ページ1に含まれる内容の要旨
®
A Division of Cisco Systems, Inc.
GHz
2.4
802.11g
Wireless-G
Music Bridge
User Guide
WIRELESS
Model No.
WMB54G
ページ2に含まれる内容の要旨
Wireless-G Music Bridge Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause ca
ページ3に含まれる内容の要旨
Wireless-G Music Bridge Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in this Guide? 2 Chapter 2: Getting to Know the Wireless Music Bridge 4 The Back Panel 4 The Front Panel 5 Chapter 3: Setting up the Wireless-G Music Bridge 6 Starting the Setup Wizard 6 Chapter 4: Connecting the Wireless-G Music Bridge 18 Overview 18 Connecting to Portable Audio Speakers 18 Connecting to your Audio Receiver 19 Chapter 5: Using the Wireless-G Music Bridge Utility 22 Accessing the Wireless-G Musi
ページ4に含まれる内容の要旨
Wireless-G Music Bridge Appendix C: Upgrading Firmware 36 Appendix D: Windows Help 37 Appendix E: Glossary 38 Appendix F: Specifications 43 Appendix G: Warranty Information 44 Appendix H: Regulatory Information 45 Appendix I: Contact Information 51
ページ5に含まれる内容の要旨
Wireless-G Music Bridge List of Figures Figure 2-1: Back Panel 4 Figure 2-2: Front Panel 5 Figure 3-1: Setup Wizard’s Welcome Screen 6 Figure 3-2: License Agreement 6 Figure 3-3: Connecting the PC 7 Figure 3-4: Connecting the PC to the Bridge 7 Figure 3-5: Connecting the Power 8 Figure 3-6: LED Status 8 Figure 3-7: Select the Bridge 9 Figure 3-8: Login 9 Figure 3-9: Change the Password 10 Figure 3-10: Available Wireless Network 11 Figure 3-11: WEP Key Needed for Connection 11 Figure 3-12: PSK Ne
ページ6に含まれる内容の要旨
Wireless-G Music Bridge Figure 4-2: Portable Audio Speaker Connection 18 Figure 4-3: RCA Cable 19 Figure 4-4: RCA Cable Connection 19 Figure 4-5: Optical Digital Cable 20 Figure 4-6: Optical Digital Cable Connection 20 Figure 4-7: Digital Coaxial Cable 21 Figure 4-8: Digital Coaxial Cable Connection 21 Figure 5-1: Utility Icon 22 Figure 5-2: Status Tab 22 Figure 5-3: Equalizer Tab 23 Figure 5-4: Information Tab 23 Figure 6-1: Password 24 Figure 6-2: Setup - Infrastructure 25 Figure 6-3: Setup -
ページ7に含まれる内容の要旨
Wireless-G Music Bridge Chapter 1: Introduction Welcome Thank you for choosing the Wireless-G Music Bridge. The Wireless-G Music Bridge allows you to listen to digital music in your living room as well as on your computer. How does the Music Bridge do all of this? The Linksys Wireless-G Music Bridge lets you bring the digital music streaming to or stored on your computer to your Home Entertainment Center without running cables through the house. Using a wireless connection, the Music Bridge
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
Wireless-G Music Bridge Appendix G: Regulatory Information This appendix supplies the Adapter’s regulatory information. Appendix H: Contact Information This appendix provides contact information for a variety of Linksys resources, including Technical Support. Chapter 1: Introduction 3 What’s in this Guide?
