ページ1に含まれる内容の要旨
Internet Broadband Router
XRT-401D/402D/104D
User’s Manual
1
ページ2に含まれる内容の要旨
Copyright Copyright (C) 2004 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable for
ページ3に含まれる内容の要旨
Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their trade names. In most, if not all cases, these designations are claimed as trademarks or registered trademarks by their respective companies. Revision User’s Manual for PLANET Internet Broadband Router: Model: XRT-401D/402D/104D Rev: 1.0 (July 2004) Part No.: EM-XRT402DV1 3
ページ4に含まれる内容の要旨
TABLE OF CONTENTS Chapter 1 Introduction.......................................................................................1 1.1 Features......................................................................................................1 1.2 Minimum Requirements ..............................................................................1 1.3 Package Contents.......................................................................................1 1.4 Get to know XRT-D.............
ページ5に含まれる内容の要旨
4.1 Status and Information.............................................................................. 52 4.2 Internet Connection................................................................................... 53 4.3 Device Status............................................................................................ 53 4.4 System Log............................................................................................... 54 4.5 Security Log....................................
ページ6に含まれる内容の要旨
Chapter 1 Introduction Congratulations on purchasing Planet XRT-401D/402D/104D(XRT-D router, in the following section). This Broadband router is a cost-effective IP Sharing Router that enables multiple users to share the Internet through ADSL or cable modems. Simply configure your Internet connection settings in XRT-D and plug your PC to the LAN port and you're ready to share files and access the Internet. The XRT-402D/104D’s multi-homing function can combine two/four WAN lines into one vi
ページ7に含まれる内容の要旨
1.4 Get to know XRT-D Back Panel The diagram (fig1.0/1.1) below shows XRT-401D/402D’s back panel. The router’s back panel is divided into three sections, LAN, WAN and Reset: Figure 1.0 XRT-401D Figure 1.1 XRT-402D 1) Local Area Network (LAN) XRT-D’s LAN ports are where you connect your LAN’s PCs, printer servers, hubs and switches etc. 2) Wide Area Network (WAN) The WAN ports are the segment connected to your xDSL or Cable modem and are linked to the Interne
ページ8に含まれる内容の要旨
LED Light Status Description PWR ON Router’s power supply is on WAN 10/100M ON WAN port 100Mbps is connected Off WAN port 10Mbps is connected WAN LNK/ACT ON WAN is connected OFF No WAN connection Flashing WAN port has Activity (ACT), data being sent LAN 10/100M ON LAN port 100Mbps is connected (Port 1-4) OFF LAN port 10Mbps is connected LAN LNK/ACT ON LAN is connected (Port 1-4) OFF No LAN connection Flashing LAN port has Activity (ACT), data being sent 1.5 Se
ページ9に含まれる内容の要旨
1.6 Getting started This is a step-by-step instruction on how to start using the router and get connected to the Internet. 1) Setup your network as shown in the setup diagram above (fig 1.2). 2) You then need to set your LAN PC clients so that it can obtain an IP address automatically. All LAN clients require an IP address. Just like an address, it allows LAN clients to find one another. Configure your PC to obtain an IP address automatically By default XRT-D’s DHCP is on,
ページ10に含まれる内容の要旨
8: Reboot the PC. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server. Please make sure that XRT-D’s DHCP server is the only DHCP server ?Note: available on your LAN. Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3 2b) Windows XP 1: Click the Start button and select Settings, then click Network Connections. The Network Connections window will appear. 2: Double-click Local Ar
ページ11に含まれる内容の要旨
5: Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server. Please make sure that XRT-D’s DHCP server is the only DHCP server available on your LAN. ?Note: Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3. 2c) Windows 2000 1: Click the Start button and select Settings, then click Control Panel. The Control Panel
ページ12に含まれる内容の要旨
6: Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server. Please make sure that XRT-D’s DHCP server is the only DHCP server ?Note: available on your LAN. Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3. 2d) Windows NT 1: Click the Start button and select Settings, then click Control Panel. The Control Panel
ページ13に含まれる内容の要旨
6: Check each of the tabs and verify the following settings: • IP Address: Select Obtain an IP address from a DHCP server. • DNS: Let all fields are blank. • WINS: Let all fields are blank. • Routing: Let all fields are blank. 7: Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server. Please make sure that XRT-D’s DHCP server is the only DHCP server ?Note: available
ページ14に含まれる内容の要旨
4) Once your PC has obtained an IP address from your router, enter the default IP address (broadband router’s IP address 192.168.0.1) into your PC’s web browser and press 5) The login screen below will appear. Enter the “User Name” and “Password” and then click to login. Note: By default the user name is “admin” and the password is “1234”. For security reasons it is recommended that you change the password as soon as possible (in General setup/system/password, see chapter
ページ15に含まれる内容の要旨
Menu Description Quick Setup Wizard (Chapter 2) Select your Internet connection type and then input the configurations needed to connect to your Internet Service Provider (ISP). General Setup (Chapter 3) This section contains configurations for the XRT- D’s advance functions such as: Address Mapping, Virtual Server, Access Control, Hacker Attack Prevention, DMZ, Special applications and other functions to meet your LAN requirements. Status Information (Chapter 4) In this
ページ16に含まれる内容の要旨
Chapter 2 Quick Setup The Quick Setup section is designed to get you using XRT-D as quick as possible. In the Quick Setup you are required to fill in only the information necessary to access the Internet. Once you click on the Quick Setup Wizard in the HOME page, you should see the screen below. Step 1) Time Zone The Time Zone allows your router to base its time on the settings configured here, this will affect functions such as Log entries and Firewall settings. Parameter
ページ17に含まれる内容の要旨
Step 2) Broadband Type In this section you have to select one of many types of connections that you used to connect your broadband router to your ISP (see screen below). Different ISP’s require different methods of connecting, please check with your ISP ?Note: for the types required.. Menu Description 2.1 Cable Modem Your ISP will automatically give you an IP address. 2.2 Fixed-IP xDSL Your ISP has given you an IP address already. 2.3 PPPoE Your ISP requires you to
ページ18に含まれる内容の要旨
2.1 Cable Modem Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP may also require you to fill in additional information such as Host Name and MAC address (see screen below). The Host Name and MAC address section is optional and you can skip it if your ISP does not require these settings for you to connect to the Internet. ?Note: Parameters Description Host Name If your ISP requires a Host Name, type in the host name provided by your I
ページ19に含まれる内容の要旨
2.2 Fixed-IP xDSL Select Static IP Address if your ISP has given you a specific IP address for you to use. Your ISP should provide all the information required in this section. Parameters Description IP The IP address that your ISP has given you. Gateway IP The gateway provided by your ISP DNS The ISP’s DNS server IP address Subnet Mask Enter the Subnet Mask provided by your ISP (e.g. 255.255.255.0) Click < when you have finished the configuration
ページ20に含まれる内容の要旨
2.3 PPPoE Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all the information required in this section. Parameter Description User Name The User Name provided by your ISP for PPPoE connection. Password The Password provided by your ISP for PPPoE connection. Service Name [Optional] The Service name should your ISP requires it, otherwise leave it blank. MTU This is optional. You can specify the maximum size of
