ページ1に含まれる内容の要旨
54M Wireless AP Router RNX-G400
User Manual
ページ2に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual Connecting the Broadband Router Prior to connecting the hardware, make sure to power off your Ethernet device, Cable/ADSL modem and Broadband Router. Then follow the steps below to connect the related devices. Connect your computer to the LAN port. Attach one end of the Ethernet cable with RJ-45 connector to your hub, switch or a computer’s Ethernet port, and
ページ3に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual 1.1 Windows 2000 Please follow the steps below to setup your computer: 1. Go to Start Settings Control Panel Figure 2-1 2. Double click the icon Network and Dial-up Connections 3. Highlight the icon Local Area Connection, right click your mouse, Click Properties Figure 2-2 3
ページ4に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual 4. Highlight Internet Protocol (TCP/IP), then press Properties button Figure 2-3 5. Choose Obtain an IP address automatically and Obtain DNS server address automatically, then press OK to close the Internet Protocol (TCP/IP) Properties window Figure 2-4 4
ページ5に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual 6. Press OK to close the Local Area Connection Properties window Figure 2-5 1.2 Windows XP/2003 Please follow the steps below to setup your computer: 1. Go to Start Settings Control Panel 2. Click Network and Internet Connections Figure 2-6 5
ページ6に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual 3. Click Network Connections Figure 2-7 4. Highlight the icon Local Area Connection, right click your mouse, Click Properties Figure 2-8 6
ページ7に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual 5. Highlight Internet Protocol (TCP/IP), then press Properties button Figure 2-9 6. Choose Obtain an IP address automatically and Obtain DNS server address automatically, then press OK to close the Internet Protocol (TCP/IP) Properties window Figure 2-10 7
ページ8に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual 7. Press OK to close the Local Area Connection Properties window Figure 2-11 8
ページ9に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual 2 Connection the Router After configuring the TCP/IP protocol, use the ping command to verify if the computer can communicate with the Router. To execute the ping command, open the DOS window and ping the IP address of the Broadband Router at the DOS prompt : To execute ping command, open the DOS window by clicking on Start -> Run. In the Run window, type CMD. A
ページ10に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual 3 Accessing the Web-Based Configuration Utility Launch the Web browser and type http://192.168.1.1 in the Address field and click Enter. After connected to the device, you will be prompted to enter the username and password. Type “guest” in the User Name field, the default password is “guest”. Figure 4-1 4 Quick Configuration for the Router After login, t
ページ11に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual PPPoE Input your PPPoE Account and Password you get from your ISP. Figure 5-2 Static IP Figure 4-3 11
ページ12に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual After selecting the proper WAN connection setting, click Apply to save and enable these settings with the Router. 5 Checking the Connection to the Internet To check the connection to the Internet, you can open the Web browser and go to a website. You can also go to the System Overview page of the router’s Web -based configuration utility. The WAN Interface gro
ページ13に含まれる内容の要旨
54M Wireless AP Router RNX-G400 User Manual 13
