ページ1に含まれる内容の要旨
hp StorageWorks
edge switch 2/32 installation guide
Part Number: AA-RSTZB-TE/958-000290-000
Second Edition (January 2003)
This installation guide provides procedures for setting up,
configuring, and managing the Edge Switch 2/32.
ページ2に含まれる内容の要旨
© Hewlett-Packard Company, 2003. All rights reserved. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected b
ページ3に含まれる内容の要旨
Contents About This Guide Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Symbols in Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Contents HAFM Server Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–10 Ethernet Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–11 Optional Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–11 2 Installing and Configuring the Edge Switch 2/32 Summary of Installation Tasks . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Contents Configure Port Addresses (S/390 Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–36 Configure SNMP Trap Message Recipients . . . . . . . . . . . . . . . . . . . . . . . . . . 2–39 Configure and Enable E-mail Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–40 Configure and Enable Call-Home Features . . . . . . . . . . . . . . . . . . . . . . . . . . 2–42 Configure Threshold Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Contents Declaration of Conformity for Products Marked with FCC Logo—United States Only A–3 Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3 Network and Serial Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3 IEC EMC Statement (Worldwide). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–4 Spécification ATI Classe A (France) . . . . . . . . . . .
ページ7に含まれる内容の要旨
Contents 2–2 Connect To dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8 2–3 Port Settings dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–9 2–4 HyperTerminal window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–10 2–5 Disconnect Now dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11 2–6 Save Session dialog box . . . .
ページ8に含まれる内容の要旨
Contents 2–40 Switch page—Identification tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–56 2–41 Switch page—Date/Time tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–57 2–42 Switch page—Parameters tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–59 2–43 Switch page—Fabric Parameters tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–61 2–44 Switch page—Network tab . . . . . . . . . . .
ページ9に含まれる内容の要旨
About This Guide About This Guide This installation guide provides information to help you: Set up the Edge Switch 2/32. Configure the Edge Switch 2/32. Manage the Edge Switch 2/32. Contact technical support for additional assistance. Intended Audience This book is intended for use by administrators who are experienced with the following: Fibre Channel technology StorageWorks Fibre Channel Switches by HP Related Documentation For a list of corresponding documentation included with t
ページ10に含まれる内容の要旨
About This Guide Document Conventions The conventions included in Table 1 apply. Table 1: Document Conventions Element Convention Cross-reference links Blue text: Figure 1 Key names, menu items, buttons, and Bold dialog box titles File names, application names, and text Italics emphasis User input, command names, system Monospace font responses (output and messages) COMMAND NAMES are uppercase unless they are case sensitive Variables Monospace, italic font Website addresses Sans serif font (ht
ページ11に含まれる内容の要旨
About This Guide Symbols in Text These symbols may be found in the text of this manual. They have the following meanings. WARNING: Text set off in this manner indicates that failure to follow directions in the warning could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or data. IMPORTANT: Text set off in this manner presents clarifying information or specific instructions. NOTE: T
ページ12に含まれる内容の要旨
About This Guide Any surface or area of the equipment marked with these symbols indicates the presence of a hot surface or hot component. Contact with this surface could result in injury. WARNING: To reduce the risk of injury from a hot component, allow the surface to cool before touching. Power supplies or systems marked with these symbols indicate the presence of multiple sources of power. WARNING: To reduce the risk of injury from electrical shock, remove all power cords to completely
ページ13に含まれる内容の要旨
About This Guide Getting Help If you still have a question after reading this manual, contact an HP authorized service provider or access our website: http://thenew.hp.com. HP Technical Support In North America, call technical support at 1-800-652-6672, available 24 hours a day, 7 days a week. NOTE: For continuous quality improvement, calls may be recorded or monitored. Outside North America, call technical support at the nearest location. Telephone numbers for worldwide technical support ar
ページ14に含まれる内容の要旨
About This Guide xiv edge switch 2/32 installation guide
ページ15に含まれる内容の要旨
1 Introduction The HP StorageWorks Edge Switch 2/32 provides dynamic switched connections between Fibre Channel servers and devices in a storage area network (SAN) environment. SANs introduce the concept of server-to-device networking and multi-switch fabrics, eliminate requirements for dedicated connections, and enable the enterprise to become data centric. A SAN provides speed, high capacity, and flexibility for the enterprise, and is primarily based upon Fibre Channel architecture. The
ページ16に含まれる内容の要旨
HPJ3294A Introduction Edge Switch 2/32 Description The switch can be installed on a table or desk top, or mounted in an equipment cabinet or in any standard equipment rack. Multiple switches and the HAFM server communicate on a local area network (LAN) through one or more 10Base-T Ethernet hubs. One or more 24-port Ethernet hubs are optional and can be ordered with the switch. Up to three hubs are daisy-chained as required to provide additional Ethernet connections as more switches (or other
ページ17に含まれる内容の要旨
Introduction Features The following sections describe the features of the Edge Switch 2/32: Error-Detection, Reporting, and Serviceability The switch provides the following error-detection, reporting, and serviceability features: Light-emitting diodes (LEDs) on switc h FRUs and adjacent to Fibre Channel ports that provide visual indicators of hardware status or malfunctions. System and threshold alerts, event logs, audit logs, link incident logs, threshold alert logs, and hardware logs th
ページ18に含まれる内容の要旨
Introduction Data collecti on through the Product Manager application to help isolate system problems. The data includes a memory dump file and audit, hardware, and engineering logs. Simple network management protocol (SNMP) management using the Fibre Alliance MIB that runs on the HAFM server. Up to 12 authorized management workstations can be configured through the HAFM application to receive unsolicited SNMP trap messages. The trap messages indicate operational state changes and fail
ページ19に含まれる内容の要旨
Introduction Zones are grouped into zone sets. A zone set is a group of zones that is enabled (activated) or disabled across all switches in a multi-switch fabric. Only one zone set can be enabled at one time. Multi-Switch Fabrics A Fibre Channel topology that consists of one or more interconnected switches or switch elements is called a fabric. Operational software provides the ability to interconnect switches (through expansion port (E_Port) connections) to form a multi-switch fabric. The
ページ20に含まれる内容の要旨
IML 10/100 StorageWorks edge switch 2/32 Introduction checking is done for pre-existing conditions and no prompts display to guide users through tasks. Refer to hp StorageWorks CLI reference guide for edge switches and directors. This manual provides details on the Product Manager application for the Edge Switch 2/32 only. Use this manual for the Product Manager installed on an HAFM server. This manual does not cover the Embedded Web Server interface or CLI. Field Replaceable Units The switc
