ページ1に含まれる内容の要旨
New Zealand
Australia
PAGE 1 OF 8
P/N 545854C
DATE OF ISSUE
11 / 2003
INSTALLATION INFORMATION
TITAN BUILT - IN OVENS
OS301 / OD301 SERIES
IMPORTANT - SAVE FOR THE OVEN INSTALLER’S USE
BEFORE YOU START
PAGE 2 OF 8
It is the customers responsibility to ensure that the product is electrically
connected by a qualified electrical installer and conforms with all local electrical codes.
Failure to install the product correctly could invalidate any warranty or liability claims and lead to prosecuti
ページ2に含まれる内容の要旨
New Zealand Australia PAGE 1 OF 8 P/N 545854C DATE OF ISSUE 11 / 2003 INSTALLATION INFORMATION TITAN BUILT - IN OVENS OS301 / OD301 SERIES IMPORTANT - SAVE FOR THE OVEN INSTALLER’S USE BEFORE YOU START PAGE 2 OF 8 It is the customers responsibility to ensure that the product is electrically connected by a qualified electrical installer and conforms with all local electrical codes. Failure to install the product correctly could invalidate any warranty or liability claims and lead to prosecuti
ページ3に含まれる内容の要旨
724mm Inside Cabinet Width 762mm Recess Width 724mm Inside Cabinet Width 20mm Recess PRODUCT DIMENSIONS PAGE 3 OF 8 718mm 718mm OS301 OD301 757mm 757mm PROUD DIMENSIONS RECESSED DIMENSIONS PAGE 4 OF 8 TOP VIEW TOP VIEW Minimum Distance Minimum Distance Under Benchtop Under Benchtop for Single ovens for Single 70mm 70mm 575mm Inside Cabinet Depth 595mm Inside Cabinet Depth Ove n Door 550mm 681mm - Single 1222mm - Double Inside Cabinet Height 688mm 570mm 675mm Oven Door 550mm 693mm - Single 1235mm
ページ4に含まれる内容の要旨
724mm Inside Cabinet Width 762mm Recess Width 724mm Inside Cabinet Width 20mm Recess PRODUCT DIMENSIONS PAGE 3 OF 8 718mm 718mm OS301 OD301 757mm 757mm PROUD DIMENSIONS RECESSED DIMENSIONS PAGE 4 OF 8 TOP VIEW TOP VIEW Minimum Distance Minimum Distance Under Benchtop Under Benchtop for Single ovens for Single 70mm 70mm 575mm Inside Cabinet Depth 595mm Inside Cabinet Depth Ove n Door 550mm 681mm - Single 1222mm - Double Inside Cabinet Height 688mm 570mm 675mm Oven Door 550mm 693mm - Single 1235mm
ページ5に含まれる内容の要旨
PREPARING THE OVEN PAGE 5 OF 8 UNPACKING THE OVEN FLUSH FITTING INSTALLATION OPTIONS Do not use door handles or any part of the control panel for lifting the product. Before the product is lifted, the oven doors and racks are to be removed. a WARNING : Extreme care is to be taken when lifting the product as it is very heavy. Failure to do so may result in injury. 20 mm 1. Carefully lay the product on its back. Remove the external wrapping and the bottom polystyrene protector and pallet. Sta
ページ6に含まれる内容の要旨
PREPARING THE OVEN PAGE 5 OF 8 UNPACKING THE OVEN FLUSH FITTING INSTALLATION OPTIONS Do not use door handles or any part of the control panel for lifting the product. Before the product is lifted, the oven doors and racks are to be removed. a WARNING : Extreme care is to be taken when lifting the product as it is very heavy. Failure to do so may result in injury. 20 mm 1. Carefully lay the product on its back. Remove the external wrapping and the bottom polystyrene protector and pallet. Sta
ページ7に含まれる内容の要旨
ATTACHMENT PAGE 7 OF 8 WARNING : Extreme care is to be taken when lifting the product as it is very heavy. Failure to do so may result in injury. 1. Slide the product into the oven cabinet, pushing the product between the two oven cavities or by the edges of the oven cavity. If the product does not sit flush with the front of the oven cabinet, make certain that the electrical supply cable has not jammed behind the product. Ensure the bottom vent is not blocked off or damaged. screw screw screw
ページ8に含まれる内容の要旨
ATTACHMENT PAGE 7 OF 8 WARNING : Extreme care is to be taken when lifting the product as it is very heavy. Failure to do so may result in injury. 1. Slide the product into the oven cabinet, pushing the product between the two oven cavities or by the edges of the oven cavity. If the product does not sit flush with the front of the oven cabinet, make certain that the electrical supply cable has not jammed behind the product. Ensure the bottom vent is not blocked off or damaged. screw screw screw