Gateway ATT110900764の取扱説明書

ページ1に含まれる内容の要旨

4
Verify wireless Internet connectivity
Verify that the Wireless Gateway is connected wirelessly to the Internet by completing the following steps:
A Write down the Network Name (SSID) and the MAC address, shown on the top or bottom of your Gateway, in the space
provided below right. The Network Name (SSID) includes “EDGE” plus the last three digits of the Gateway serial number.
The MAC address is used as your PSK (Pre-shared Key) for wireless network encryption.
B Go to your computer’s Wirele

ページ2に含まれる内容の要旨

To replace an existing Wireless Gateway tethered to a Motorola modem, complete the steps in this guide. This guide assumes that you already have a properly installed modem from which you can access the Internet. Before beginning, power down and Configure Continued unplug the power cord from the electrical outlet for the Wireless Gateway. Then disconnect and save the power cord and all other cables connected to the existing Wireless Gateway. You will reuse these cables to install the new Gateway.