ページ1に含まれる内容の要旨
AUGUST 2000
RM516 RM518 RM520 RM522
RM517 RM519 RM521 RM523
Single/Dual Rackmount Kits
Description
Use these Rackmount Kits (part numbers RM516 through RM523) to mount any of several models of our
converters and line drivers in 19" racks. They can be used to rackmount either a single unit or two units side by
side. For help deciding which Kit is right for a particular product, call Technical Support at 724-746-5500.
The examples shown in this sheet for single- and dual-unit installations feature
ページ2に含まれる内容の要旨
SINGLE/DUAL RACKMOUNT KITS Dual-Unit Installation The components that you’ll use for dual-unit installation are the two short brackets and two side rails. Take these steps, referring to the illustrations below: 1. Attach a bracket to each of the units’ cases (one bracket to one unit’s left side, one to the other unit’s right side) using two of the included screws and flatwashers. Insert the screws in the two front holes on the units’ sides. (Nuts are already in place, mounted on the side walls i
