ページ1に含まれる内容の要旨
Table of Contents
1. PRECAUTIONS FOR USE ................................................................... 36
2. DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY ........... 37
3. SAFETY PRECAUTIONS ..................................................................... 38
4. GET TO KNOW YOUR OVEN.............................................................. 39
5. BEFORE INSTALLATION..................................................................... 39
6. DESCRIPTION OF FRONT PANEL CONTROLS ....
ページ2に含まれる内容の要旨
Precautions for Use 1. PRECAUTIONS FOR USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. TAKE GOOD CARE OF IT AND KEEP IT TO HAND THROUGHOUT THE OVEN'S LIFE CYCLE. WE URGE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE APPLIANCE. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED STAFF IN COMPLIANCE WITH THE RELEVANT REGULATIONS. THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE AND COMPLIES WITH THE EEC DIRECTIVES CURRENTLY IN FORCE. THE APPLIANCE IS BUILT TO
ページ3に含まれる内容の要旨
Disposal instructions 2.DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY Our products are only packaged using non-pollutant, environment-friendly, recyclable materials. We urge you to cooperate by disposing of the packaging properly. Contact your local dealer or the competent local organisations for the addresses of collection, recycling and disposal facilities. Never leave all or part of the packaging lying around. Packaging parts, and especially plastic bags, may represent a suffocation hazard f
ページ4に含まれる内容の要旨
Safety precautions 3. SAFETY PRECAUTIONS REFER TO THE INSTALLATION INSTRUCTIONS FOR THE SAFETY REGULATIONS FOR ELECTRIC OR GAS APPLIANCES AND VENTILATION FUNCTIONS. IN YOUR INTEREST AND TO ENSURE YOUR SAFETY, BY LAW ALL ELECTRIC APPLIANCES MUST ONLY BE INSTALLED AND SERVICED BY QUALIFIED STAFF, IN ACCORDANCE WITH THE RELEVANT REGULATIONS. OUR APPROVED INSTALLATION ENGINEERS GUARANTEE YOU A JOB WELL DONE. GAS OR ELECTRIC APPLIANCES MUST ALWAYS BE DISCONNECTED BY SUITABLY SKILLED PEOPLE. THE PLUG
ページ5に含まれる内容の要旨
Instructions for the User 4. GET TO KNOW YOUR OVEN CONTROL PANEL OVEN LIGHT OVEN FAN SHELF AND TRAY RUNNERS TEMPERATURE SENSOR ROOF LINER BOTTOM PLATE (ON SOME MODELS ONLY) PIZZA PLATE / COVER RECESS (ON SOME MODELS ONLY) 5. BEFORE INSTALLATION Never leave packaging residues unattended in the home. Separate waste packaging materials by type and consign them to the nearest separate disposal centre. The inside of the appliance should be cleaned to remove all manufacturing residues. For further inf
ページ6に含まれる内容の要旨
Instructions for the User 6. DESCRIPTION OF FRONT PANEL CONTROLS All the appliance's control and monitoring devices are placed together on the front panel. The table below provides the key to the symbols used. THERMOSTAT-TIMER KNOB PT1 This knob allows you to set the time, select the cooking temperature and duration and program the cooking start and end times. From now on, for convenience it will be referred to as PT1. For instructions on how to use it correctly, see point «7.3 First use» and
ページ7に含まれる内容の要旨
Instructions for the User FUNCTION-SWITCH ON KNOB PT2 This knob allows access to the oven's three operating modes, and is also used to select a cooking function (see point «7.2 Operating modes»). From now on, for convenience it will be referred to as PT2. The table below provides a short description of the functions available. GRILL ELEMENT IN OPERATION PIZZA FUNCTION (ON SOME ALTERNATING WITH BOTTOM MODELS ONLY) HEATING ELEMENT + FAN TOP + BOTTOM HEATING ROUND HEATING ELEMENT ELEMENTS GRILL E
ページ8に含まれる内容の要旨
Instructions for the User 7. USING THE OVEN 7.1 Precautions and General Advice All cooking operations must be carried out with the door closed When the oven and grill are used for the first time, they should be heated to the maximum temperature for long enough to burn off any oily residues left by the manufacturing process, which might contaminate foods with unpleasant smells. During cooking, do not cover the bottom of the oven with aluminium or tin foil, and do not place pans or trays on it; th
ページ9に含まれる内容の要旨
Instructions for the User 7.3 First use At first use, or after a power failure, the oven's left hand-display, DSP1, will show a flashing symbol. To start any cooking operation, the current time must be set. 7.3.1 Setting the current time To set the current time, turn PT1 to the right and left to increase or decrease the hours. Press it once to move on to setting the minutes. Turn it the right and left to increase or decrease the minutes and press it to set the current time. The symbol will app
ページ10に含まれる内容の要旨
Instructions for the User 7.5 Programmed cooking procedures 7.5.1 Timed cooking with timer From ON status (see point «7.2 Operating modes»), press PT1 once. The display will show the figures (constantly on) and the symbol (flashing). Turn PT1 to set the minutes of cooking (from 00:01 to 23:59). A few seconds after the required duration is set, the symbol will stop flashing, and the countdown will start from that moment. Now select the cooking function required and wait for the buzzer to sound
