ページ1に含まれる内容の要旨
RC930_IB.QXD 10/10/00 1:12 PM Page 1
Wireless Modem Jack
Model RC 930 rev. 3.0
TABLE OF CONTENTS
Safety Precautions .............2
Getting Started ...................4
System Installation .............4
Connecting your Computer.5
Security Programming........6
Trouble-Shooting................7
Things You Should Know...8
Warranty.............................8
Thomson Consumer Electronics
Accessories and Components Business
ページ2に含まれる内容の要旨
RC930_IB.QXD 10/10/00 1:12 PM Page 2 Important Safety Precautions This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the system’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the system’s case. This symbol is intended to inform you that important operating and maintenance instructions are included in the literature accompanying the system. Read and follow precautions when installing and using the
ページ3に含まれる内容の要旨
RC930_IB.QXD 10/10/00 1:12 PM Page 3 Safety Precautions Continued FCC Part 68 & Class B Notices Your Wireless Modem System complies with Part 68 of FCC Rules. You must, upon request, provide the FCC registration number and the REN to your telephone company. These numbers are shown on the label on the base unit. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interferenc
ページ4に含まれる内容の要旨
RC930_IB.QXD 10/10/00 1:12 PM Page 4 Getting Started Unpacking Carefully remove units from packaging. If there is any visible damage, DO NOT attempt to operate the equipment. Notify your dealer or shipping carrier immediately. Keep this guide for future use. System Contents • Base Unit The base unit has two modular telephone jacks on the right side and a green indicator light. • Extension Unit The extension unit has one jack on the right side and a green indicator light. This is the unit
ページ5に含まれる内容の要旨
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
RC930_IB.QXD 10/10/00 1:12 PM Page 7 3. Once all extensions have been coded, you will need to verify the dialtone at each location. Your situation (system location, characteristics of the home) can, in some instances, affect performance and occasional interference may be experienced. Some static, buzzing or humming at certain locations within the operating area is possible. However, if you experience unusual levels of noise, follow the trouble shooting actions below. If the steps below do
ページ8に含まれる内容の要旨
RC930_IB.QXD 10/10/00 1:12 PM Page 8 Things You Should Know The following list of situations is provided to inform you of things that you may encounter when using the system. It is intended to help you get the best performance possible. Power Outages Only the telephone plugged into the base unit operates. Two-Line Phone Operations If two lines are being used, only one line can operate through the Wireless Modem Jack System. A single base and extension hook- up will only operate the phone li
