ページ1に含まれる内容の要旨
ADE-4120
ADSL Firewall Router
User’s Manual
ページ2に含まれる内容の要旨
Copyright Copyright (C) 2004 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable f
ページ3に含まれる内容の要旨
Table of Contents CHAPTER 1. INTRODUCTION..............................................................................................................................1 1.1 AN OVERVIEW OF THE ADE-4120....................................................................................................................1 1.2 PACKAGE CONTENTS ......................................................................................................................................1 1.3 ADE-4120 FEATURES
ページ4に含まれる内容の要旨
APPENDIX B. FAQ AND PRODUCT SUPPORT................................................................................................. 36 APPENDIX C GLOSSARY................................................................................................................................... 39 iv
ページ5に含まれる内容の要旨
Chapter 1. Introduction 1.1 An Overview of the ADE-4120 The ADE-4120 ADSL Firewall Router provides office and residential users the ideal solution for securely sharing a high-speed ADSL broadband Internet connection on a 10/100Mbps Fast Ethernet backbone. It has built-in 4-port 10/100Mbps Ethernet switch for easily connecting to multiple PCs. They can support downstream transmission rates of up to 8Mbps and upstream transmission rates of up to 1Mbps. It is compliant with Multi-Mode st
ページ6に含まれる内容の要旨
PLANET ADE-4120 ADSL Firewall Router LAN site and automatic switching between MDI and MDI-X for 10Base-T and 100Base- TX ports is supported. Multi-Protocol to Establish A Connection: Supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or routed) and PPP over Ethernet (RFC 2516) to establish a connection with the ISP. The product also supports VC-based and LLC-based multiplexing. Network Address Translation (NAT): Allows multi-users to acce
ページ7に含まれる内容の要旨
Chapter 1 Introduction 1.4 ADE-4120 Application Internet Connection with Firewall: They are the perfect solution to connect a small group of PCs to a high-speed broadband Internet connection. Multi-users can have high-speed Internet access simultaneously. With their packet filter and access control function, the internal network is greatly secured. 3
ページ8に含まれる内容の要旨
Chapter 2. Using the Router 2.1 Cautions for using the ADE-4120 Do not place the ADE-4120 under high humidity and high temperature. Do not use the same power source for ADE-4120 with other equipment. Do not open or repair the case yourself. If the ADE-4120 is too hot, turn off the power immediately and have a qualified serviceman repair it. Place the ADE-4120 on a stable surface. Only use the power adapter that comes with the package. 2.2 The Front Panel LEDs ADE-4120 LED M
ページ9に含まれる内容の要旨
Chapter 2 Using ADE-4120 2.3 The Rear Ports ADE-4120 Port Meaning ADSL Connect the supplied RJ-11 cable to this port when connecting to the ADSL/telephone network. CONSOLE Connect a RS-232 cable to this port when connecting to a PC’s RS-232 port (9-pin serial port). LAN 1 — 4 Connect an UTP Ethernet cable to one of the (RJ-45 four LAN ports when connecting to a PC or an connector) office/home network of 10Mbps or 100Mbps. After the device is powered on, press it to reset
ページ10に含まれる内容の要旨
Chapter 3. Configuration The ADE-4120 can be configured with your Web browser. The web browser is included as a standard application in the following operation systems, UNIX, Linux, Mac OS, Windows 98/NT/2000/Me, etc. The product provides a very easy and user-friendly interface for configuration. 3.1 Before Configuration This section describes the configuration required by LAN-attached PCs that communicate with the ADE-4120, either to configure the device, or for network access. Thes
ページ11に含まれる内容の要旨
Chapter 2 Using ADE-4120 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC. 3. Click Properties. 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button. 7
ページ12に含まれる内容の要旨
PLANET ADE-4120 ADSL Firewall Router 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click “OK” to finish the configuration. 8
ページ13に含まれる内容の要旨
Chapter 2 Using ADE-4120 3.3.2 For Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. 9
ページ14に含まれる内容の要旨
PLANET ADE-4120 ADSL Firewall Router 3.3.3 For Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click LAN Area Connection. 3. In the LAN Area Connection Status window, click Properties. 10
ページ15に含まれる内容の要旨
Chapter 2 Using ADE-4120 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. 11
ページ16に含まれる内容の要旨
PLANET ADE-4120 ADSL Firewall Router 3.3.4 For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection 3. In the LAN Area Connection Status window, click Properties. 12
ページ17に含まれる内容の要旨
Chapter 2 Using ADE-4120 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons 13
ページ18に含まれる内容の要旨
PLANET ADE-4120 ADSL Firewall Router 6. Click OK to finish the configuration. 3.4 Factory Default Settings Before configurating this ADE-4120, you need to know the following default settings. 1. Web Configurator Does not require user name and password 2. Device IP Network settings in LAN site IP Address : 192.168.1.254 Subnet Mask : 255.255.255.0 3. ISP setting in WAN side Bridge (RFC1483 bridge) 4. DHCP server DHCP server is enabled. Start IP Address : 192.168.1.1 End IP Add
ページ19に含まれる内容の要旨
Chapter 2 Using ADE-4120 are shown below. LAN Port WAN Port 192.168.1.254 The Bridge function is IP address enabled by default. Subnet Mask 255.255.255.0 Enabled DHCP server function IP addresses for 100 IP addresses continuing from distribution to PCs 192.168.1.1 through 192.168.1.100 (Actually, it can support up to 253 users.) 3.5 Information from the ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service i
ページ20に含まれる内容の要旨
PLANET ADE-4120 ADSL Firewall Router 3.6 Configuring with the Web Browser Open the web browser, enter the local port IP address of this ADE-4120 , which defaults at 192.168.1.254, and click “Go”, you will get a function overview page when login successfully. 3.6.1 Home At the “Home” function page, the top navigation pane provides links to the desired setup page. The left navigation pane provides the detail explanations of the available configuration of each option on the top pan