ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Contents Features of your Roadster V.92 modem ....................................................................... 4 Installing your Modem ................................................................................................... 5 Speakerphone ............................................................................................................... 6 Installing your Drivers.................................................................................................... 7 Win
ページ3に含まれる内容の要旨
Warranty Information ................................................................................................... 31 Limitations of Warranty .................................................................................... 31 Regulatory Information ................................................................................................ 32 Austel Requirements (Australia Only) ............................................................. 32 Telecom New Zealand Warnings ..........
ページ4に含まれる内容の要旨
Features of your Roadster V.92 modem Connect to the Internet faster The Roadster V.92 cuts the time it takes to connect by 40% or more. Upload faster The Roadster V.92 can upload at speeds of up to 48,000 bps. Download faster The Roadster V.92 uses new V.44 compression, which allows you greater throughput for viewing HTML pages on the Internet. Supporting the following Standards 56 Kbps (download)48 Kbps (send)with Auto-negotiation of V..92 and V.90 . Data -V .92,V .90,V .34 ,V .32 bis,V .32
ページ5に含まれる内容の要旨
Installing your Modem Before beginning, please turn your computer off. Connect the serial port on the back of the modem (marked SERIAL) to a COM port on your PC using the serial cable. Connect the power pack to a power point and connect the other end to the modem power socket (marked POWER). Connect the telephone cord to the line socket on the back of the modem (marked LINE) and the other end to a phone socket. Turn on your modem. Refer to the Multiple Operational Features following to p
ページ6に含まれる内容の要旨
Speakerphone There are three ways to use your speakerphone modem: 1. Use the inbuilt speakerphone functions, such as microphone an speaker. 2. Plug in a headset and boom microphone for easy hands free communication. 3 Use your computer's external speaker, sound card and sound card cable to enhance video conferencing. Note: The Headset is available as an optional extra. www.netcomm.com.au Rev.1 - YML658 Page 6 AM5698 Roadster V.92 User Guide
ページ7に含まれる内容の要旨
Installing your Drivers Windows XP 1. Please insert the supplied NetComm CD, and when the "Found New Hardware Wizard" recognizes the new "NetComm V.92 Modem", select "Install from a list or specific location (Advanced)" and then click "Next>". 2. Select "Search for the best driver in these locations" and choose "Include this location in the search:". Type in "D:\DRIVERS\AM5698" (where d:\ is the letter of your CD ROM drive) and click on "Next>". 3. The Wizard will search for the correct driver.
ページ8に含まれる内容の要旨
Windows 2000 1. Please insert the supplied NetComm CD, and when the "Found New Hardware Wizard" starts. Click on "Next>". 2. Select "Search for a suitable driver for my device (recommended)" and click on "Next>". 3. Select "Specify a location" and click on Next>". 4. Enter the driver location "D:\DRIVERS\AM5698" (where D:\ is the drive letter of your CD ROM drive) and click on "OK". www.netcomm.com.au Rev.1 - YML658 Page 8 AM5698 Roadster V.92 User Guide
ページ9に含まれる内容の要旨
5. Windows will locate the correct driver. Click on "Next>" to continue. 6. Windows 2000 will now copy the driver files. 7. Once the files have been copied click "Finish" to complete installation of the NetComm V.92 Modem. Note: After modem installation has completed the Wave Device for Voice modem will be installed without your intervention. Rev.1 - YML658 www.netcomm.com.au AM5698 Roadster V.92 User Guide Page 9
ページ10に含まれる内容の要旨
Windows Me 1. Please insert the supplied NetComm CD, and when the "Add New Hardware Wizard" recognizes the new "NetComm V.92 Modem", select "Specify the location of the driver (Advanced)" and then click "Next>". 2. Select "Search for the best driver in these locations" and choose "Specify a location:". Type in "D:\DRIVERS\AM5698" (where d:\ is the letter of your CD ROM drive) and click on "Next>". 3. Windows will confirm the driver and location. Click on "Next>" to continue. 4. Click on "Finish"
ページ11に含まれる内容の要旨
