ページ1に含まれる内容の要旨
DI-308
ISDN Router
User’s Guide
Rev. 02 (August 2000)
6DI308.…02
Printed in Taiwan
RECYCLABLE
ページ2に含まれる内容の要旨
Copyright Statement Copyright ©2000 D-Link Corporation No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976. Trademarks D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective owners. FCC Warning This equipme
ページ3に含まれる内容の要旨
Limited Warranty Hardware: D-Link warrants each of its hardware products to be free from defects in workmanship and materials under normal use and service for a period commencing on the date of purchase from D-Link or its Authorized Reseller and extending for the length of time stipulated by the Authorized Reseller or D-Link Branch Office nearest to the place of purchase. This Warranty applies on the condition that the product Registration Card is filled out and returned to a D-Link office withi
ページ4に含まれる内容の要旨
Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehörteile verwenden, die vom Hersteller zugelassen sind. 5. Das Gerät is vor Feuchtigkeit zu schützen. 6. Bei der Auf
ページ5に含まれる内容の要旨
Table of Contents INTRODUCTION..............................................................................................1 Product Features .........................................................................................................................1 Applications for your DI-308 ......................................................................................................3 Internet Access......................................................................................
ページ6に含まれる内容の要旨
Static ARP...............................................................................................................................................55 NAT Configuration .................................................................................................................................57 Configure NAPT for Special Ap[plication]s...........................................................................................66 Telnet/Discovery Enable....................................
ページ7に含まれる内容の要旨
APPENDIX C – IP PROTOCOL AND PORT NUMBERS.....................................112 IP Protocol Numbers ...............................................................................................................112 IP Port Numbers......................................................................................................................112 APPENDIX D - TECHNICAL SPECIFICATIONS.................................................113 APPENDIX E – COUNTRY ID NUMBERS.........................
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
DI-308 ISDN Remote Router Introduction Congratulations on your purchase of a D-Link DI-308 remote access router with integrated Ethernet switch and ISDN T/A. No larger than an ordinary modem, your router offers inexpensive yet complete telecommunications and internetworking solutions for your home or branch office. It is ideal for everything from Internet browsing to receiving calls from Remote Dial-in Users and making connections to other LANs via Remote Nodes. Distinguishing features of the DI
ページ10に含まれる内容の要旨
DI-308 ISDN Remote Router ISDN Leased Line If the router is set up for an ISDN leased line, it can automatically initialize the leased-line connection each time it is powered up. Standard Phone Jacks The router is equipped with two standard phone jacks for connecting telephones, fax machines, or modems. This allows the ISDN line to be used for voice as well as data calls. Dial On Demand The Dial On Demand feature allows a DI-308 to automatically place a call to a Remote Node whenever there is tr
ページ11に含まれる内容の要旨
DI-308 ISDN Remote Router Data Compression The DI-308 incorporates Stac data compression and CCP (Compression Control Protocol). Networking Compatibility The DI-308 is compatible with remote access products from other companies such as Ascend, Cisco, and 3Com. Furthermore, they support Microsoft Windows 95 and Windows NT remote access capability. Applications for your DI-308 Some applications for the DI-308 include: Internet Access Your DI-308 supports TCP/IP protocol, which is the language used
ページ12に含まれる内容の要旨
DI-308 ISDN Remote Router Chapter One, “Introduction,” describes many of the technologies implemented in the DI-308 as well as product features, etc. DI-308 to operate on your LAN. Chapter Two, “Installation,” is designed as a step-by-step guide to installing the router. Chapter Three, “Configuration and Management,” provides detailed explanations for the console program that is used to setup and configure the router. Chapter Four, “PROM System Configuration,” provides information on the PROM pr
ページ13に含まれる内容の要旨
DI-308 ISDN Remote Router Other Resources For more information about your DI-308 check the following sources: ♦ Quick Start Guide. ♦ Support disk containing RouteMan, a Windows-based configuration program. Packing List Before you proceed further, check all items you received with your DI-308 against this list to make sure nothing is missing. The complete package should include: ♦ One DI-308 ISDN router. ♦ One power adapter. ♦ One RS-232 cable. ♦ One unshielded twisted-pair (UTP) cable. ♦ One fre
ページ14に含まれる内容の要旨
DI-308 ISDN Remote Router Installation This chapter outlines how to connect your DI-308 to your LAN and ISDN line. Refer to the diagrams below to identify all of the ports on your device when you make connections. Ordering Your ISDN Line If you do not have an ISDN line installed already, we suggest that you order it from your telephone company as soon as possible to avoid the long waiting period common when ordering a new line. Use the information in this section to place the order. If you have
ページ15に含まれる内容の要旨
DI-308 ISDN Remote Router LINK/ACT— 1 through 8— These indicators light up when a port is connected to a powered-on Ethernet/Fast Ethernet station. The LEDs blink when information is transmitted or received on a port. 100/10M – 1 through 8— These indicators light up when a port is operating at 100Mbps. Otherwise, if this indicator is dark and the corresponding LINK indicator is lit, then the port is operating at 10Mbps. PHONE – 1— Lights up when standard phone port 1 is in use. PHONE – 2— Lights
ページ16に含まれる内容の要旨
DI-308 ISDN Remote Router Telephone Features Up to two telephones can be attached to the DI-308 router via the Phone 1 and Phone 2 telephone jacks located on the rear of the router. The router enables the attached telephones to have a number of features which may or may not be found on normal telephones and are described below. Additional features, which must be configured, are described in the Interface Configuration – ISDN submenu section of this manual. • Hold – This feature is very similar w
ページ17に含まれる内容の要旨
DI-308 ISDN Remote Router For the initial configuration of your DI-308, you must use an RS-232 console connection, either to a computer running serial communications software or to a serial data terminal. After the router has been successfully installed and the initial configuration is complete, you can continue to modify settings through the console, or you can change configuration settings through a remote Telnet connection or through a Web- based configuration utilization program. See the cha
ページ18に含まれる内容の要旨
DI-308 ISDN Remote Router Using the Console The Console Program is the interface that you will be using to configure your DI-308. Several operations that you should be familiar with before you attempt to modify the configuration of your router are listed below: • Moving the Cursor - Within a menu, use tab and arrow keys to navigate through different information fields. • Moving Forward to Another Menu - To move forward to a submenu below the current one, use tab or arrow keys to position the cur
ページ19に含まれる内容の要旨
DI-308 ISDN Remote Router or an end node using a cross-wired cable. Please note that when the Uplink port is in use, Port 1x is unavailable. Please refer to the following chart when deciding on the type of cable necessary for a given connection: DEVICE PORT DEVICE BEING PORT CABLE TO USE USED CONNECTED TYPE Normal Crossover (X) Hub or Switch Normal Uplink Straight-Through (||) Router Server (or PC) Straight-Through (||) Normal Straight-Through (||) Hub or Switch Uplink Uplink Crossover (X) Serve
ページ20に含まれる内容の要旨
DI-308 ISDN Remote Router Note that you can connect an end node through the Uplink jack, but to do so you must use a cross-wired cable or cable converter. Step 6 - Powering Up Devices for Initial Configuration Plug in the included 18V DC, 2.5A power adapter into the power jack on the router’s rear panel. You should have now connected the RS-232 cable to the console, the ISDN phone line, one or more Ethernet cables, and the power adapter. At this point in the installation process you can now pow
