ページ1に含まれる内容の要旨
Internet Broadband Router
XRT-412
User’s Manual
1
ページ2に含まれる内容の要旨
Copyright Copyright (C) 2006 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable for
ページ3に含まれる内容の要旨
Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their trade names. In most, if not all cases, these designations are claimed as trademarks or registered trademarks by their respective companies. WEEE To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic
ページ4に含まれる内容の要旨
TABLE OF CONTENTS Chapter 1 Introduction .......................................................................................1 1.1 Features ......................................................................................................1 1.2 Minimum Requirements...............................................................................1 1.3 Package Contents .......................................................................................1 1.4 Get to know XRT-412........
ページ5に含まれる内容の要旨
4.3 Device Status ............................................................................................54 4.4 System Log ...............................................................................................55 4.5 Security Log ..............................................................................................56 4.6 Active DHCP Client ...................................................................................56 4.7 Statistics.................................
ページ6に含まれる内容の要旨
Chapter 1 Introduction Congratulations on purchasing PLANET XRT-412. This Broadband Router is an IP Sharing Router that enables multiple users to share the Internet through an ADSL or cable modem. Simply configure your Internet connection settings in the Broadband Router and plug your PC to the LAN port and you're ready to share files and access the Internet. As your network grows, you can connect another hub or switch to the router’s LAN ports, allowing you to easily expand your network
ページ7に含まれる内容の要旨
from the Internet. For example, some software sends network packets to the Internet in the background, even when you are not using the Internet. So please turn off your computer when you are not using it. This function also may not work with some ISP. So please make sure this function can work properly when you use this function in the first time, especially when your ISP charge you by time used. 1.4 Get to know XRT-412 Back Panel The diagram (fig1.0) below shows XRT-412’s back panel.
ページ8に含まれる内容の要旨
LED Light Status Description PWR ON Router’s power supply is on USB1 Flash Data is transmitting OFF No data transmitted USB2 Flash Data is transmitting OFF No data transmitted WAN 10/100M ON WAN port
ページ9に含まれる内容の要旨
1.6 Getting started This is a step-by-step instruction on how to start using the router and get connected to the Internet. 1) Setup your network as shown in the setup diagram above (fig 1.2). 2) You then need to set your LAN PC clients so that it can obtain an IP address automatically. All LAN clients require an IP address. Just like an address, it allows LAN clients to find one another. Configure your PC to obtain an IP address automatically By default XRT-412’s DHCP is o
ページ10に含まれる内容の要旨
8: Reboot the PC. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server. Please make sure that XRT-412’s DHCP server is the only DHCP server Note: available on your LAN. Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3 2b) Windows XP 1: Click the Start button and select Settings, then click Network Connections. The Network Connections window will appear. 2: Double-click Local A
ページ11に含まれる内容の要旨
5: Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server. Please make sure that XRT-412’s DHCP server is the only DHCP server available on your LAN. Note: Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3. 2c) Windows 2000 1: Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. 2: Double-clic
ページ12に含まれる内容の要旨
5: In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address automatically and Obtain DNS server address automatically as shown on the following screen. 6: Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server. Please make sure that XRT-412’s DHCP server is the only DHCP server available on your LAN. Note: Once you’ve configured your PC to obtain an IP address automatically
ページ13に含まれる内容の要旨
4: In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok button to start installing the TCP/IP protocol. You may need your Windows CD to complete the installation. 5: After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of Network Protocols and then click the Properties button. 6: Check each of the tabs and verify the following settings: • IP Address: Select Obtain an IP address from a DHCP server. • DNS: Le
ページ14に含まれる内容の要旨
3) Once you have configured your PCs to obtain an IP address automatically, the router’s DHCP server will automatically give your LAN clients an IP address. By default XRT-412’s DHCP server is enabled so that you can obtain an IP address automatically. To see if you have obtained an IP address, see Appendix A. Note: Please make sure that XRT-412’s DHCP server is the only DHCP server available on your LAN. If there is another DHCP on your network, then you’ll need to switch one of the DH
ページ15に含まれる内容の要旨
The Status Information section is for you to monitor the router’s current status information only. Tools (Chapter 5) If you want to Reset the router (because of problems) or save your configurations or upgrade the firmware then the Tools section is the place to do this. Menu Description Quick Setup Wizard (Chapter 2) Select your Internet connection type and then input the configurations needed to connect to your Internet Service Provider (ISP). General Setup (Chapter 3
ページ16に含まれる内容の要旨
7) Click on Quick Setup Wizard (see chapter 2) to start configuring settings required by your ISP so that you can start accessing the Internet. The other sections (General Setup, Status Information and Tools) do not need to be configured unless you wish to implement/monitor more advance features/information. Select the section (Quick Setup Wizard, General Setup, Status Information and Tools) you wish to configure and proceed to the corresponding chapter. Use the selections on the web m
ページ17に含まれる内容の要旨
Chapter 2 Quick Setup The Quick Setup section is designed to get you using XRT-412 as quickly as possible. In the Quick Setup you are required to fill in only the information necessary to access the Internet. Once you click on the Quick Setup Wizard in the HOME page, you should see the screen below. Step 1) Time Zone The Time Zone allows your router to base its time on the settings configured here, this will affect functions such as Log entries and Firewall settings. Paramete
ページ18に含まれる内容の要旨
Different ISP’s require different methods of connecting to the Internet, please Note: check with your ISP as to the type of connection it requires. Menu Description 2.1 Cable Modem Your ISP will automatically give you an IP address 2.2 Fixed-IP xDSL Your ISP has given you an IP address already 2.3 PPPoE Your ISP requires you to use a Point-to-Point Protocol over Ethernet (PPPoE) connection. 2.4 PPTP Your ISP requires you to use a Point-to-Point Tunneling Protocol (
ページ19に含まれる内容の要旨
2.1 Cable Modem Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP’s may also require that you fill in additional information such as Host Name and MAC address (see screen below). The Host Name and MAC address section is optional and you can skip this section Note: if your ISP does not require these settings for you to connect to the Internet. Parameters Description Host Name If your ISP requires a Host Name, type in the host name provi
ページ20に含まれる内容の要旨
2.2 Fixed-IP xDSL Select Fixed-IP xDSL if your ISP has given you a specific IP address for you to use. Your ISP should provide all the information required in this section. Parameters Description IP This is the IP address that your ISP has given you. Subnet Mask Enter the Subnet Mask provided by your ISP. Gateway This is the ISP’s IP address gateway. DNS This is the ISP’s DNS server IP address. TTL Select Enable to plus 1 count in TTL response when user try to pin
