ページ1に含まれる内容の要旨
GT701C
High Speed
Internet
DSL Modem
User’s
Manual
ページ2に含まれる内容の要旨
Table of Contents 1 Introduction 1 Minimum System Requirements 1 Features 2 Getting to Know the Modem 3 2 Performing a Quick Setup 7 Accessing Quick Setup Screens 7 Changing the Password
ページ3に含まれる内容の要旨
DSL Modem User Manual 6 Configuring Parental Controls 45 Accessing Parental Control Screens 45 Services Blocking 47 Website Blocking 48 Schedule Rules 48 7 Configuring the Modem’s Utilities 51 Accessing the Utilities Screens
ページ4に含まれる内容の要旨
Introduction 1 Thank you for purchasing the High Speed Internet DSL Modem. The Modem is the simplest way to connect computers to a high-speed broadband connec- tion. This easy-to-use product is perfect for the home office or small business. If you want to take your computing to the next level, the High Speed Internet DSL Modem is sure to be one of the keys to your success. Minimum System Requirements s Active DSL service s Computer with an 10 MBPS or 10/100 MBPS Ethernet connection, or USB
ページ5に含まれる内容の要旨
DSL Modem User Manual Chapter 1 Introduction Features s Plug-and-Play installation support for computers running Windows oper- ating systems (98SE, Me, 2000, XP, and Vista) for USB connections only. s ADSL WAN port (RJ-11) s Full-rate ANSI T1.413 Issue 2, ITU G.992.1(G.dmt) and G.992.2(G.lite) standard compliance s Auto-handshake for different ADSL services s USB 1.1 device specification compliance s 12 Mbps USB data rate (full speed) support s Precise ATM traffic shaping s IP packet routing
ページ6に含まれる内容の要旨
DSL Modem User Manual Chapter 1 Introduction Getting to Know the Modem This section contains a quick description of the Modem’s lights, ports, etc. The Modem has several indicator lights (LEDs) on its front panel and a series of ports on its rear panel. Front Panel The front panel of the Modem features five lights (LEDs): Power, DSL, Internet, Ethernet, and USB. Power Light The Power light displays the Modem’s current status. If the Power light glows steadily green, the Modem is receiving po
ページ7に含まれる内容の要旨
DSL Modem User Manual Chapter 1 Introduction Internet Light The Internet light glows green when connected to the ISP. It may blink while sending or receiving data. Ethernet Light The Ethernet light illuminates when the Modem is connected to a computer via its yellow Ethernet port, using an Ethernet cable. USB Light The USB light illuminates when the Modem is connected to a computer via its USB port, using a USB cable. Rear Panel The rear panel of the Modem contains four ports (DSL, USB, Et
ページ8に含まれる内容の要旨
DSL Modem User Manual Chapter 1 Introduction Ethernet Port The Ethernet port is used to connect computers to the Modem via Ethernet cable. The Ethernet port is a 10/100 Mbps auto-sensing port, and either a straight- through or crossover Ethernet cable can be used when connecting to the port. Note: Use a crossover Ethernet cable to connect the Modem ☞ only if connecting to a hub/switch that lacks an uplink port. Reset Switch Depressing the Reset switch restores the Modem’s factory default se
ページ9に含まれる内容の要旨
DSL Modem User Manual This page left intentionally blank. 6
ページ10に含まれる内容の要旨
Performing a Quick Setup 2 This chapter is a guide through a quick set up of the Modem, including how to connect the Modem to the ISP. To complete the quick setup, have the Welcome Letter or ISP Worksheet handy. If the document is not available, contact the ISP immediately. Accessing Quick Setup Screens To access the Quick Setup screens: 1. Open a Web browser. In the “Address” text box, type: http://192.168.1.1 then press Enter on the keyboard. 7
ページ11に含まれる内容の要旨
DSL Modem User Manual Chapter 2 Performing a Quick Setup 2. The “Home” screen appears. Click Quick Setup. 3. A login window appears. Enter the user name and password in the appropri- ate text boxes, then click OK. Firefox: 8 9
ページ12に含まれる内容の要旨
