ページ1に含まれる内容の要旨
TD-W8910GB
54M Wireless ADSL2+ Router
Rev: 1.1.1
1910010013
ページ2に含まれる内容の要旨
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2008 TP-LINK TECHNOLOGIES CO.,
ページ3に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to rad
ページ4に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark General authorization required for outdoor use and Bulgaria public service Military Radiolocation use. Refarming of the 2.4 GHz Outdoor use limited to 10 band has been ongoing in recent years to allow current France mW e.i.r.p. within the band relaxed regulation. Full implementation planned 2012 2454-2483.5 MHz If used outside of own premises, general authoriz
ページ5に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Package Contents The following items should be found in your package: One TD-W8910GB 54M Wireless ADSL2+ Router One DC power Adapter for TD-W8910GB 54M Wireless ADSL2+ Router Quick Installation Guide One RJ45 cable Two RJ11 cables One ADSL splitter One Resource CD for TD-W8910GB 54M Wireless ADSL2+ Router, including: • This User Guide • Other Helpful Information Note: Make sure that the package contains the above items. If an
ページ6に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide CONTENTS Chapter 1. Product Overview.................................................................................. 1 1.1 Overview of the Router ............................................................................................. 1 1.2 Main Features ........................................................................................................... 1 1.3 Supporting Protocol...................................................
ページ7に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide 4.5.5 Wireless – Statistics .......................................................................................................62 4.6 Diagnostics.............................................................................................................. 62 4.7 Management ........................................................................................................... 63 4.7.1 Settings............................................
ページ8に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Chapter 1. Product Overview 1.1 Overview of the Router Thank you for choosing the TD-W8910GB 54M Wireless ADSL2+ Router. The Router is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet or 802.11g/802.11b wireless network. TD-W8910GB connects to an Ethernet LAN or computers via standard Ethernet ports. The ADSL connection is built by ordinary telephone line with standard connectors. Multiple wo
ページ9に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Adopts Advanced DMT modulation and demodulation technology. Supports bridge mode and Router function. Multi-user sharing a high-speed Internet connection Connecting the internet on demand and disconnecti ng from the Internet when idle for PPPoE. Supports access control, parents and network ad ministrators can establish restricted access policies based on time of day for children or staff. Provides WPA/WPA2, WPA-PSK/WPA2-PSK data secu
ページ10に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Chapter 2. Hardware Installation Guide 2.1 The Front Panel The Router’s LEDs are located on the front panel. Figure 2-1 The LED indicators on the front panel include the Power, System, ADSL, WLAN and 1-4 (LAN). The ADSL, WLAN and 1-4 (LAN) indicators monitor link status and activity (Link/Act). 2.2 LED Explanation Name Status Indication Off No Power Power On Power on Off The Router has an error System On The Router is initializing
ページ11に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Figure 2-2 Line: Connect to the Modem Port of Splitter or to the telephone line. Reset Button: There are two ways to reset the Router's factory defaults. 1) Use the Restore Default function on Management -> settings page in the router's Web-based Utility. 2) Use the Factory Default Reset button: Press the Reset button for more than five seconds and then wait for the router to reboot. 1, 2, 3, 4 (LAN): Through these ports, you can con
ページ12に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Operating temperature : 0 ℃~40 ℃ (32 ℉~104 ℉). Operating Humidity : 10% ~ 90% RH Non-congealing. 2.6 Connecting the Router Before installing the Router, please make sure your broadband service provided by your ISP is available. If there is any problem, please contact with your ISP. After that, please install the Router according to the following steps. Don't forget to pull out the power plug and keep your hands dry. 1. Locate an optimum
ページ13に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide the service provider’s network backbone and ultimately to the Internet. 2.6.2.2. Hub or Switch to Router Connection Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable If you wish to reserve the uplink port on the switch or hub for another device, connect to other MDI-X ports (1x, 2x, etc.) with a crossed cable. 2.6.2.3. Computer to Router Connection You can connect the Router directly to
ページ14に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Chapter 3. Quick Installation Guide After connecting the Router to your network, you should configure it. This chapter describes how to quickly configure the basic functions of your Router. These procedures only take you a few minutes. You can access the Internet via the Router immediately after successfully configuring. 3.1 Configure PC Your PC needs a network adapter. You may directly connect your adapter to the Router, or you may conne
ページ15に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Figure 3-2 3. In the General tab of Internet Protocol (TCP/IP) Properties menu, highlight Internet Protocol (TCP/IP) under “This connection uses the following items:” by clicking on it once. Click on the Properties button. Figure 3-3 4. Select “Obtain an IP address automatically” by clicking the radio-button. Click OK 8
ページ16に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Figure 3-4 Configure the IP address manually Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any value between 2 to 254, Subnet mask is 255.255.255.0, Gateway is 192.168.1.1, DNS address is the value provided by ISP). Now, you can run the Ping command in t he command prompt to verify the network connection between your PC and the Router. The following example is in Windows XP Operating Syste
ページ17に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Figure 3-5 If the result displayed is similar to that shown in figure below, it means that your PC has not connected to the Router. Figure 3-6 Please check it following these steps: 1. If the connection between your PC and the Router is correct? Note: The 1/2/3/4 LEDs of LAN port which you link to on the Router and LEDs on your PC's adapter should be lit. 2. If the TCP/IP configuration for your PC is correct? Note: If the Route
ページ18に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide 3.2 Configure the Router 1. Login to Home Page To use the web-based utility, launch a suitable web browser and direct it to the IP address of the Router. Type http://192.168.1.1 in the address bar of the browser. A dialog box prompts for User name and Password. Type in the default User name admin as well as Password admin and then click the OK button to access the Quick Setup screen. Figure 3-7 Note: Do not mix up the user name and pa
ページ19に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Figure 3-8 3. On the Connection Type screen, you can select a connection type (PPPoA, PPPoE, MER, IPoA or Bridging), which is provided by your ISP. We select PPPoE mode (For example), and then click “Next “to continue. Figure 3-9 4. Enter the PPP Username and PPP Password provided by your ISP. If PPPoE Service Name was provided by your ISP, enter the Service Name. Click “Next” to continue. 12
ページ20に含まれる内容の要旨
TD-W8910GB 54M Wireless ADSL2+ Router User Guide Figure 3-10 5. Use the default setting of this screen click “Next” to continue. Figure 3-11 6. Use the default IP Address 192.168.1.1 and Subnet Mask 255.255.255.0. Use the default setting of “Enable DHCP Server”, and click “Next” to continue. 13
