ページ1に含まれる内容の要旨
ADSL Wireless Router
AR-6024WG
User’s Manual
ページ2に含まれる内容の要旨
Table of Contents Specification----------------------------------------------------------------------------------------------3 Package Contents --------------------------------------------------------------------------------------9 General Setting---------------------------------------------------------------------------------------- 12 OnePage Setup --------------------------------------------------------------------------- 16 Wireless ------------------------------------------------------
ページ3に含まれる内容の要旨
UI Preferences----------------------------------------------------------------------------- 58 Update Gateway -------------------------------------------------------------------------- 59 User Management ------------------------------------------------------------------------ 60 System Commands----------------------------------------------------------------------- 61 Status ---------------------------------------------------------------------------------------------- 62 System Log----------
ページ4に含まれる内容の要旨
Specification ADSL Wireless-g Broadband Router Features ADSL Standards DMT modulation and demodulation Tone detection for low power mode ITU 992.1 (G.dmt) Annex A, B, C ITU 992.2 (G.lite) ITU 992.3 ADSL2 (G.dmt.bis) ITU 992.4 ADSL2 (G.lite.bis) ITU 992.5 ADSL2+ ANSI T1.413 Issue 2 Dying Gasp (Optional) Full-rate adaptive modem Maximum downstream rate of 24 Mbps (ADSL2+) Maximum upstream rate of 1 Mbps G.lite adaptive modem Maximum downstream rate of 1.5 Mbps Maximum
ページ5に含まれる内容の要旨
Static routing DHCP Server and Client NAPT (Network Address and Port Translation) NAT (Network Address Translation) ICMP (Internet Control Message Protocol) Simultaneous USB and Ethernet operation IGMP (Internet Group Management Protocol) 802.11g Wireless Access Point 54Mbps Access Point for wireless connectivity Interoperable with IEEE 802.11g (PBCC & OFDM Modulation Technology supports) 2.4GHz compliant equipment Supports full mobility and seamless roaming from cell to cell Suppor
ページ6に含まれる内容の要旨
Power: Input: 90~120V or 200~240V, 50/60Hz Output: 7.5VDC/1.5A OS: Windows 98SE/ 2000/ ME/ XP System Requirement: PII-266 + 32M RAM LED Indication: PWR, ADSL LINK, WLAN, LAN Software Upgrade: Upgrade by Ethernet Port Certification FCC Part 15, CE, 5
ページ7に含まれる内容の要旨
ADSL Wireless Router 4 Ports LAN Features ADSL Standards DMT modulation and demodulation Tone detection for low power mode ITU 992.1 (G.dmt) Annex A, B, C ITU 992.2 (G.lite) ITU 992.3 ADSL2 (G.dmt.bis) ITU 992.4 ADSL2 (G.lite.bis) ITU 992.5 ADSL2+ ANSI T1.413 Issue 2 Dying Gasp (Optional) Full-rate adaptive modem Maximum downstream rate of 24 Mbps (ADSL2+) Maximum upstream rate of 1 Mbps G.lite adaptive modem Maximum downstream rate of 1.5 Mbps Maximum upstream rate of
ページ8に含まれる内容の要旨
NAPT (Network Address and Port Translation) NAT (Network Address Translation) ICMP (Internet Control Message Protocol) Simultaneous USB and Ethernet operation IGMP (Internet Group Management Protocol) 802.11g Wireless Access Point 54Mbps Access Point for wireless connectivity Interoperable with IEEE 802.11g (PBCC & OFDM Modulation Technology supports) 2.4GHz compliant equipment Supports full mobility and seamless roaming from cell to cell Support Ad hoc and Infrastructure mode Suppor
ページ9に含まれる内容の要旨
Specification Hardware Line Connection: RJ-11 (2 wires) RJ-45 (4 port) Connection Power: Input: 90~120V or 200~240V, 50/60Hz Output: 7.5VDC/1.5A OS: WIN 98SE ; WIN 2000 ；WIN ME ；WIN XP System Requirement: PII-266 + 32M RAM LED Indication: PWR, ADSL LINK, WLAN, LAN 1~4 Software Upgrade: Upgrade by Ethernet Port Certification FCC Part 15, CE, Application Diagram Internet XDSL 8
ページ10に含まれる内容の要旨
Package Contents ADSL Wireless Router CD-ROM containing Manual Ethernet Cable (CAT.5 UTP Straight-Through) ADSL Cable (Standard telephone cable) Power Adapter Quick Installation Guide 9