DSL Modem User Manual Chapter 2 Performing a Quick Setup Internet Explorer: Note: The default user name is “admin.” The default password is ☞ “password.” 4. Follow the instructions in the “Welcome to the Quick Setup” screen, then click Next. 5. At the top of the next window, select PPPoE or DHCP. 5a. If PPPoE was selected in step 5, the default user name and password are entered in the appropriate text boxes. If “DHCP” was selected, go to step 6. 8 9
ページ13に含まれる内容の要旨
DSL Modem User Manual Chapter 2 Performing a Quick Setup 5b. If PPPoE was selected in step 5, select the IP type (“Dynamic IP-DHCP [Default]” or “Single Static IP Address”). If Single Static IP Address was select- ed, enter the address in the appropriate text box. 6. Optional - Select the DNS type (“Dynamic DNS Addresses [Default]” or “Static DNS Addresses”). If Static DNS Addresses was selected, enter the pri- mary and secondary DNS addresses in the appropriate text boxes. If unsure what
ページ14に含まれる内容の要旨
DSL Modem User Manual Chapter 2 Performing a Quick Setup 3. The “Change Admin Username/Password” screen appears. Enter a new Username in the “Admin User Name” text boxt, then enter a new password in the “Admin Password” text box. Make sure to write down the user name and password and keep it in a secure location. They will be needed to access the Modem’s Web Configuration screens in the future. 4. Click Apply at the bottom of the screen. 5. Read the instructions on the next screen. The user
ページ15に含まれる内容の要旨
DSL Modem User Manual This page left intentionally blank. 12
ページ16に含まれる内容の要旨
Viewing the Modem’s Status 3 After configuring the Modem, the Modem’s connection and network status can be viewed. The Internet connection status is viewed in the “Broadband Connection Status” screen, while the network status is viewed in the “My Network” screen. Broadband Connection Status To view the Modem’s connection statistics, select Status in the Home screen. The “Broadband Connection Status” screen appears. There are three sections in this screen: General Statistics, PPP Status, a
ページ17に含まれる内容の要旨
DSL Modem User Manual Chapter 3 Viewing the Modem’s Status PPP Status The middle section of the Broadband Connection Status screen displays the status of the Modem’s PPP connection, including user name, authentication failures, and packets sent and received. DSL Status The bottom section of the Broadband Connection Status screen displays the status of the Modem’s DSL connection, including mode settings, connection status, and number of discarded packets. Click Reset to refresh all statistic
ページ18に含まれる内容の要旨
DSL Modem User Manual Chapter 3 Viewing the Modem’s Status In the menu on the left side of the Broadband Connection Status screen, there are two other options available to view: NAT Table and Routing Table. Click to gen- erate the option of choice. NAT Table Selecting NAT Table generates the “NAT Table” screen. This screen displays an overview of the current list of open connections through NAT (Network Address Translation) the Modem supports between the networked computers and the Internet
ページ19に含まれる内容の要旨
DSL Modem User Manual Network Status To view the Modem’s network status, select My Network from the strip of icons at the top of any GUI screen. The “My Network” screen appears, listing all devices connected to the network. From this screen, various settings can be accessed, including Website blocking, Schedule Rules, and Enable Application. To view the network status of a particular device, click View Device Details for the device. An overview of the device’s network status appears. 16
ページ20に含まれる内容の要旨
Configuring Advanced Settings # 4 This chapter explains how to configure the Modem’s advanced settings, such as remote management, DHCP settings, and Quality of Service (QoS). Accessing Advanced Setup Screens To access the Advanced Setup screens, follow these instructions: 1. Open a Web browser. In the “Address” text box, type: http://192.168.1.1 then press Enter on the keyboard. 17