ページ11に含まれる内容の要旨
Instructions for the User Select a cooking function (see point «7.4 Selecting the function») and press PT1 twice. The display will show the figures and the symbol (flashing). Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to 23:59). A few seconds after the required duration is set, the symbol will stop flashing, and semiautomatic cooking will start from that moment. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 onc
ページ12に含まれる内容の要旨
Instructions for the User After setting the duration, press PT1 once. The symbol and the current time will appear on the display. Turning PT1 to the right increases the time, allowing the cooking start time required to be set. A few seconds after the required duration is set, the and symbols will stop flashing, and the oven will start to wait for the starting time set. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 once to deactivate it. If
ページ13に含まれる内容の要旨
Instructions for the User 7.6.1 Child safety lock-out function With the oven in OFF status (see point «7.2 Operating modes») keep PT1 pressed until the message OFF SHO appears on DSP1. Now press PT1 until the message «OFF BLOC» appears on DPS1. Turn PT1 to the right or left to activate (ON BLOC) or deactivate (OFF BLOC) this function, which locks out all the functions and knobs after 2 minutes of operation without any command from the user (when this system is active, the symbol appears on DPS2
ページ14に含まれる内容の要旨
Instructions for the User 7.7 Cooling fan system The appliance is equipped with a cooling system which comes into operation as soon as a cooking function starts. Operation of the fans generates a normal air flow which comes out above and underneath the door and may continue for a short time even after the oven is switched off. 7.8 Inside light The oven light comes on: � when the oven door is opend in standby status (point «7.2 Operating modes») or; � when the function knob is turned to any funct
ページ15に含まれる内容の要旨
Instructions for the User 8. USING THE PIZZA FUNCTION (ON SOME MODELS ONLY) This appliance is equipped with a function specially developed for cooking pizza. This function is identified by the symbol on the oven functions knob. To cook a pizza, proceed as described below. With the oven cold, remove the circular cover from the bottom of the oven (fig. 1) and fit the pizza plate in its place (Fig. 2). 1) 2) Press PT2 to switch the oven on, then use PT2 again to select the function. The displa
ページ16に含まれる内容の要旨
Instructions for the User 8.2 To save energy The pizza stone acts as a heat reservoir. This allows energy consumption to be reduced, especially in cooking operations requiring medium-long times. In these cases, simply switch the oven off 10-12 minutes before the end of the cooking time. The heat gradually emitted by the refractory stone will ensure that the cooking temperature is maintained. 50
ページ17に含まれる内容の要旨
Instructions for the User 9. ACCESSORIES AVAILABLE The oven is fitted with 4 runners for placing trays and shelves at different heights. Shelf: useful to support pans containing the food for cooking. Tray grid: for placing on top of a tray for cooking foods which may drip. Oven tray: useful for collecting fat from foods placed on the grid above. Baking tray: useful for cooking cakes, pizza and confectionery. Rotisserie frame (only some models only): supports the rotisserie rod (see page 54 for i
ページ18に含まれる内容の要旨
Instructions for the User 10. RECOMMENDED COOKING TABLES The oven must be preheated before all cooking operations. Do not place the foods inside the oven until the degrees Centigrade symbol on the display stops flashing and the beep has sounded to confirm that the set temperature has been reached. Cooking times, for meat in particular, vary depending on the food's thickness and quality and personal preference. All times are calculated with the oven preheated. CONVENTIONAL COOKING
ページ19に含まれる内容の要旨
Instructions for the User GRILLING RUNNER POSITION FROM TIME IN MINUTES THE BOTTOM 1ST SIDE 2ND SIDE PORK CUTLET 4 7 - 9 5 - 7 PORK FILLET 3 9 - 11 5 - 9 FILLET STEAK 3 9 - 11 9 - 11 SLICED LIVER 4 2 - 3 2 - 3 VEAL ESCALOPES 4 7 - 9 5 - 7 HALF CHICKEN 3 9 - 14 9 - 11 SAUSAGE 3 7 - 9 5 - 6 MEATBALLS 3 7 - 9 5 - 6 FISH FILLET 3 5 - 6 3 - 4 TOASTED SANDWICHES 3 2 - 4 2 - 3 HOT AIR COOKING RUNNER POSITION FROM TEMPERATURE TIME IN MINUTES THE BOTTOM °C. PAS
ページ20に含まれる内容の要旨
Instructions for the User ROTISSERIE COOKING (ON SOME MODELS ONLY) Prepare the rotisserie rod with the food, tightening the screws A of the prongs. Fit the frame B onto the second runners from the bottom. Remove the handle D and position the rotisserie rod so that the pulley E is still in the guides on the frame B. Push the frame B fully in until the tip of the rotisserie rod enters the hole C on the rear wall of the oven. Place a basin F on the bottom bottom shelf and pour a little water into
