ページ1に含まれる内容の要旨
ADSL Modem with
Wireless G Router
Designed to Meet ADSL2+ Specification
Network your computers and
Share
share your ADSL Internet access
Mbps
802.11g 802.11g 2.4GHz • Wir 2.4GHz • Wireless
User User Manual Manual
F5D7632uk4v3000
Mbps
802.11b 2.4GHz • Wireless
Wired
Ethernet
E
Ethernet
10/100 Mbps
Wired
Gigabit Ethernet
E
Gigabit Mbps
10/100/1000
ページ2に含まれる内容の要旨
Table of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Benefits of a Home Network . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Advantages of a Belkin Wireless Network. . . . . . . . . . . . . . . . . 5 2 Make Sure You Have the Following . . . . . . . . . . . . . . . . . . . . . . . 6 Package Contents . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
section Introduction Thank you for purchasing the Belkin ADSL Modem with Wireless G 1 Router (the Router). In minutes you will be able to share your Internet connection and network your computers with your new Router. 2 The following is a list of features that make your Router an ideal solution for your home or small office network. Please be sure to read through this User Manual completely, and pay special attention to 3 Appendix B entitled “Important Factors for Placement and Setup”. 4
ページ4に含まれる内容の要旨
Introduction Integrated 802.11g Wireless Access Point 802.11g is an exciting new wireless technology that achieves data rates up to 54Mbps, nearly five times faster than 802.11b. Built-In Dynamic Host Configuration Protocol (DHCP) Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network. The DHCP server will assign IP addresses to each computer automatically so there is no need for a complicated networking setup. NAT IP Address Sha
ページ5に含まれる内容の要旨
section Introduction 1 Benefits of a Home Network By following our simple setup instructions, you will be able to use your 2 Belkin home network to: • Share one high-speed Internet connection with all the computers in 3 your home • Share resources, such as files, and hard drives among all the connected computers in your home 4 • Share a single printer with the entire family • Share documents, music, video, and digital pictures 5 • Store, retrieve, and copy files from one computer to another
ページ6に含まれる内容の要旨
Make Sure You Have the Following Package Contents • ADSL Modem with Wireless G Router • RJ11 Telephone Cord - Gray • RJ45 Ethernet Networking Cable — Yellow • USB 1.0 Cable — Blue • ADSL Microfilter* • Power Adapter • User Manual CD *ADSL microfilter varies by country. If it’s not included, you will need to purchase one. System Requirements • An active ADSL service with a telephone wall jack for connecting the Router • At least one computer with a Network Interface Card (NIC) and Internet br
ページ7に含まれる内容の要旨
section Knowing your Router 1 The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The LED indicators are easily visible on the front of the Router to provide you with 2 information about network activity and status. 3 Front Panel 4 The illustration shows the front panel of the 5 Router: 6 7 1. Power LED Power LED LAN Status LED ADSL LED Internet LED (1-4) When you apply Wireless LAN (WLAN) 8 St
ページ8に含まれる内容の要旨
Knowing your Router 3. WLAN Status LED The WLAN Status LED is solid GREEN when you enable the wireless LAN function. It flashes when the Router is transmitting or receiving data wirelessly. OFF WLAN is off �� �� ��� ��� � � ��� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Green WLAN is up and connected WLAN Green When transmitting or receiving data blinking 4. ADSL LED The ADSL LED flashes GREEN during negotiation with your ISP. It stays GREEN when the Ro
ページ9に含まれる内容の要旨
section Knowing your Router 1 Back Panel The following figure illustrates the rear panel of your Router. 2 (7) (8) (9) (6) 3 4 5 6. DSL Line 6 This port is for connection to your ADSL line. Connect your ADSL line to this port. 7 7. Power Plug Connect the included 15V DC power supply to this inlet. Using the 8 wrong type of power adapter may cause damage to your Router. 8. Reset Button The “Reset” button is used in rare cases when the Router may function 9 improperly. Resetting the Router wi
ページ10に含まれる内容の要旨
Connecting your Router Positioning your Router Your wireless connection will be stronger the closer your computer is to your Router. Typical indoor operating range for your wireless devices is between 100 and 200 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your Router connected devices increases. This may or may not be noticeable to you. As you move farther from your Router, connection speed may decrease. Factors that can we
ページ11に含まれる内容の要旨
