ページ1に含まれる内容の要旨
TL-WR940N
Wireless N Router
Rev: 1.1.0
1910010566
ページ2に含まれる内容の要旨
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES CO.,
ページ3に含まれる内容の要旨
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all per
ページ4に含まれる内容の要旨
Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be
ページ5に含まれる内容の要旨
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: Wireless N Router Model No.: TL-WR940N Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 1999/5/EC, Directives 2004/108/EC, Directives 2006/95/EC, Directives 1999/519/EC, Directives 2011/65/EU The above product is in conformity wi
ページ6に含まれる内容の要旨
CONTENTS Package Contents ....................................................................................................................................1 Chapter 1. Introduction..........................................................................................................................2 1.1 Overview of the Router .........................................................................................................2 1.2 Conventions .....................................
ページ7に含まれる内容の要旨
4.6.5 Wireless Statistics...................................................................................................45 4.7 DHCP ..................................................................................................................................46 4.7.1 DHCP Settings........................................................................................................46 4.7.2 DHCP Clients List ............................................................................
ページ8に含まれる内容の要旨
4.15.1 Comexe.cn DDNS ..................................................................................................78 4.15.2 Dyndns.org DDNS ..................................................................................................79 4.15.3 No-ip.com DDNS ....................................................................................................80 4.16 System Tools..........................................................................................................
ページ9に含まれる内容の要旨
TL-WR940N Wireless N Router Package Contents The following items should be found in your package: TL-WR940N Wireless N Router DC Power Adapter for TL-WR940N Wireless N Router Quick Installation Guide Resource CD for TL-WR940N Wireless N Router, including: • This Guide • Other Helpful Information Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact your distributor. -1-
ページ10に含まれる内容の要旨
TL-WR940N Wireless N Router Chapter 1. Introduction Thank you for choosing the TL-WR940N Wireless N Router. 1.1 Overview of the Router The TL-WR940N Wireless N Router integrates 4-port Switch, Firewall, NAT-Router and Wireless AP. The Wireless N Router delivers exceptional range and speed, which can fully meet the need of Small Office/Home Office (SOHO) networks and the users demanding higher networking performance. Incredible Speed The TL-WR940N Wireless N Router provides up to 30
ページ11に含まれる内容の要旨
TL-WR940N Wireless N Router 1.3 Main Features Complies with IEEE 802.11n to provide a wireless data rate of up to 300Mbps. One 10/100M Auto-Negotiation RJ45 WAN port, four 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX. Provides WPA/WPA2, WPA-PSK/WPA2-PSK authentication, TKIP/AES encryption security. Shares data and Internet access for users, supporting Dynamic IP/Static IP/PPPoE Internet access. Supports Virtual Server, Special Application and DMZ host. Supp
ページ12に含まれる内容の要旨
TL-WR940N Wireless N Router Name Status Indication Off Power is off. PWR On Power is on. On The Router is initializing or maybe has a system error. SYS Flashing The Router is working properly. Off The Router has a system error. Off The Wireless function is disabled. WLAN Flashing The Wireless function is enabled. Off There is no device linked to the corresponding port. WAN, There is a device linked to the corresponding port but there is no On activity. LAN 1-4 Flashing There
ページ13に含まれる内容の要旨
TL-WR940N Wireless N Router RESET: There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the Router's Web-based Utility. 2) Use the Factory Default Reset button: Press the Reset button for five seconds and then wait for the Router to reboot. WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet. 1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(
ページ14に含まれる内容の要旨
TL-WR940N Wireless N Router Chapter 2. Connecting the Router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet.) PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP/IP protocol on each PC Web browser, such as Microsoft Internet Explorer 5.0 , Netscape Navigator 6.0 or above 2.2 Installation Environ
ページ15に含まれる内容の要旨
TL-WR940N Wireless N Router Figure 2-1 Hardware Installation of the TL-WR940N Wireless N Router -7-
ページ16に含まれる内容の要旨
TL-WR940N Wireless N Router Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your TL-WR940N Wireless N Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default domain name of the TL-WR940N Wireless N Router is http://tplinklogin.net, the default IP address is 192.168.0.1, and the default Subnet Mask is 255.255.255.0. These values can be changed as you desire. In this guide, we use all the default values f
ページ17に含まれる内容の要旨
TL-WR940N Wireless N Router Figure 3-1 Success result of Ping command If the result displayed is similar to the Figure 3-2, it means the connection between your PC and the Router is failed. Figure 3-2 Failure result of Ping command Please check the connection following these steps: 1. Is the connection between your PC and the Router correct? Note: The 1/2/3/4 LEDs of LAN ports which you link to on the Router and LEDs on your PC's adapter should be lit. -9-
ページ18に含まれる内容の要旨
TL-WR940N Wireless N Router 2. Is the TCP/IP configuration for your PC correct? Note: If the Router's IP address is 192.168.0.1, your PC's IP address must be within the range of 192.168.0.2 ~ 192.168.0.254. 3. Is the default LAN IP of the Router correct? Note: If the LAN IP of the modem connected with your router is 192.168.0.x, the default LAN IP of the Router will automatically switch from 192.168.0.1 to 192.168.1.1 to avoid IP conflict. Therefore, in order to verify the netwo
ページ19に含まれる内容の要旨
TL-WR940N Wireless N Router 2. After successfully login, you can click the Quick Setup to quickly configure your Router. Figure 3-5 Quick Setup 3. Click Next, and then WAN Connection Type page will appear, shown in Figure 3-6. Figure 3-6 Choose WAN Connection Type The Router provides Auto-Detect function and supports three popular ways PPPoE, Dynamic IP and Static IP to connect to the Internet. It’s recommended that you make use of the Auto-Detect function. If you are sure of wh
ページ20に含まれる内容の要旨
TL-WR940N Wireless N Router Figure 3-7 Quick Setup – PPPoE User Name and Password - Enter the User Name and Password provided by your ISP. These fields are case sensitive. If you have difficulty with this process, please contact your ISP. Confirm Password - Re-enter the password provided by your ISP to ensure the Password you entered is correct. If the Password is different from the Confirm Password, the screen will appear as shown below. Click OK, and re-enter the Password and C