ページ10に含まれる内容の要旨
Wireless-G Music Bridge Chapter 2: Getting to Know the Wireless Music Bridge The Back Panel The Bridge's ports, where all cables are connected, are located on the back panel. Figure 2-1: Back Panel Audio Out L/R The Audio Out (Left and Right) ports connect to the Audio In (Left and Right) ports of your audio receiver. Line Out The Line Out port is where you can connect headphones or portable audio speakers with a headphone jack. Coaxial Out The Coaxial Out (Digital Audio) port is where you c
ページ11に含まれる内容の要旨
Wireless-G Music Bridge The Front Panel The Music Bridge's LEDs, where information about network activity is displayed, are located on the front panel. Wireless Power Ethernet Power Blue. The Power LED lights up when the Wireless-G Music Bridge is powered on. Figure 2-2: Front Panel Ethernet Blue. The Ethernet LED serves two purposes. If the LED is continuously lit, the Music Bridge is successfully connected to a device through the Ethernet port. If the LED is flashing, it is an indication of
ページ12に含まれる内容の要旨
Wireless-G Music Bridge Chapter 3: Setting up the Wireless-G Music Bridge Starting the Setup Wizard The Bridge is set up with the Setup Wizard that comes on the CD enclosed with the Bridge. This chapter will guide you through the setup procedure. This Setup Wizard will take you through all the steps necessary to set up and configure the Bridge. To begin the setup process, insert the Setup Wizard CD into your PC's CD-ROM drive. Setup Wizard's Welcome screen should appear on your monitor. If it
ページ13に含まれる内容の要旨
Wireless-G Music Bridge 3. The next screen displayed shows how the Bridge should be connected. Connect one end of your supplied Ethernet cable to your PC’s Ethnet Port. Click the Next button to continue or Back to return to the previous screen. Figure 3-3: Connecting the PC 4. Connect the other end of the Ethernet cable to the Bridge’s yellow Ethernet Port. Click the Next button to continue or Back to return to the previous screen. Figure 3-4: Connecting the PC to the Bridge Chapter 3: Setting
ページ14に含まれる内容の要旨
Wireless-G Music Bridge 5. Next, you will connect the power. Connect the power adapter into the Power Port of the Bridge and into an electrical outlet. Click the Next button to continue or Back to return to the previous screen. Figure 3-5: Connecting the Power 6. The Power and Ethernet will light up when the cables are all correctly installed. If the LEDs do not light up, re- check the cable connections to the Bridge, PC, and Power. Click the Next button to continue or Back to return to the pre
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
Wireless-G Music Bridge 9. You may change the password and the Bridge’s name on this screen. Device Name. The default name for the Bridge will appear in the Device Name field. You may change the name by entering a new one in the Device Name field. The device name can be up to 19 characters. Password and Confirm. Enter a new password in the Password field, then enter it again in the Confirm field. The password must be between 4 to12 characters. Security Question and Your Answer. Select a secur
ページ17に含まれる内容の要旨
Wireless-G Music Bridge Setting Up the Bridge with Available Networks The Available Wireless Networks screen will appear next. The available wireless networks are listed in the table on the center of the screen by wireless network name (SSID). Select the wireless network you wish to connect to and click the Connect button. (If you do not see your network listed, you can click the Refresh button to bring the list up again.) If the network utilizes wireless security, you will need to configure
ページ18に含まれる内容の要旨
Wireless-G Music Bridge PSK Needed for Connection Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. . Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel. Figure 3-12: PSK Needed for Connection 2. The Install the Utility screen will appear if the Utility is not installed on your PC.
ページ19に含まれる内容の要旨
Wireless-G Music Bridge Setting Up the Bridge with Manual Setup If your network is not listed with the available networks, click Manual Setup on the Available Wireless Network screen to set up the Bridge manually. 1. After clicking Manual Setup, the Network Settings screen will appear. If your network has a router or other DHCP server, click the radio button next to Obtain network settings automatically (DHCP). If your network does not have a DHCP server, click the radio button next to Specif
ページ20に含まれる内容の要旨
Wireless-G Music Bridge 3. If you chose Infrastructure Mode, go to Step 4 now. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings screen will appear. Select the correct Channel for your wireless network. The channel you choose should match the channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep the default setting. Then, select the Network Mode in which your wireless network will operate. In Mixed, Wireless-B and Wireless-G devices c
