ページ1に含まれる内容の要旨
This product can be set up using
any current web browser, i.e.,
DSL-G604T
Internet Explorer 6 or Netscape
ADSL Modem Router
Navigator 6.2.3.
Before You Begin
1. If you purchased this Router to share your high-speed Internet connection with other
computers, you must have an established Internet account from an Internet Service Provider
(ISP).
2. It is best to use the same computer that is connected to your ISP for configuring the DSL-
G604T ADSL Modem Router. The DSL-G604T
ページ2に含まれる内容の要旨
Connecting the Router to your Computer 1. First, connect the power adapter to the power input at the back panel of the DSL-G604T and then plug the other end of the power adapter to a wall outlet or power strip. On the front of the device, the Power LED will turn ON to indicate proper operation. 2. Insert one end of the Ethernet cable into an Ethernet port on the back panel of the DSL-G604T and the other end of the cable to an Ethernet Adapter or available Ethernet port on your comp
ページ3に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility Insert the CD-ROM into your PCs CD Drive. The Click’n Connect utility should appear automatically. If it does not appear, explore your CD-ROM drive within Windows, and double-click on the file “dslutility.exe” to start the utility manually. You can select one of five options: 1. User Manual: This option will open up the DSL-G604T user manual. You will need Adobe Acrobat Reader installed to view the manual. 2. Quick
ページ4に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 1 - Power Up the Device Follow the on- screen instructions, then Click Next to continue Connect the Power Adapter from the wall socket to the DSL-G604T. Wait for the Status LED to blink before proceeding onto the next step. 4
ページ5に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 2 – Connect the Device to your Computer Follow the on- screen instructions, then Click Next to continue Connect the Ethernet cable from the computer to one of the LAN ports (numbered 1 to 4) on the DSL-G604T now. Wait for the LAN Link LED for the correspo
ページ6に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 3 – Connect the Device to the ADSL Line Follow the on- screen instructions, then Click Next to continue Connect your ADSL telephone line from the wall socket to the DSL-G604T ADSL socket. Please note that if you are using an ADSL Splitter/Filter, you will
ページ7に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 4 – Checking Device Connectivity The Click’n Connect utility will now check the DSL-G604T to make sure it has been connected correctly. Once it has successfully detected your modem, it will proceed to the next step automatically. At this point, you may wa
ページ8に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 5 – ISP Configuration Select your Select your Country ISP Click Next to continue You will now be prompted to select your Country as well as your Internet Service Provider (ISP). If your ISP is not listed for your country, select Other and enter the det
ページ9に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 6 – Account Configuration Enter your ISP Username Enter your ISP Password Click Next to continue Re-Enter your ISP Password At this step, you will be required to enter your ADSL account Username, as provided by your ISP. You will also be required to enter
ページ10に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 7 – Set Wireless Connection Select your Click Next to Wireless Radio continue Preference You will now be asked if you would like to enable your Wireless Radio. The wireless radio is what the router uses to provide wireless networking functionality to you
ページ11に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. This section is only relevant if you enabled the Wireless Radio on your DSL-G604T Router at Step 7. If you disabled the Wireless Radio, please proceed to page 11. Step 7A – Set Wireless Connection Enter your SSID Name Select your Channel Click Next to continu
ページ12に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step- by-step. Follow the on-screen instructions, then proceed to the next step. Step 8 – Completing Setup Click Next to continue The Click’n Connect Utility will now save the settings you have entered to the DSL-G604T modem, and verify that you have entered your account details correctly to ensure an Internet connection can be established.
ページ13に含まれる内容の要旨
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step-by-step. Follow the on-screen instructions, then proceed to the next step. Step 9 – Setup Complete Click Finish to close the Click’n Connect Utility If you have arrived at this screen, this means that your Internet connection has been successfully established and all the details that you have entered are correct. 13
ページ14に含まれる内容の要旨
Configuring the Router via the Web Interface Now it is time to configure the Router. Enter 10.1.1.1 into the URL address box. Open your Web browser and type http://10.1.1.1 into the URL address box. Press Enter or Return. The login dialog appears: When you first log in, your Login Name is admin and your password is also admin. These may be changed later. 14
ページ15に含まれる内容の要旨
Configuring the Router via the Web Interface Once you have logged in, the Home directory tab is prominent with the setup Wizard window displayed. Most users will be able to use the setup wizard to establish the ADSL connection to your ADSL Internet Service Provider (ISP). To begin using the setup wizard, click on the Run Wizard button in the middle of the web page. Click the Run Wizard button. A pop-up window will appear. This pop-up window is the Setup Wizard. The Setup Wizard
ページ16に含まれる内容の要旨
Configuring the Router via the Web Interface The first Setup Wizard window lists a summary of the steps required to complete the setup. Click the Next button to begin setup. Click the Next button. 16
ページ17に含まれる内容の要旨
Configuring the Router via the Web Interface Configure the time zone used for the Router’s system clock. Select the appropriate time zone setting for your location. Click Next to continue. Select the time zone you are located in. Click the Next button. Next you will set the Internet connection type for the WAN interface. Click the Next button. 17
ページ18に含まれる内容の要旨
Configuring the Router via the Web Interface Configure the Internet connection type for the WAN interface. Your ISP has given this information to you. If you do not know what type of connection to use, exit the Setup Wizard and contact your ISP for the information. The Setup Wizard window that appears when you click the Next button depends on what connection type you select. The connection types available are PPPoE/PPPoA , Dynamic IP Address, Static IP Address, and Bridge Mode. Follow t
ページ19に含まれる内容の要旨
Configuring the Router via the Web Interface PPPoE / PPPoA Connection If you selected the PPPoE/PPPoA connection type in the previous window, you will see the Setup Wizard window pictured here. Type in the Username and Password used to identify and verify your account to the ISP. If you have been instructed to change the VPI number and VCI number, type in the new values. Select the Connection Type used for encapsulation specific to your service. Click Next to go to the Set Wireless LAN
ページ20に含まれる内容の要旨
Configuring the Router via the Web Interface Wireless LAN Connection Configure the SSID and Channel for the Wireless LAN. You may also configure either WEP or WPA security settings at this time or configure them later using the web manager. Select None to configure either WEP or WPA later. To disable the wireless access point, click the Enable AP option box to remove the green check mark. Click Next to continue to the final menu. Uncheck this box to disable the wireless Enter the S
