ページ1に含まれる内容の要旨
11b/g Long Range Multi-function 7+1 AP
ECB3500
User’s Manual
Version: 1.4
ページ2に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 Table of Contents 11B/G LONG RANGE MULTI-FUNCTION 7+1 AP................................................................................ 1 ECB3500 ....................................................................................................................................................... 1 USER’S MANUAL .............................................................................
ページ3に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 4.4.1 WIRELESS NETWORK.................................................................................................................. 22 4.4.1.1 WIRELESS SECURITY - WEP .................................................................................................. 23 4.4.1.2 WIRELESS SECURITY – WPA-PSK, WPA2-PSK, WPA-MIXED ............................................ 25 4.4.1.3 WIRELES
ページ4に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 6.5 MANAGEMENT............................................................................................................................ 58 6.5.1 ADMINISTRATION ....................................................................................................................... 58 6.5.2 SNMP SETTINGS .........................................................................................
ページ5に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 8.5.4 WIRELESS ADVANCED SETTINGS ............................................................................................... 90 8.6 MANAGEMENT............................................................................................................................ 91 8.6.1 ADMINISTRATION ....................................................................................................
ページ6に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 Revision History Version Date Notes 1.0 September 14, 2008 Initial Version 1.1 December 15, 2008 GUI and product spec 1.2 April 21, 2009 FCC Statement update 1.4 May 18 , 2009 IC Statement update 6
ページ7に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 1 Introduction ECB3500 is a powerful, enhanced, enterprise level product that supports 7 multi- functions to operate for every kind of working environment. This is a Wireless high transmit output power and high data rate indoor device which plays different roles of Access Point/ Client Bridge / Repeater / WDS AP / WDSBridge / Client Router / AP Router. It operates seamlessly in the 2.4
ページ8に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 and functions for each SSID by manager Antenna diversity support Enhance the traffic signal WPA2/WPA/ IEEE 802.1x support Powerful data security 802.1x Supplicant support (CB More sensitive data security in Client Bridge mode mode) MAC address filtering in AP Ensure the security of network connections mode(up to 50) User isolation support (AP mode) Protect the private network between cli
ページ9に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 1.4 System Requirements The following are the minimum system requirements in order configure the device. PC/AT compatible computer with an Ethernet interface. Operating system that supports HTTP web-browser 1.5 Applications The wireless LAN products are easy to install and highly efficient. The following list describes some of the many applications made possible through the power a
ページ10に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 b) Infrastructure for enterprise LANs. a) Ad-hoc (peer-to-peer) Mode This is the simplest network configuration with several computers equipped with the PC Cards that form a wireless network whenever they are within range of one another. In ad-hoc mode, each client is peer-to- peer, would only have access to the resources of the other client and does not require an access point. This
ページ11に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 11
ページ12に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 2 Understanding the Hardware 2.1 Hardware Installation 1 Place the unit in an appropriate place after conducting a site survey. 2 Plug one end of the Ethernet cable into the RJ-45 port on the rear panel of the device and another end into your PC/Notebook. 3 Insert the DC-inlet of the power adapter into the port labeled “DC-IN” and the other end into the power socket on the wall. T
ページ13に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 2. Select Internet Protocol (TCP/IP) and then click on the Properties button. This will allow you to configure the TCP/IP settings of your PC/Notebook. 3. Select Use the following IP Address radio button and then enter the IP address and subnet mask. Ensure that the IP address and subnet mask are on the same subnet as the device. For Example: Dev
ページ14に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 3 Switching Between Operating Modes This device can operate in the following modes: a) Access Point / WDS AP b) Client Bridge c) WDS Bridge d) Repeater e) AP Router f) Client Router This chapter will describe how to switch between operating modes. 3.1 Logging In To configure the device through the web-browser, enter the IP address of the device (default: 192.168.1.1) into
ページ15に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 Select and operating mode from the drop-down list and then click on the Apply button. 15
ページ16に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 4 Access Point / WDS Operating Mode Access Point WDS AP 16
ページ17に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 4.1 Logging In To configure the device through the web-browser, enter the IP address of the device (default: 192.168.1.1) into the address bar of the web-browser and press Enter. Make sure that the device and your computers are configured on the same subnet. Refer to Chapter 2 in order to configure the IP address of your computer. After connecting to the IP address, the web-browser
ページ18に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 Wireless Client List, and System Log. Each option is described in detail below. 4.2.1 Main Click on the Main link under the Status drop-down menu. The status that is displayed corresponds with the operating mode that is selected. Information such as operating mode, system up time, firmware version, serial number, kernel version and application version are displayed in the ‘System’
ページ19に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 4.2.2 Wireless Client List Click on the Wireless Client List link under the Status drop-down menu. This page displays the list of Clients that are associated to the Access Point. The MAC addresses and signal strength for each client is displayed. Click on the Refresh button to refresh the client list NOTE: You will only see the client when you have other wireless devices connected.
ページ20に含まれる内容の要旨
11b/g Wireless Long Range Multi-function 7+1 AP Version 1.2 4.3.1 System Properties Click on the System Properties link under the System drop-down menu. This page allows you to switch the operating mode of the device, as well as specify a name and select the operating region. Device Name: Specify a name for the device (this is not the SSID), Country/Region: Select a country from the drop-down list. Operating Mode: Select and oper
