HOME key on the remote control to return to this menu at any time. 1. Select the Live TV or VOD optio
ページ9に含まれる内容の要旨
EXAMPLE EXAMPLE ENGLISH For Live TV, the channel selection menu displays. For VOD, the VOD menu appears. 9
ページ10に含まれる内容の要旨
2. For Live TV, highlight the channel you want to watch using the navigator’s and keys. The small screen on the bottom right shows the current program. For VOD, highlight the video you want to watch. 3. Press the OK key. The program is shown in full screen. 4. For Live TV, use the CHANNEL + and - keys to change the channel. For VOD, use the video controls to rewind, fast-forward, pause and so on. If you want to return to the HOME menu, press the HOME key. 10
ページ11に含まれる内容の要旨
ENGLISH Remote Control Reference The following figure shows the front of the STB-2101H’s remote control, and identifies its buttons. 11
ページ12に含まれる内容の要旨
The following table describes the remote control’s button functions. BUTTON FUNCTION On / Standby Use this to turn the STB-2101H on, or put it in standby mode (use the ON/OFF switch on the STB-2101H’s rear panel to turn it off). L/R Use this to change the audio balance between the left and right speakers. Alphanumeric Keypad Use these to enter numbers, letters and symbols. Volume + / - Use this to turn the sound from the STB-2101H up or down (you may also need to alter your TV’s volum
ページ13に含まれる内容の要旨
ENGLISH BUTTON FUNCTION Menu Use this to access the STB-2101H’s setup menus. Rec (This key is reserved for future use.) Color Keys (These keys are reserved for future use.) Display Keyboard Use this to enter letters and symbols. Back Use this to return to the previous page in the menu. Entering Numbers, Letters and Symbols Use the alphanumeric keypad (0 ~ 9, # and *) to enter numbers, letters and symbols. • Numeric Mode: To enter numbers, just press the keypad keys normally. • Alphanumeric
ページ14に含まれる内容の要旨
The following table shows the characters you can enter: 1. : / , 2a b c 3d e f 4g h i 5j k l 6m n o 7p q r s 8t u v 9w x y z 0 [SPACE]-_ ? ! ~ @ *| % ^ & * ( ) + = [ ] { } ‘ =, <> \ $ # Licensed Hardware Codecs Supply of this product does not convey a license or imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other
ページ15に含まれる内容の要旨
ENGLISH Viewing a Product’s Certification(s) 1. Go to www.zyxel.com. 2. Select your product from the drop-down list box on This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Please visit "ftp:// opensource.zyxel.com/STB/STB-2101H/" for specific license terms and additional information. To obtain the source code covered under those Licenses, please check support@zyxel.com.tw to get it. 15
ページ16に含まれる内容の要旨
16
