ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Elo Entuitive Touchmonitor User Guide 15" LCD Desktop Touchcomputer ESY1525L/ESY1527L Touchcomputer Series Revision D P/N 008594 Elo TouchSystems, Inc. 1-800-ELOTOUCH www.elotouch.com
ページ3に含まれる内容の要旨
Copyright © 2004 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes
ページ4に含まれる内容の要旨
Table of Contents Chapter 1 Chapter 3 Introduction 1 Safety/Servicing the Touchcomputer 13 Precautions . . . . . . . . . . . . . . . . . . . . 1 Chapter 4 About the Product . . . . . . . . . . . . . . . . . 1 Operating System . . . . . . . . . . . . . . . 2 Technical Description 15 Windows XP Pro and 2000 Pro . . . . . . . 2 Block Diagram . . . . . . . . . . . . . . . . . 15 Windows CE .Net Ver4.2 . . . . . . .
ページ5に含まれる内容の要旨
Altitude . . . . . . . . . . . . . . . . . . . . . 35 Warranty 37 Index 39 2
ページ6に含まれる内容の要旨
C HAP T ER C HAP T ER 1INTRODUCTION Congratulations on your purchase of an Elo TouchSystems Entuitive Touchcomputer. This manual is to help you operate and maintain the Touchcomputer. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. See Appendix B for more information on touchmonitor safety. About the Product Your LCD Desktop Touchcomputer is a 15" XGA TFT color display with the following features: The Tou
ページ7に含まれる内容の要旨
mouse and an on screen keyboard to take the place of an external keyboard. The Touchcomputer provides the following options. Operating System A selection of operating systems can be made between Windows CE.Net Ver4.2, Windows XP Pro or Windows 2000 Pro. Windows XP Pro and 2000 Pro When Windows XP Pro and Windows 2000 Pro are selected, the Touchcomputer will have a 20 GB or greater hard drive and 256 MB of SDRAM. The Touchcomputer will boot from the hard drive, which contains the operating
ページ8に含まれる内容の要旨
External Connections and Upgrades The following drawing shows the Touchcomputer External connector panel. This panel of connectors is used by the user to make external connections to the Touchcomputer. No external connections, other than power, are needed for the Touchcomputer to operate. External Connections Using these external connections, the following capabilities can be provided to the Touchcomputer by the user: Wireless Network Capabilities Wireless network capabilities can be provid
ページ9に含まれる内容の要旨
Keyboard • A keyboard can be added using the keyboard port. Upgrades and Changes A laptop type hard drive (2.5") can be added internally to the CE version of the Touchcomputer. • SDRAM can be increased from the standard 256 M to 512 M • Compact Flash can be added (through the compact flash door in the back of the Touchcomputer) to the Touchcomputer on Windows XP Pro and Windows 2000 Pro Touchcomputers. • Customer Displays and Magnetic Stripe Readers can added to any Touchcomputer. • Operatin
ページ10に含まれる内容の要旨
• US Power Cable • European Power Cable •Power Brick • Applicable Operating System CD • Windows 2000 Pro • Windows XP Pro • No CD is provided for Windows CE.Net Ver4.2 (but the image is on the Touchcomputer CD.) • No serial or USB cables are provided 1-5
ページ11に含まれる内容の要旨
Models The Touchcomputer is available in the following models. A key at the end of the model list explains the options. E08919-000 ESY1525L-7UWA-1-CE F00839-000 ESY1525L-7UWA-1-CE-C1 C63175-000 ESY1525L-8UWA-1-CE E73369-000 ESY1525L-8UWA-1-CE-M3 E36798-000 ESY1525L-8UWA-1-CE-C1 A78783-000 ESY1525L-8UWA-1-CE-M3C1 C32392-000 ESY1525L-7UWA-1-XP A82367-000 ESY1525L-7UWA-1-XP-C1 D37281-000 ESY1525L-8UWA-1-XP D58125-000 ESY1525L-8UWA-1-XP-M2 D61906-000 ESY1525L-8UWA-1-XP-M3 C94408-000 ESY1525L-8UWA-1
ページ12に含まれる内容の要旨
Key PIP Description Key ESY = Elo System 15 = 15 Inch Display 25 = Desktop cabinetry (In grey plastics only) L = LCD 7 = AccuTouch 8 = IntelliTouch S = Serial controller U = USB controller W = Worldwide agencies A = Revision number 1 = Antiglare glass Mx = MSR unit x = 2 = MSR USB HID x = 3 = MSR USB Keyboard Emulation Cx = Customer Display x = 1 = Serial Customer Display CE = Windows CE.Net 4.2 Pro+ Xp = Windows Xp Pro 2K = Windows 2000 Pro 1-7
ページ13に含まれる内容の要旨
1-8 Elo Entuitive Touchmonitor User Guide
ページ14に含まれる内容の要旨
C HAPT ER CTouchcomputer HAP T ER 2 SETUP Initial Turn On and Software Registration Touchcomputer Operating System Setup The initial setup of the Windows operating system takes approximately 5-10 minutes. Additional time may be needed depending on computers hardware configuration and connected devices. To setup the Windows OS for you computer, turn on your computer and follow the instructions on the screen. The Touchcomputer should be connected to a network providing an internet connection
ページ15に含まれる内容の要旨
Computer Reboots • Wait for computer to reboot and finally boot up to the desktop. Testing Pre-installed Devices Touchcomputer come pre installed with several different hardware options. To test these options, click on the following icons on the Windows toolbar on the bottom right of the computer. You may also use the desktop icons. Customer Display Testing • Click on the “CD” icon. • The customer display should change, now displaying the text “Elo TouchSystems Customer Display”. Keyboard Car
ページ16に含まれる内容の要旨
Touchcomputer Controls Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Power To turn power off, press and hold switch 5. To turn on press and hold switch 5 then shut down. To do a hard shutdown, press and hold switch 5. To turn power on, press the power button once. 2-11
ページ17に含まれる内容の要旨
Power and OSD Lock Out Normally the 5 switches on the side of the monitor depicted in the figure in the controls section control power, brightness and volume. The power switch can be made not to operate by activating the power lockout function. The brightness and volume adjustment can be made not to operate by activing the OSD lockout function. The OSD lockout function can be a activate by simultaneously pressing Switch 1 and Switch 2. The power lockout function can be activated by simultaneous
ページ18に含まれる内容の要旨
C HAPT ER C HAP T ER 3SAFETY/SERVICING THE Touchcomputer When servicing the computer perform the following: • Perform an orderly shutdown using the operating system menu. • Shut down the Touchcomputer and remove all external cables. • When opening the Touchcomputer, periodically touch any metal parts of the Touchcomputer, such as metal portions of the case or connector shells on the monitor. • Handle components and cards with care. Do not touch components on the cards. When adding memory, hol
ページ19に含まれる内容の要旨
3-14 Elo Entuitive Touchmonitor User Guide
ページ20に含まれる内容の要旨
C HAPT ER C HAPT ER 4TECHNICAL DESCRIPTION Block Diagram The block diagram of the Touchcomputer is shown below: Elo Touchcomputer Block Diagram Dual USB USB1 Port(500 ma) CN7 Speakers Dual USB USB2 Port(500 ma) LCD CN13 Serial Port CN14 Serial Port PS2 Inveter J16 OSD keyboard Optional Optional Switch PS2 J17 Hard Drive Compact Flash panel keyboard J12 PCMCIA Ethemet J15 Port CN10 J11 CN11 J7 CN5 +12 Mother board VDC CN1 CN9 CN3 CN2 CN4 CN6 Internal Internal Serial USB +5 VDC Serial +5/+12vdc US
