ページ1に含まれる内容の要旨
April 2010
JPM816A-HD
JPM820A-HD
Category 6 High-Density Feed-Through Patch Panels
Provide patching without punching down the
®
BL A CK BOX
wires to the ports.
Meet CAT6 specifications.
Install in relay racks or communications cabinets.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 •
Support
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrenc
ページ2に含まれる内容の要旨
Category 6 High-Density Feed-Through Patch Panels Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. 1. Specifications Standards: TIA/EIA 568B.2-1, Category 6 Connectors: JPM816A-HD: (48) shielded RJ-45 on front; (48) shielded RJ-45 on back; JPM820A-HD: (48) unshielded RJ-45 on front; (48) unshielded RJ-45 on back
ページ3に含まれる内容の要旨
Category 6 High-Density Feed-Through Patch Panels 4. W hen using the shielded High-Density Feed-Through Patch Panels, make sure to attach the necessary drain wires. Use one drain wire for each shielded module on the patch panel. Attach the drain wire in either of the two places as shown in Figure 3-1. Connect the other end of the drain wire to proper ground. Lower right view Top left view Figure 3-1. Drain wire installation options for shielded models. 5. Use cable ties to secure the cables t
ページ4に含まれる内容の要旨
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 20 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 20 seconds or less. © Copyright
