ページ1に含まれる内容の要旨
USB 2.0 Link Cable
User Manual English
LINDY No. 42953
www.lindy.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (June 2005)
ページ2に含まれる内容の要旨
CONTENTS 1. Introduction----------------------------------------------------------------------------------2 2. Package Contents-------------------------------------------------------------------------2 3. Product Features--------------------------------------------------------------------------2 4. System Requirements-------------------------------------------------------------------2 5. Driver Installation (PC to PC File Transfer) ---------------------------------3 ® 5.
ページ3に含まれる内容の要旨
1. Introduction Congratulations on your purchase of the LINDY USB 2.0 Link cable. This unique cable allows you to easily connect two computers via a USB port and instantly transfer files at great speed. The USB 2.0 Link cable is your fast solution for peer-to-peer file transfer between two computers via the USB port. The cable provides true plug-and- play capability while transferring files at much greater speeds than USB1.1. The SuperLink application provides a drag-and-drop user-
ページ4に含まれる内容の要旨
5. Driver Installation (PC to PC File Transfer) ® 5.1 Windows 98 Driver Installation 5.1.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.1.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cableinto PC’s USB Port until the driver is installed. ® 5.1.3
ページ5に含まれる内容の要旨
5.1.5 Once the installation is complete, a new icon called “SuperLink” will appear on your desktop. 5.1.6 Plug the USB 2.0 Link cableinto an available USB Port on the PC, the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers” in “Device Manager”. USB 2.0 Link Cable User’s
ページ6に含まれる内容の要旨
® 5.2 Windows 98 Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then please use the following un-install procedure. Attention: Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cablehas been unplugged from the PC. 5.2.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”.
ページ7に含まれる内容の要旨
® 5.3 Windows ME Driver Installation 5.3.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.3.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cableinto the PC’s USB Port until the driver is installed. ® 5.3.3 Windows will install the driver to
ページ8に含まれる内容の要旨
5.3.5 Once the installation is complete, a new icon called “SuperLink” will appear on your desktop. 5.3.6 Plug the USB 2.0 Link cableinto an available USB Port on the PC, the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers” in “Device Manager”. USB 2.0 Link Cab
ページ9に含まれる内容の要旨
® 5.4 Windows ME Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then follow the un-install procedure as following. Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cablehas been unplugged from the PC. 5.4.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.4.2 Select “Only remove USB Link Adapter driver”,
ページ10に含まれる内容の要旨
® 5.5 Windows 2000 Driver Installation 5.5.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.5.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cableinto PC’s USB Port until the driver is installed. ® 5.5.3 Windows will install the driver
ページ11に含まれる内容の要旨
5.5.5 Once installation is complete, a new icon “SuperLink” will appear on your desktop. 5.5.6 Plug the USB 2.0 Link cableinto an available USB Port, , the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers” of “Device Manager”. USB 2.0 Link Cable User’s Manual 10
ページ12に含まれる内容の要旨
® 5.6 Windows 2000 Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then just follow the un-install procedure as following. Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cablehas been unplugged from the PC. 5.6.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.6.2 Select “Only remove USB Link
ページ13に含まれる内容の要旨
® 5.7 Windows XP Driver Installation 5.7.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.7.2 Select path of “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cableinto PC’s USB Port until the driver is installed. ® 5.7.3 Windows will install the driver to “C:\Program Fi
ページ14に含まれる内容の要旨
5.7.5 Click on “Finish” to complete this installation. 5.7.6 After installation is complete a new icon “SuperLink” will appear on your desktop. 5.7.7 Plug the USB 2.0 Link cableinto PC’s USB Port, then “Found New Hardware Wizard” will help you to install driver. Select “Install the software automatically [Recommended]” and click “Next” to continue.
ページ15に含まれる内容の要旨
® 5.7.8 Windows will show a warning message as following, press “Continue Anyway” to go on this installation. 5.7.9 Click on “Finish” to complete this installation. 5.7.10 Plug the USB 2.0 Link cableinto a USB Port, , the pc will detect and install a new item “USB SuperLink Adapter” at “Universal Serial Bus controllers” of “Device Manager”.
ページ16に含まれる内容の要旨
® 5.8 Windows XP Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then just follow the un-install procedure as following. Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cablehas been unplugged from the PC. 5.8.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.8.2 Select “Only remove USB Link Adapter d
ページ17に含まれる内容の要旨
6. Running the SuperLink Application Program (PC to PC File Transfer) 6.1 Windows 98, ME, Windows 2000 & Windows XP Follow the steps below on how to run the SuperLink application program: The installation of the application is similar for all four operating systems. We ® have used Windows 2000 for this example. 6.1.1 Once PC#1 and PC#2 have finished installing the driver, connect each end of the USB 2.0 Link cableto PC#1 and PC#2. 6.1.2 Double click on the icon “Sup
ページ18に含まれる内容の要旨
6.1.5 The remote site will display “It’s busy now, please wait ….” 7. Using USB Networking (Ethernet Emulation) ® ® ® ® 7-1 Windows 98, Windows ME, Windows 2000, Windows XP Driver Installation Insert the CD in to your CD-Rom drive. Select the path “D:\DRIVER\ USB 2.0 LINK CABLE 42953\WINDOWS\Virtual Network_Install” (D: represents CD-R
ページ19に含まれる内容の要旨
8. FAQ Q: What if the USB 2.0 Link cablecan’t be successfully installed? A: This situation is common when your USB 2.0 port is a PCI card. If your USB 2.0 PCI Card uses a Microsoft driver then please download version 5.1.2600 (used with Windows 2000 & XP) from the Microsoft Web site. Q: How do I know the two PC’s are successfully connected? A: The bottom of the screen will show “Remote Connected” on both computers. Q: Should I un-install the driver each time the cab
ページ20に含まれる内容の要旨
10. FCC Statement This device generates and uses radio frequency and may cause interference to radio and television reception if not installed and used properly. This has been tested and found to comply with the limits of a Class B computing device in accordance with the specifications in Part 15 of FCC Rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will
