ページ1に含まれる内容の要旨
802.11n Wireless Broadband Router
WNRT-620
User’s Manual
ページ2に含まれる内容の要旨
Copyright Copyright © 2008 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET. PLANET makes no representations or warranties, either expressed or implied, with respect to the contents here
ページ3に含まれる内容の要旨
This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two conditions: (1) This device may not cause harmful interference, and (2) this Device must accept any interference received, including interference that may cause undesired operation. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FC
ページ4に含まれる内容の要旨
TABLE OF CONTENTS CHAPTER 1 INTRODUCTION.................................................................................................. 1 1.1 PACKAGE CONTENTS .................................................................................................. 2 1.2 FEATURES.................................................................................................................. 3 1.3 SPECIFICATION ....................................................................................
ページ5に含まれる内容の要旨
7.6 STATISTICS............................................................................................................... 87 CHAPTER 8 TOOLS .......................................................................................................... 88 8.1 CONFIGURATION TOOLS............................................................................................ 89 8.2 FIRMWARE UPGRADE................................................................................................ 90 8.
ページ6に含まれる内容の要旨
Chapter 1 Introduction Thank you for purchasing WNRT-620. This manual guides you on how to install and properly use the WNRT-620 in order to take full advantage of its features. - 1 -
ページ7に含まれる内容の要旨
1.1 Package Contents Make sure that you have the following items: • One WNRT-620 • One Power Adapter • One CD Disk • One Quick Installation Guide • One Ethernet Cable Note: If any of the above items are missing, please contact your supplier for support. - 2 -
ページ8に含まれる内容の要旨
1.2 Features Compliant with IEEE 802.11n (Draft 2.0) wireless technology Provides up to 300Mbps data rate Support Wi-Fi Protected Setup (WPS) Backward compatible with 802.11g / 802.11b standard Farther coverage, less dead spaces and high er throughput with 802.11n technology Supports 64/128-bit WEP, WPA (TKIP with I EEE 802.1x), WPA2 (AES with IEEE 802.1x) functions for high level of security AP/Station-Infrastructure/Bridge (Point to Point, Point to Multi-Point, WDS)/Repeate
ページ9に含まれる内容の要旨
1.3 Specification Standard IEEE 802.11b/g, 802.11n Draft 2.0 11b mode: DSSS Signal Type 11g mode: OFDM 11n mode: OFDM, MIMO 11b mode: CCK, DQPSK, DBPSK Modulation 11g mode: 64 QAM, 16 QAM, QPSK, BPSK 11n mode: 64 QAM, 16 QAM, QPSK, BPSK WAN Port 1 x 100Base-TX, Auto-MDI/MDI-X LAN Port 4 x 100Base-TX, Auto-MDI/MDI-X Antenna connector 3 x Fixed Omni Antenna Data Encryption 64 bit / 128 bit WEP, WPA-PSK, WPA, WPA2 Frequency 2.4GHz - 2.484GHz 11b mode: 16~18dBm Output Power 11g m
ページ10に含まれる内容の要旨
Chapter 2 Hardware Installation Before you proceed with the installation, it is necessary that you have enough information about the WNRT-620. - 5 -
ページ11に含まれる内容の要旨
2.1 Hardware Connection 1. Locate an optimum location for the WNRT-620. The best place for your WNRT-620 is usually at the center of your wireless network, with line of sight to all of your mobile stations. 2. Adjust the antennas of WNRT-620. Try to adjust them to a position that can best cover your wireless network. The antenna’s position will enhance the receiving sensitivity. 3. Connect RJ-45 cable to WNRT-620 LAN port. Connect one of the LAN ports on WNRT-620 to your LAN switch/hu
ページ12に含まれる内容の要旨
- 7 -
ページ13に含まれる内容の要旨
2.2 LED Indicators LED Color STATE MEANING On Device power on PWR Green Off Device power off Blinking During boot up procedure Transmitting or receiving data through the Wireless Blinking WLAN Orange LAN Off Wireless LAN is no function On WAN port is connected at 100Mbps 100M Green Off WAN port is disconnected at 100Mbps WAN On Link is established LNK/ACT Green Blinking Packets are transmitting or receiving On LAN is connected to 100Mbps device 100M Green Off LAN is di
ページ14に含まれる内容の要旨
Chapter 3 Web Login Web configuration provides a user-friendly graphical user interface (web pages) to manage your WNRT-620. A WNRT-620 with an assigned IP address will allows you to monitor and configure via web browser (e.g., MS Internet Explorer or Netscape). 1. Open your web browser. 2. Enter the IP address of your WNRT-620 in the address field (default IP address is http://192.168.0.1). 3. A User Name and Password dialog box will appear. Please enter your User Name and Password
ページ15に含まれる内容の要旨
Section Description Select your Internet connection type and then input the configurations needed Quick Setup to connect to your Internet Service Provider (ISP). This section contains configurations for the Broadband router’s advance functions such as: Port Forwarding, Virtual Server, Access Control, Hacker General Setup Attack Prevention, DMZ, Special applications and other functions to meet your LAN requirements. You can also configure the wireless detail settings here. This optio
ページ16に含まれる内容の要旨
Chapter 4 Quick Setup This section describes the basic configuration of the WNRT-620 and allows you to connect to Internet easily. - 11 -
ページ17に含まれる内容の要旨
4.1 Time Zone The time information is used for Log entries and Firewall settings. You can keep the default Time Server address or set a new IP address for your router to synchronize its time. Click “Next” to continue. Parameter Description Select the time zone of the country you are currently in. The router will Set Time Zone set its time based on your selection. Remain it as default or, you can manually assign an IP address of the Time Server. The information of Timer Server can
ページ18に含まれる内容の要旨
4.2 Broadband Type Before establishing the Internet connection, please be sure to check with your ISP, and obtain all necessary information from them. Broadband Description ISP will automatically give you an IP address. Please refer to section Cable Modem 4.2.1 for details. ISP has given you a fixed IP address already. Please refer to section Fixed-IP Xdsl 4.2.2 for details. ISP requires you to use a Point-to-Point Protocol over Ethernet (PPPoE) PPPoE xDSL connection. Please r
ページ19に含まれる内容の要旨
4.2.1 Cable Modem With Cable Modem connection, the ISP will automatically give you an IP address. Some ISP may also require you to fill in additional information such as Host Name and MAC address (see screen below). Note: The Host Name and MAC address section is optional and you can skip this section if your ISP does not require these settings for you to connect to the Internet. Parameters Description Host Name Type in the host name provided by your ISP if any; otherwise, just leave i
ページ20に含まれる内容の要旨
4.2.2 Fixed-IP xDSL Select Fixed-IP xDSL if you’re ISP has given you a specified IP address. Your ISP should provide all the information required in this section. Parameters Description IP address assigned by your The IP address that you’re ISP should provide you. Service Provider Subnet Mask Enter the Subnet Mask provided by your ISP (e.g. 255.255.255.0). DNS Address The IP address of ISP’s DNS (Domain Name Service) Server. Service Provider Gateway The ISP’s IP address gateway
