ページ1に含まれる内容の要旨
43-3908.fm Page 1 Thursday, December 19, 2002 3:12 PM
900MHz Hands-free Phone
with Headset Jack
43-3908
Lapel Clip lets you securely anchor the headsets cord
to your clothing to prevent the headset cord from pulling on
the headset, and to keep the cord out of the way.
10-Number Memory Dialing lets you store up to 10
numbers (1 one-touch and 9 speed-dial) in memory for
easy dialing.
20 Channels you can automatically select a clear
channel when you make or answer a call, or you can
ページ2に含まれる内容の要旨
Important Safety Instructions 43-3908.fm Page 2 Thursday, December 19, 2002 3:12 PM WARNING: To reduce the risk of fire or shock hazard, do IMPORTANT SAFETY not expose this product to rain or moisture. INSTRUCTIONS ..CAUTION.. RISK OF ELECTRIC SHOCK ! DO NOT OPEN When using your telephone equipment, basic safety CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, precautions should always be followed to reduce the risk of DO NOT REMOVE COVER OR BACK. NO USER- SERVICEABLE PARTS INSIDE. REFER
ページ3に含まれる内容の要旨
43-3908.fm Page 3 Thursday, December 19, 2002 3:12 PM 15. Never push objects of any kind into this product through CONTENTS cabinet slots as they may touch dangerous voltage Important Safety Instructions ..... 2 points or short out parts that could result in a risk of fire Introduction ................................ 4 or electric shock. Never spill liquid of any kind on the Installation .................................. 4 product. Connecting and Charging the 16. To reduce the risk of
ページ4に含まれる内容の要旨
Introduction 43-3908.fm Page 4 Thursday, December 19, 2002 3:12 PM 4. Exercise care in handling the battery pack in order not IMPORTANT ! ! to short it with conducting materials such as rings, bracelets, and keys. The battery or conductor may Cordless phones such as this one require AC power to overheat and cause burns. operate. When the power is off, you cannot make or receive 5. Charge the battery pack provided or identified for use calls using your phone. To be with this produ
ページ5に含まれる内容の要旨
43-3908.fm Page 5 Thursday, December 19, 2002 3:12 PM and modular plug provided is Part 68 compliant for connecting to the telephone company network. Ô 1. Plug one end of the supplied long modular cord into the TEL LINE jack on the bottom of the base. 2. Plug the other end of the modular cord into a modular phone line jack. 3. Insert the supplied AC adapters barrel plug into the DC IN 9V jack on the bottom of the base and route the adapters cord through the strain relief slot on the b
ページ6に含まれる内容の要旨
Installation 43-3908.fm Page 6 Thursday, December 19, 2002 3:12 PM and you might hear an error tone. Return the handset to the base for about 3 seconds to reset the security access-protection code. If the battery pack becomes weak during a call, the handset beeps every 3 seconds and TALK/BATT flashes. When this happens, recharge the battery pack. If TALK/BATT does not light and the phone does not work, recharge the battery pack. (The battery power might be too low to light TALK/BATT
ページ7に含まれる内容の要旨
43-3908.fm Page 7 Thursday, December 19, 2002 3:12 PM If desired, use the lapel clip on the headset cord to attach the cord to your clothing. Leave enough slack in the cord so you can move your head without pulling the headset. Ô NOTE Ô ATTACHING THE HEADSET HOLDER Setting the Dialing Mode Insert the tabs on the headset holder into the slots on the back of the base and snap If your phone system requires the holder into place. that you dial an access code (9, for example) before you d
ページ8に含まれる内容の要旨
Operation 43-3908.fm Page 8 Thursday, December 19, 2002 3:12 PM SELECTING THE CHANNEL The phone scans 20 channels (frequency pairs used be- tween the base and the handset) and automatically selects a clear channel each time you make or receive a call. If you hear other conversations or you experience difficulty hearing the conversation, press CHANNEL to select a different channel. TALK/BATT flashes, followed by a brief pause as your phone searches for a clear channel. Ô ADJUSTING THE HEA
ページ9に含まれる内容の要旨
43-3908.fm Page 9 Thursday, December 19, 2002 3:12 PM STORING A NUMBER IN MEMORY 1. Lift the handset. Ô NOTE Ô 2. Press MEMORY. TALK/BATT blinks. Storing a Number in Memory 3. Enter the number and any tone and pause entries (see Using Tone Services on a Pulse Line on Page 8 and An error tone sounds and the Entering a Pause on Page 9). Ô phone exits the programming mode if you wait more than 30 4. Press MEMORY again, then enter the memory location seconds between keypresses. numb
ページ10に含まれる内容の要旨
Troubleshooting 43-3908.fm Page 10 Thursday, December 19, 2002 3:12 PM TROUBLESHOOTING Problem Suggestions Low volume or Someone has picked up another phone on unusual sounds. the same line. Hang up the other phone. Make sure the headsets plug is properly connected to the jack. Severe noise inter- Keep the handset away from computers, ference. remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appli- ances. Move to anot
ページ11に含まれる内容の要旨
43-3908.fm Page 11 Thursday, December 19, 2002 3:12 PM If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take the phone to your local RadioShack store for assistance. CARE Keep the phone dry; if it gets wet, wipe it dry immediately. Use and store the phone only in normal temperature environments. Handle the phone carefully; do not drop it. Keep the phone away f
ページ12に含まれる内容の要旨
43-3908.fm Page 12 Thursday, December 19, 2002 3:12 PM rural areas), your telephones might not ring. If ringer Limited One-Year Warranty operation is impaired, remove a device from the line. This product is warranted by RadioShack against man- ufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase In the unlikely event that your phone causes problems on from RadioShack company-owned stores and autho- the phone line, the phone company can t