section Connecting your Router 1 Connecting your ADSL Line 2 Connection for the Router to the ADSL line varies by country and region. Typically it involves a microfilter or a microfilter with built-in splitter to allow simultaneous use of ADSL service and telephone service on the same telephone 3 line. Please read the following steps carefully and select appropriate method. 4 1. If your telephone service and ADSL service are on the same telephone line, ADSL microfilters are needed for each
ページ12に含まれる内容の要旨
Connecting your Router 3. If you have a dedicated ADSL service telephone line with an RJ11 wall jack, simply connect a telephone cord from the wall jack to the gray RJ11 port labeled “DSL line” on the back of your Router. 4. If you have an RJ45 wall jack for your ADSL service, connect an RJ45- to-RJ11 converter to the wall jack. Then connect one end of a telephone cord to the converter and the other end to the gray RJ11 port labeled “DSL line” on the back of your Router. Note: ADSL microfi
ページ13に含まれる内容の要旨
section Connecting your Router 1 2 3 4 3. Turn on your computers. After your computers boot up, the LAN status LED on the front of the Router will be on for each port to which a 5 wired computer is connected. These lights show you the connection and activity status. Now you are ready to configure the Router for ADSL connection. 6 Running the Setup Wizard 7 1. You can access the web-based management user interface of the Router using the Internet browser on a computer connected to the 8 Ro
ページ14に含まれる内容の要旨
C Co on nn ne ec ct ti in ng g y yo ou ur r R Ro ou ut te er r 3. The Setup Wizard will start automatically for express configuration (recommended) Click “Next” to continue. 4. The first step is to select your country and ISP, and click “Next”. If your country and/or ISP is not listed, select “Other Country” or “Other ISP.” 5. Then select your connection type, PPPoE, PPPoA, or other types. For the “PPPoE” or “PPPoA” you will see the following screen (opposite page). Enter the required val
ページ15に含まれる内容の要旨
section Connecting your Router 1 2 3 4 5 6 7 8 6. Now the Wireless LAN Setup screen will show. You can connect 9 to the Router via a wireless-LAN-enabled computer with the following default wireless LAN settings: 10 SSID = Belkin54g Wireless Channel = Auto Security = off Note: Belkin strongly recommends that you enable wireless security to WEP or WPA and change SSID to something of your own. Please read the User Manual for details on levels of wireless security and how to change your securi
ページ16に含まれる内容の要旨
Connecting your Router 7. Double-check the settings shown on the following screen. You can click “Back” to change the settings or click “Next” to confirm Note: You can always restart the Setup Wizard or use the Navigation Menu on the left to change your setting. 8. Congratulations! You have finished installing your new Belkin Router. Click “OK” to activate your settings. To test your Internet connection, open your browser and visit any website, such as www.belkin.com. For advanced features
ページ17に含まれる内容の要旨
section Manually Configuring your Router Understanding the Web-Based User Interface 1 The home page shows you a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page. 2 1. Quick-Navigation Links You can go directly to any of the Router’s UI pages by clicking directly on these links. The links are divided into logical categories and grouped 3 by tabs to make finding a particular setting easier to find. Clicking on the header of each tab will s
ページ18に含まれる内容の要旨
Manually Configuring your Router 4. Login/Logout Button This button enables you to log in and out of the Router with the press of one button. When you are logged into the Router, this button will change to read “Logout”. Logging into the Router will take you to a separate login page where you will need to enter a password. When you are logged into the Router, you can make changes to the settings. When you are finished making changes, you can log out of the Router by clicking the “Logout”
ページ19に含まれる内容の要旨
section Manually Configuring your Router 1 Changing LAN Settings All settings for the internal LAN setup of the Router can be viewed and 2 changed here. LAN Settings 3 Clicking on the header of the LAN tab (A) will take you to the LAN tab’s header page. A quick description of the functions can 4 be found here. To view the settings or make changes to any of the LAN settings, click on “LAN Settings” (B) or to view the list of connected computers, click on “DHCP Client List” (C). 5 6 7 8 9 10
ページ20に含まれる内容の要旨
Manually Configuring your Router 3. DHCP Server The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically. The default setting is “On”. The DHCP server can be turned OFF if necessary, however, in order to do so you must manually set a static IP address for each computer on your network. To turn off the DHCP server, select “Off” and click “Apply Changes”. 4. IP Pool The IP Pool is the range of IP addresses set
