ページ1に含まれる内容の要旨
LevelOne
WBR-3408
11g Wireless Broadband Router, QoS
User Manual
V1.0.0-0610
ページ2に含まれる内容の要旨
Table of Contents CHAPTER 1 INTRODUCTION .............................................................................................. 1 Wireless Broadband router Features .............................................................................. 1 Package Contents .............................................................................................................. 4 Physical Details................................................................................................
ページ3に含まれる内容の要旨
Security............................................................................................................................. 92 Upgrade Firmware.......................................................................................................... 94 APPENDIX A TROUBLESHOOTING................................................................................. 95 Overview ..................................................................................................................
ページ4に含まれる内容の要旨
Introduction Chapter 1 Introduction 1 This Chapter provides an overview of the Wireless Broadband router's features and capabilities. Congratulations on the purchase of LevelOne Wireless Broadband router. The Wire- less Broadband router is a multi-function device providing the following services: • Shared Broadband Internet Access for all LAN users. • 4-Port Switching Hub for 10BaseT or 100BaseT connections. • Wireless Access Point for 802.11b and 802.11g Wireless Stations. Figure 1:
ページ5に含まれる内容の要旨
Wireless Broadband router User Guide • Fixed or Dynamic IP Address. On the Internet (WAN port) connection, the Wireless Broadband router supports both Dynamic IP Address (IP Address is al- located on connection) and Fixed IP Address. Advanced Internet Functions • Communication Applications. Support for Internet communication applica- tions, such as interactive Games, Telephony, and Conferencing applications, which are often difficult to use when behind a Firewall, is included. • Special
ページ6に含まれる内容の要旨
Introduction • Simple Configuration. If the default settings are unsuitable, they can be changed quickly and easily. LAN Features • 4-Port Switching Hub. The Wireless Broadband router incorporates a 4-port 10/100BaseT switching hub, making it easy to create or extend your LAN. • DHCP Server Support. Dynamic Host Configuration Protocol provides a dynamic IP address to PCs and other devices upon request. The Wireless Broad- band router can act as a DHCP Server for devices on your local L
ページ7に含まれる内容の要旨
Wireless Broadband router User Guide Package Contents The following items should be included: • WBR-3408 • Power Adapter • Dipole Antenna • Quick Installation Guide • CD Manual If any of the above items are damaged or missing, please contact your dealer imme- diately. 4
ページ8に含まれる内容の要旨
Introduction Physical Details Front-mounted LEDs Figure 2: Front Panel Power LED On - Power on. Off - No power. WLAN LED On - Wireless connection available; Wireless Access Point is ready for use. Off - No Wireless connection available. Flashing - Data is being transmitted or received via the Wireless access point. Data includes "network traffic" as well as user data. Internet LED On - Internet connection is available. Off - No Internet connection available. Flashing - Data is b
ページ9に含まれる内容の要旨
Wireless Broadband router User Guide Rear Panel Figure 3: Rear Panel Antenna 2dBi detachable antenna. WAN Connect the DSL or Cable Modem here. If your modem came with a cable, use the supplied cable. Otherwise, use a stan- dard LAN cable. LAN Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports. If required, any port can be connected to another hub. Any LAN port will automatically function as an "Uplink" port when necessary. This button has two (2) functions:
ページ10に含まれる内容の要旨
Chapter 2 Installation 2 This Chapter covers the physical installation of the Wireless Broad- band router. Requirements • Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. • For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for WAN port usage) • To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE802.11b or IEEE802.11g spe
ページ11に含まれる内容の要旨
Wireless Broadband router User Guide 1. Choose an Installation Site Select a suitable place on the network to install the Wireless Broadband router. Ensure the Wireless Broadband router and the DSL/Cable modem are powered OFF. For best Wireless reception and performance, the Wireless Broadband router should be positioned in a central location with minimum obstructions between the Wireless Broad- band router and the PCs. Also, if using multiple Access Points, adjacent Access Points
ページ12に含まれる内容の要旨
Chapter 3 Setup 3 This Chapter provides Setup details of the Wireless Broadband router. Overview This chapter describes the setup procedure for: • Internet Access • LAN configuration • Wireless setup • Assigning a Password to protect the configuration data. PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Configuration. Other configuration may also be required, depending on which features and functions of the Wireless Broadband router you wish
ページ13に含まれる内容の要旨
Wireless Broadband router User Guide Configuration Program The Wireless Broadband router contains an HTTP server. This enables you to con- nect to it, and configure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers: • Netscape V4.08 or later • Internet Explorer V4 or later Preparation Before attempting to configure the Wireless Broadband router, please ensure that: • Your PC can establish a physical con
ページ14に含まれる内容の要旨
Setup If you can't connect If the Wireless Broadband router does not respond, check the following: • The Wireless Broadband router is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command: • Open the MS-DOS window or command prompt window. • Enter the command: ping 192.168.0.1 If no response is received, either the connection is not working, or your PC's IP address is not compatible with the Wireless Broad- band route
ページ15に含まれる内容の要旨
Wireless Broadband router User Guide Setup Wizard The first time you connect to the Wireless Broadband router, the Setup Wizard will run automatically. (The Setup Wizard will also run if the Wireless Broadband router's default settings are restored.) 1. Step through the Wizard until finished. • You need to know the type of Internet connection service used by your ISP. Check the data supplied by your ISP. • The common connection types are explained in the tables below. 2. On the final
ページ16に含まれる内容の要旨
Setup PPTP PPTP is mainly used in • Server IP Address. Europe. • User name and pass- word. You connect to the ISP only when required. The IP • IP Address allocated to address is usually allocated you, if Static (Fixed). automatically, but may be Static (Fixed). Other Modems (e.g. Broadband Wireless) Type Details ISP Data required Dynamic Your IP Address is allocated None. IP Address automatically, when you connect to you ISP. Static (Fixed) Your ISP allocates a perma- IP Addre
ページ17に含まれる内容の要旨
Wireless Broadband router User Guide Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below. Figure 5: Home Screen Navigation & Data Input • Use the menu bar on the left of the screen, and the "Back" button on your Browser, for navigation. • Changing to another screen without clicking "Save" does NOT save any changes you may have made. You must "Save" before cha
ページ18に含まれる内容の要旨
Setup LAN Screen Use the LAN link on the main menu to reach the LAN screen. An example screen is shown below. Figure 6: LAN Screen Data - LAN Screen TCP/IP IP address for the Wireless Broadband router, as seen from the IP Address local LAN. Use the default value unless the address is already in use or your LAN is using a different IP address range. In the latter case, enter an unused IP Address from within the range used by your LAN. Subnet Mask The default value 255.255.255.0 is
ページ19に含まれる内容の要旨
Wireless Broadband router User Guide Buttons Save Save any changes you have made. Note that if you change the Wireless Broadband router's IP address, your connection will be lost. You will have to re-connect using the new IP address. The "Cancel" button will discard any data you have entered and Cancel reload the file from the Wireless Broadband router. DHCP What DHCP Does A DHCP (Dynamic Host Configuration Protocol) Server allocates a valid IP address to a DHCP Client (PC or device
ページ20に含まれる内容の要旨
Setup To Configure your PCs to use DHCP This is the default setting for TCP/IP under Windows 98/ME. See Chapter 4 - Client Configuration for the procedure to check these settings. 17