Windows 98 1. Please insert the supplied NetComm CD, and when the "Add New Hardware Wizard" recognizes the new "NetComm V.92 Modem", click on "Next>". 2. Select "Search for the best driver for your device (Recommended)" and click on "Next>". 3. Select "Specify a location:". Type in "D:\DRIVERS\AM5698\" (where d:\ is the letter of your CD ROM drive) and click on "Next>". 4. Windows will confirm the driver and location. Click on "Next>". 5. The required files will then be copied to your computer
ページ12に含まれる内容の要旨
6. Click on "Finish" to complete installation of your NetComm V.92 modem. Note: After modem installation has completed the Wave Device for Voice modem will be installed without your intervention. www.netcomm.com.au Rev.1 - YML658 Page 12 AM5698 Roadster V.92 User Guide
ページ13に含まれる内容の要旨
Windows NT4.0 1. Please insert the supplied NetComm CD and go to Start - Settings - Control Panel. 2. Double-click on "Modems" icon to install a new modem. 3. If this is the first time a modem has been installed you will be taken directly to the "Install New Modem" window (step 4). If not, click on "Add." 4. Select "Don't detect my modem; I will select it from a list" and then click "Next" to continue. 5. Click "Have Disk
" to install from the installation disk. Rev.1 - YML658 www.netcomm.com.au
ページ14に含まれる内容の要旨
6. Type in "D:\DRIVERS\AM5698" (where D:\ is the letter of your CD ROM drive) and click "Next" to continue. 7. Select "NetComm V.92 Modem" from the list of Models and click "Next" to continue. 8. Select "Selected ports" choose the appropriate COM port. Click "Next" to start installing the selected modem. 9. Click "Finish" to complete the installation. www.netcomm.com.au Rev.1 - YML658 Page 14 AM5698 Roadster V.92 User Guide
ページ15に含まれる内容の要旨
Installing your Software Facsimile and Voice Mail Utility 1. Insert the NetComm CD into your CD- ROM drive. Go to the Start Menu and click on Run. 2. Browse the CD for the location or type in "D:\Software\Faxtalk\setup.exe" where D: is the letter of your CD-ROM drive. 2. Select a language and click OK to continue. 3. Follow the instructions on screen to install the FaxTalk Communicator software. 4. You will be prompted to select your Modem. Select the "Don't query the modem, I will select it f
ページ16に含まれる内容の要旨
Using your Roadster V.92 Modem with FaxTalk Configuring voice/fax mailboxes Voice/fax mailboxes are the basic type of mailbox used by FaxTalk Communicator. These mailboxes can receive both voice messages and faxes. You can also configure a Voice/ fax mailbox to act as an announce only or fax only mailbox. To change the settings of a Voice/fax mailbox, select the desired mailbox and click Properties. A Voice/fax mailbox contains three configuration tabs. General settings The General tab contains
ページ17に含まれる内容の要旨
Logging incoming calls You can elect to have all incoming calls logged to a mailbox regardless of whether the caller left a message. If Caller ID information is available, The Caller ID name and number will also be logged with the call. To log all incoming calls: 1. Check the Log all calls where the caller did not leave a message option. 2. Click OK to save the change. Automatically detecting fax calls You can enable a mailbox to automatically detect incoming fax calls while playing the greeting
ページ18に含まれる内容の要旨
Password protecting a mailbox You can password protect individual Voice / Fax mailboxes for privacy. You have the option of requiring a password for local access, local and remote access, or just remote access. To set a mailbox password: 1. Enter a numeric password in the password field. If you want password protection only when accessing the mailbox remotely, check the Prompt for password with remote access only option. 2. Click OK to save the change. Greeting settings The Greeting tab includes
ページ19に含まれる内容の要旨
Playing a greeting To play and review a greeting: 1. Select the desired greeting from the Greeting list. 2. In the Greeting Recorder, select the playback device from the 3. Click the Play button to begin playback. If you are playing to multimedia device you can use the playback slider to move backward in the greeting. Deleting a greeting To delete a greeting: 1. Select the desired greeting from the Greeting list and click the button. You will be asked to confirm that you wish to delete selected
ページ20に含まれる内容の要旨
To record a greeting: 1. Click New to create a new greeting 2. In the Greeting Recorder, select the recording device in the From list that you will be using the record the greeting. 3. Click the Record button to begin recording. Click the Stop button when you are finished. 4. Once you have recorded the greeting, click Save and save the greeting to a file. Selecting a greeting To select a greeting for a mailbox, select the desired greeting Greeting list and click OK. Playing a greeting To play an