ページ11に含まれる内容の要旨
4 Port ADSL Wireless Router Splitter (optional and changes depending on country specification) Factory Reset button Power Adapter Power cord connect here RJ-11 ADSL port connect ADSL cable here RJ-45 Ethernet port connect Ethernet cable here 10
ページ12に含まれる内容の要旨
4 Port ADSL Wireless Router Label Meaning Status Indicates Power Power On Power is on Off Power is off WLAN Wireless LAN Flashing Check wireless device. Flashes when data is being sent or LAN 1/ LAN 2/ LAN Link Flashing received on the LAN connection. LAN 3/ LAN 4 Indicates a link to your LAN or Network On card is active. Indicates no link to LAN Off A valid ADSL connection. ADSL Link Link An active WAN session. Active Act 11
ページ13に含まれる内容の要旨
General Setting Move your cursor as following sequence Start \ Settings \ Control Panel and click Control Panel. Then double-click on the Network Connections In the LAN or High-Speed Internet window, right-click on icon corresponding to your network interface card (NIC) and select Properties.(This icon may be labeled Local Area Connection). 12
ページ14に含まれる内容の要旨
In the General Tab of the Local Area Connection Properties menu. Highlight Internet Protocol (TCP/IP) under “This connection uses the following items.” by click on it once. Click on the Properties button. Select Obtain an IP Address automatically: by clicking once in the circle. Click OK button to confirm and save your changes, and the close the Control Panel. 13
ページ15に含まれる内容の要旨
Release IP & Renew IP, then Check Default Gateway: 192.168.1.1. Launch your PC web browser and enter the URL: http://192.168.1.1 In the User name/Password prompt, please type in Admin/Admin as default. 14
ページ16に含まれる内容の要旨
Please wait for the Home page to appear. 15
ページ17に含まれる内容の要旨
OnePage Setup When working with wide area connections, the first thing you must do is to have the handle of the connection. Once you have the handle for a Connection you must define the PVC and protocol settings for it. Name: Enter the name of your ISP. This information is for identification purposes only. Type: There six kinds of method (PPPoE/ PPPoA/ Static/ DHCP/ Bridge/ CLIP). PPP Settings Encapsulation: Select you encapsulation type. (Supplied by your ISP). Username: Enter th
ページ18に含まれる内容の要旨
preset amount of time. The default is 60 seconds. If you set the time to 0, the ISDN connection will remain always connected to the ISP. Keep Alive: If mode is LCP, This is the Keep Alive timer. If a reply to the LCP echo is not received in this amount if time, the connection is dropped. The Default is 10. Authentication: Set the required authentication protocol. (Auto/ CHAP/ PAP) MRU: Maximum Receive Unit indicates the peer of PPP connection the maximum size of the PPP information field t
ページ19に含まれる内容の要旨
Type: There six kinds of method (PPPoE/ PPPoA/ Static/ DHCP/ Bridge/ CLIP). Static Settings Encapsulation: Select you encapsulation type. (Supplied by your ISP). IP Address: Private IP address for connecting to a local private network (Default: 192.168.1.1). Netmask: Netmask for the local private network (Default: 255.255.255.0). Default Gateway: This field is optional. Enter in the IP address of the router on your network. DNS: Sets the IP address of the DNS server. Mode: Bridged and
ページ20に含まれる内容の要旨
Type: There six kinds of method (PPPoE/ PPPoA/ Static/ DHCP/ Bridge/ CLIP). DHCP Settings Encapsulation: Select you encapsulation type. (Supplied by your ISP). IP Address: Private IP address for connecting to a local private network (Default: 192.168.1.1). PVC Settings VPI: If instructed to change this, type in the VPI value for the initial connection (using PVC 0). Default = 0. VCI: If instructed to change this, type in the VCI value for the initial connection (using PVC 0). Default =
