ページ1に含まれる内容の要旨
Quick Start Guide
Cisco 1720 Router Cabling and Installation
1 Cisco One-Year Limited Hardware Warranty Terms
2 Overview
3 Parts List
4 Install the Router
5 Verify Your Installation
6 For More Information
7 Obtaining Documentation
8 Documentation Feedback
9 Cisco Product Security Overview
10 Obtaining Technical Assistance
11 Obtaining Additional Publications and Information
ページ2に含まれる内容の要旨
1 Cisco One-Year Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com. 1. Launch your browser, and go to this URL: http://www.cisc
ページ3に含まれる内容の要旨
Complete the information below, and keep it for reference. Company product purchased from Company telephone number Product model number Product serial number Maintenance contract number 2 Overview This document describes the basic process of setting up and installing the Cisco 1720 router. Additional documentation can be found on Cisco.com. 3 Parts List Your router package should include the following items: • One Cisco 1700 series router • One blue RJ-45-to-DB-9 console cable • One black power
ページ4に含まれる内容の要旨
CONSOLE DSU 56K Cisco 1720 10/100 ETHERNET AUX SEE MANUAL BEFORE INSTALLATION FDX 100 LNK WIC1OK WIC0OK AUI 8 7 6 5 4 3 2 1 4 Install the Router Follow these steps to install the router. Connect the Router to the Local Network You need to provide a straight-through Ethernet cable for connecting the router to the local Ethernet network. For more information on these cables, refer to the “Cabling Specifications” chapter in the hardware installation guide that came with the router. Step 1 Connect o
ページ5に含まれる内容の要旨
CONSOLE FDX 100 LNK WIC1OK Cisco 1720 WIC0OK 10/100 ETHERNET AUX CONSOLE FDX 100 LNK WIC1OK Cisco 1720 WIC0OK 10/100 ETHERNET AUX DSU 56K SEE MANUAL BEFORE INSTALLATION Install the WAN Interface Card(s) Look for a WAN interface card in one or both of the two slots on the rear of the router. If a card is already installed, connect it to the WAN line according to the Cisco WAN Interface Cards Hardware Installation Guide that came with the card. To install a card in either slot, follow th
ページ6に含まれる内容の要旨
CONSOLE DSU 56K SEE MANUAL BEFORE INSTALLATION FDX LNK WIC1OK Cisco 1720 WIC0OK 10/100 ETHERNET AUX Connect a PC to the Router To use Cisco IOS software to configure the router, it must be connected to a terminal or to a PC with terminal-emulation software. Terminal emulation software should be configured with the following settings: 9600 baud, 8 data bits, no parity bits, and 1 stop bit. The Cisco 1700 Router Software Configuration Guide describes how to configure the router using Cisco IOS sof
ページ7に含まれる内容の要旨
CONSOLE DSU 56K SEE MANUAL BEFORE INSTALLATION FDX 100 LNK WIC1OK Cisco 1720 WIC0OK 10/100 ETHERNET AUX +5, +12, -12 VDC Connect the Power Supply Connect the router to the power supply as shown below. Step 1 Connect the attached power-supply cord to the power socket (labeled +5, +12, -12 VDC) on the router rear panel. Step 2 Connect the separate power cord to the power socket on the power supply. Step 3 Connect the other end of the separate power cord to a power outlet. Step 4 Turn on the router
ページ8に含まれる内容の要旨
5 Verify Your Installation After the router is powered on, the following LEDs confirm that you have correctly installed your router. Table 1 LEDs LED Location What to Look For PWR Front On when power is being supplied to the router. OK Front On when the router software is loaded and functional. Blinking when the router is running a power-on self-test (POST). Continuous blinking can indicate a problem with the router. Refer to the “Troubleshooting” chapter in the hardware installation guide for m
ページ9に含まれる内容の要旨
Documentation DVD Cisco documentation and additional literature are available in a Documentation DVD package, which may have shipped with your product. The Documentation DVD is updated regularly and may be more current than printed documentation. The Documentation DVD package is available as a single unit. Registered Cisco.com users (Cisco direct customers) can order a Cisco Documentation DVD (product number DOC-DOCDVD=) from the Ordering tool or Cisco Marketplace. Cisco Ordering tool: http://ww
ページ10に含まれる内容の要旨
Reporting Security Problems in Cisco Products Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you might have identified a vulnerability in a Cisco product, contact PSIRT: • Emergencies—security-alert@cisco.com • Nonemergencies—psirt@cisco.com Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product to encrypt any sensitive information that you sen
ページ11に含まれる内容の要旨
For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly. To open a service request by telephone, use one of the following numbers: Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227) EMEA: +32 2 704 55 55 USA: 1 800
ページ12に含まれる内容の要旨
Corporate Headquarters European Headquarters Americas Headquarters Asia Pacific Headquarters Cisco Systems, Inc. Cisco Systems International BV Cisco Systems, Inc. Cisco Systems, Inc. 170 West Tasman Drive Haarlerbergpark 170 West Tasman Drive Capital Tower San Jose, CA 95134-1706 Haarlerbergweg 13-19 San Jose, CA 95134-1706 168 Robinson Road USA 1101 CH Amsterdam USA #22-01 to #29-01 www.cisco.com The Netherlands www.cisco.com Singapore 068912 Tel: 408 526-4000 www-europe.cisco.com Tel: 408 526-
