ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
DI-LB604 User’s Manual Table of Contents Table of Contents Package Contents ............................................................................... 4 Minimum System Requirements .............................................................. 4 Introduction ...................................................................................... 5 Features and Benefits .......................................................................... 6 Hardware Overview ...............................
ページ3に含まれる内容の要旨
DI-LB604 User’s Manual Table of Contents UPnP ............................................................................................................38 Misc ..............................................................................................................39 Status .................................................................................................................41 Device Info ..........................................................................................
ページ4に含まれる内容の要旨
DI-LB604 User’s Manual Package Contents Package Contents CAT-5 Ethernet Cable (All the DI-LB604’s Ethernet ports are Auto-MDIX) Power Adapter (5.0V, 2A) CD-ROM with Software and Manual Quick Installation Guide Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. Minimum System Requirements Ethernet-Based Cable or DSL M
ページ5に含まれる内容の要旨
DI-LB604 User’s Manual Introduction Introduction The D-Link Express EtherNetwork DI-LB604 is a 4-port Ethernet Broadband Router. The D-Link DI-LB604 enables users to quickly and easily share a high speed Internet connection. The D-Link DI-LB604 also incorporates many advanced features, traditionally found in more expensive routers. After completing the steps outlined in the Quick Installation Guide (included in your package) you will have the ability to share a single Internet connection as
ページ6に含まれる内容の要旨
DI-LB604 User’s Manual Features and Benefits Features and Benefits Connects multiple computers to a Broadband (Cable or DSL) modem to share the Internet connection. Allows you to quickly and easily share an Internet connection with multiple computers and devices. Supports multiple and concurrent IPSec and PPTP pass-through sessions, so multiple users behind the DI-LB604 can access corporate networks through various VPN clients more securely. The Web-Based user interface displays a
ページ7に含まれる内容の要旨
DI-LB604 User’s Manual Hardware Overview Hardware Overview Connections Power Receptor LAN Ports These are the connections for Ethernet cables to Ethernet enabled computers. WAN Ports This is for the connection of an Ethernet cable to your Cable or DSL modem. Reset Button Pressing this button restores the Router to its original factory default settings. D-Link Systems, Inc. 7
ページ8に含まれる内容の要旨
DI-LB604 User’s Manual Hardware Overview LEDs WAN LEDs A solid light indicates a connection on the WAN port. These LEDs blink during data transmission. Power LED A solid light indicates a proper connection to the proper power supply. Local Network LEDs A solid light on each port indicates a connection to an Ethernet enabled computer. These LEDs blink during data transmission. Status LED This LED will be off to indicate proper operation and it will blink during data transmission. D-L
ページ9に含まれる内容の要旨
DI-LB604 User’s Manual Getting Started Getting Started D-Link Systems, Inc. 9
ページ10に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu Using the Configuration Menu Whenever you want to configure your DI-LB604, you can access the Configuration Menu by opening the Web-browser and typing in the IP Address of the DI-LB604. The DI-LB604’s default IP Address is shown below: http://192.168.0.1 Open the Web browser. Type in the IP Address of the Router (http://192.168.0.1). Note: if you have changed the default IP Address assigned to the DI-LB604, make sure to
ページ11に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu Home The Home tab provides the following configuration options: Wizard, WAN, LAN, DHCP and Load Balance Wizard The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard. Home > Wizard These buttons appear on most of the configuration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a configuration change. D-Lin
ページ12に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu WAN Home > WAN Connection Connection Mode: There are three connection modes for each WAN port, Enable, Disable and Backup. Set to Disable if there is no modem connected to the WAN port. If both WAN ports are used, one is set to Enable and the other is set to Backup, the backup line will automatically be used when the other line is disconnected. Static IP: Select this if you want to specify a fixed IP address for the WAN port. Dynamic IP: S
ページ13に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu Address Information Address If you choose the connection type Static IP, then you have to Information: fill in the information, IP address, Subnet Mask, and Gateway, provided by your ISP. PPTP Dialup Username / These 2 fields must be completed if you are using PPPoE or Password: PPTP dialup. If you are using PPTP dialup, remember you must select Static IP or Dynamic IP on Connection Type setup. DNS DNS (Domain There are three entries available
ページ14に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu Port Options Home > WAN > Port Options Interface Select the WAN port that you would like these port options to WAN Port: apply to. MTU: The largest amount of data that can be transferred across a given physical network. Connection Health Check Connection Health There are three methods, ICMP, HTTP and Traffic, provided for device to check if WAN interfaces are connected to internet Check: or not. A successful response of either method means t
ページ15に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu Method: ICMP: The health checking is performed by sending an ICMP echo request packet to the specific destination. The specific destination (“Alive Indicator”) could be either : 1. if the input box is filled (NAME or IP address): the host is used. 2. if the input box is left blank: gateway of wan interface will be used. If one ICMP echo reply packet from Alive Indicator or gateway is received, the connection is considered OK. If there are no
ページ16に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu LAN Home > LAN LAN Settings IP Address: This is the LAN IP address for this broadband router unit. Other computers on this LAN will see it as their gateway. The subnet mask address must be the same as PCs onyour Subnet Mask: LAN. The default subnet mask address is 255.255.255.0 DHCP Home > DHCP DHCP Server To activate DHCP Server function. If you have another DHCP DHCP Server: server available on your network or your LAN IP are static, you s
ページ17に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu Lease Time: The amount of time for a DHCP server leased a IP address to a client. The IP address of the first default DNS server for the client DNS Server 1 IP for Client: requsting DHCP. DNS Server 2 IP The IP address of the second default DNS server for the client requsting DHCP. for Client: View DHCP List: This button is linked to the page DHCP client List. Setting Static Click here to configure static DHCP. DHCP: DHCP Client List Home > DH
ページ18に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu Setting Static DHCP Home > DHCP > Setting Static DHCP Static DHCP Host Name: This should be your computer name. This is your computer’s network adapter address. You can find MAC Address: this address by typing ipconfig /all under the command prompt mode of window NT /2000/XP, or winipcfg under window/95/98/ Me’s command prompt mode. Reserved IP The IP address you wish to assign to this host. Address: D-Link Systems, Inc. 18
ページ19に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu Load Balance Home > Load Balance Load Balance Configuration Load Balance: To determine how the traffic is shared among the WAN ports. Enable: This will allow you enable or disable the load balance feature. Load Balance Select the desired option to measure traffic. Base on: Loading Share: Enter the desired percent of traffic load for each WAN port. NAT Statistics NAT Statistics: The traffic statistics on NAT for WAN ports. Interface The traffic stati
ページ20に含まれる内容の要旨
DI-LB604 User’s Manual Using the Configuration Menu Advanced The Advanced tab provides the following configuration options: Host IP, Static Routing, Virtual Server, Applications, Multi DMZ, Filters, QoS and NAT. Host IP Advanced > Host IP Host IP The main purpose of this section is to define hosts on your LAN, Host IP: and assign them to groups. Groups are used by the Access Filter and Block URL features. You can also bind multiple PPPoE sessions to individual hosts on the LAN. Host Network Id
